1、BRITISH STANDARDBS EN 14879-2:2006Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Part 2: Coatings on metallic componentsThe European Standard EN 14879-2:2006 has the status of a British StandardICS 25.220.60g49g50g3g
2、38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Licensed Copy: Wang Bin, na, Mon Mar 26 02:02:54 GMT+00:00 2007, Uncontrolled Copy, (c) BSIBS EN 14879-2:2006
3、This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2007 BSI 2007ISBN 978-0-580-49918-0National forewordThis British Standard was published by BSI. It is the UK implementation of EN 14879-2:2006. The UK participation in its preparation
4、 was entrusted to Technical Committee ISE/16, Protective coatings and linings of metal pipes and fittings.A list of organizations represented on ISE/16 can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are respo
5、nsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.Amendments issued since publicationAmd. No. Date CommentsLicensed Copy: Wang Bin, na, Mon Mar 26 02:02:54 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEUROPEAN STANDARDNORME EUROPENNEEURO
6、PISCHE NORMEN 14879-2December 2006ICS 25.220.60English VersionOrganic coating systems and linings for protection of industrialapparatus and plants against corrosion caused by aggressivemedia - Part 2: Coatings on metallic componentsSystmes de revtements organiques de peinture et autresrevtements rap
7、ports pour la protection des appareils etinstallations industriels contre la corrosion par des milieuxagressifs - Partie 2: Revtements pour composantsmtalliquesBeschichtungen und Auskleidungen aus organischenWerkstoffen zum Schutz von industriellen Anlagen gegenKorrosion durch aggressive Medien - Te
8、il 2:Beschichtungen fr Bauteile aus metallischen WerkstoffenThis European Standard was approved by CEN on 25 October 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard withou
9、t any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made
10、by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greec
11、e, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Cen
12、tre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14879-2:2006: ELicensed Copy: Wang Bin, na, Mon Mar 26 02:02:54 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEN 14879-2:2006 (E) 2 Contents Pa
13、ge Foreword5 1 Scope 6 2 Normative references 6 3 Terms and definitions .7 4 General8 4.1 Selection criteria8 4.1.1 General8 4.1.2 Exposing media .8 4.1.3 Type and frequency of fluid loading11 4.1.4 Thermal loading .11 4.1.5 Changes in temperature11 4.1.6 Mechanical loading12 4.1.7 Climatic influenc
14、es 12 4.1.8 Additional requirements .12 4.2 Load profile 12 4.3 Requirements.12 4.3.1 Components.12 4.3.2 Coating materials.12 4.3.3 Coating system 13 4.3.4 Coated components 14 5 Coating systems 14 5.1 Laminate coating systems14 5.1.1 Coating system design .14 5.1.2 Description of layers .15 5.1.3
15、General requirements15 5.1.4 Coating process.17 5.1.5 Requirements for the coating system .19 5.2 Trowelled coating systems.20 5.2.1 Coating system design .20 5.2.2 Description of layers .21 5.2.3 General requirements21 5.2.4 Coating process.22 5.2.5 Requirements for the coating system .24 5.3 Spray
16、ed coating.26 5.3.1 Coating system design .26 5.3.2 Description of layers .26 5.3.3 General requirements27 5.3.4 Application .28 5.3.5 Requirements for the coating system .29 5.4 Powder coating 31 5.4.1 Coating system design .31 5.4.2 Description of layers .32 5.4.3 Component design and surface cond
17、ition33 5.4.4 Coating materials.33 5.4.5 Ambient conditions .34 5.4.6 Surface preparation.34 5.4.7 Application .34 5.4.8 Requirements for the coating system .34 5.5 Protection of existent coatings 36 5.5.1 General36 5.5.2 Packaging and handling .36 5.5.3 Storage37 5.5.4 Assembly 37 5.5.5 Repair37 6
18、Designation 38 Licensed Copy: Wang Bin, na, Mon Mar 26 02:02:54 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEN 14879-2:2006 (E) 3 6.1 Laminate coating.38 6.2 Trowelled coating38 6.3 Sprayed coating.39 6.4 Powder coating39 7 Testing39 7.1 General .39 7.2 Suitability testing.39 7.3 Receiving inspection
19、of coating material .40 7.3.1 General .40 7.3.2 Container marking.40 7.3.3 Viscosity or flow time40 7.3.4 Density40 7.3.5 Colour .40 7.3.6 Non-volatile matter content40 7.3.7 Gel time 40 7.3.8 Binders .40 7.4 Testing of coating systems during application40 7.4.1 General .40 7.4.2 Suitability of comp
20、onent for coating.40 7.4.3 Ambient conditions.41 7.4.4 Application method.41 7.4.5 Thickness of coating layers .41 7.5 Acceptance testing41 7.5.1 General .41 7.5.2 Acceptance testing of coated component41 7.5.3 Acceptance testing of specimens .41 7.6 Routine testing 42 7.7 Inspection report .42 8 Su
21、itability verification and tests 42 8.1 Requirements.42 8.1.1 General .42 8.1.2 Laboratory testing.43 8.1.3 In-service testing (field tests).45 8.1.4 Testing on reference objects .45 8.2 Tests .45 8.2.1 Sample bodies .45 8.2.2 Fluid load, resistance and tightness .45 8.2.3 Thermal loading.47 8.2.4 T
22、emperature change loading .47 8.2.5 Adhesion strength.47 8.2.6 Ageing behaviour 47 8.2.7 Dissipation capability48 Annex A (informative) Specimen form49 Annex B (informative) Information to be given by the coating material manufacturer .50 Annex C (informative) Information to be given by the coating
23、manufacturer 51 Annex D (informative) Resistance of resins to various chemicals at ambient temperature .52 Annex E (normative) Testing the dissipation capability .53 E.1 General .53 E.1.1 Dissipation resistance 53 E.1.2 Ground dissipating resistance.53 E.2 Testing the dissipation resistance of test
24、samples .53 E.2.1 Instruments 53 E.2.2 Test procedure.53 E.2.3 Test report53 E.3 Measuring the ground dissipation resistance on the laid surface protection system 54 E.3.1 Instruments 54 E.3.2 Preparation.54 Licensed Copy: Wang Bin, na, Mon Mar 26 02:02:54 GMT+00:00 2007, Uncontrolled Copy, (c) BSIE
25、N 14879-2:2006 (E) 4 E.3.3 Test procedure.54 E.3.4 Test report 55 Annex F (normative) Test fluid groups for verification of suitability for material/media combinations56 Annex G (informative) Selection criteria for surface protection systems .58 G.1 Load profiles and suitable protection for gutters,
26、 trenches, pipes etc58 G.2 Load profiles and suitable protection for containers 59 Annex H (informative) Sample form for acceptance inspection report .60 A-Deviation: National deviation due to regulations, the alteration of which is for the time being outside the competence of the CEN/CENELEC member
27、61 Bibliography 62 Licensed Copy: Wang Bin, na, Mon Mar 26 02:02:54 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEN 14879-2:2006 (E) 5 Foreword This document (EN 14879-2:2006) has been prepared by CEN/BT/Task Force 130 “Organic coating systems and linings for protection of industrial apparatus and pla
28、nts against corrosion caused by aggressive media”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2007, and conflicting national standards shall be w
29、ithdrawn at the latest by June 2007. EN 14879 “Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media“ consists of the following parts: Part 1: Terminology, design and preparation of substrate Part 2: Coatings on metallic co
30、mponents Part 3: Coatings on concrete components Part 4: Linings on metallic components Part 5: Linings on concrete components Part 6: Combined linings with tile and brick layers According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bo
31、und to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Den-mark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxem-bourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzer-
32、land and United Kingdom. Licensed Copy: Wang Bin, na, Mon Mar 26 02:02:54 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEN 14879-2:2006 (E) 6 1 Scope This European Standard specifies the requirements for and methods of testing of organic coatings which are applied to metallic process engineering equipme
33、nt that will come in contact with chemical substances (liquids, solids and gases). The requirements specified here may be used for the purposes of quality control (e.g. as agreed between the contract partners or been given by national regulations). The standard does not cover coatings as in EN ISO 1
34、2944-1, but it does apply to coatings which serve one or more of the following purposes: to protect the component from adverse effects of aggressive substances; to protect waters (e.g. ground water) against hazardous substances; to protect the charge from becoming contaminated by components released
35、 from the substrate material; to achieve a particular surface properties. The described coatings are to be used for metallic process engineering equipment that will come in contact with chemical substances. The different coating systems are: laminate coating systems which contain cold-curing resins;
36、 trowelled coating which contain cold-curing resins; sprayed coating systems which contain resins (in special cases, such coatings may also be applied by brushing, rolling, flow coating, dipping, or by other means, such as providing sleeving for nozzles); powder coating systems which contain organic
37、 materials (powder coatings may be used as corrosion pro-tection or for non-stick purposes). For design and preparation of substrate see EN 14879-1. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated refer-ences, only the editi
38、on cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 59, Glass reinforced plastics Measurement of hardness by means of a Barcol impressor EN 228, Automotive fuels Unleaded petrol Requirements and test methods EN 590, Automotiv
39、e fuels Diesel Requirements and test methods EN 13687-3, Products and systems for the protection and repair of concrete structures Test methods Determination of thermal compatibility Part 3: Thermal cycling without de-icing salt impact EN 14879-1:2005, Organic coating systems and linings for protect
40、ion of industrial apparatus and plants against corrosion caused by aggressive media Part 1: Terminology, design and preparation of substrate prEN 14879-4, Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Part 4: Lining
41、s on metallic components EN ISO 175, Plastics Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:1999) Licensed Copy: Wang Bin, na, Mon Mar 26 02:02:54 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEN 14879-2:2006 (E) 7 EN ISO 178, Plastics Determination of fl
42、exural properties (ISO 178:2001) EN ISO 291, Plastics Standard atmospheres for conditioning and testing (ISO 291:2005) EN ISO 527-3, Plastics Determination of tensile properties Part 3: Test conditions for films and sheets (ISO 527-3:1995) EN ISO 868, Plastics and ebonite Determination of indentatio
43、n hardness by means of a durometer (Shore hardness) (ISO 868:2003) EN ISO 2811-1, Paints and varnishes Determination of density Part 1: Pyknometer method (ISO 2811-1:1997) EN ISO 2811-2, Paints and varnishes Determination of density Part 2: Immersed body (plummet) method (ISO 2811-2:1997) EN ISO 281
44、5, Paints and varnishes Buchholz indentation test (ISO 2815:2003) EN ISO 3001, Plastics Epoxy compounds Determination of epoxy equivalent (ISO 3001:1999) EN ISO 3251, Paint, varnishes and plastics Determination of non-volatile-matter content (ISO 3251:2003) EN ISO 3882, Metallic and other inorganic
45、coatings Review of methods of measurement of thickness (ISO 3882:2003) EN ISO 4624, Paints and varnishes Pull-off test for adhesion (ISO 4624:2002) EN ISO 4625-1, Binders for paints and varnishes Determination of softening point Part 1: Ring-and-ball method (ISO 4625-1:2004) EN ISO 8503-2, Preparati
46、on of steel substrates before application of paints and related products Surface roughness characteristics of blast-cleaned steel substrates Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel Comparator procedure (ISO 8503-2:1988) EN ISO 12944-4, Paints and varnishes C
47、orrosion protection of steel structures by protective paint sys-tems Part 4: Types of surface and surface preparation (ISO 12944-4:1998) ISO 813, Rubber, vulcanized or thermoplastic Determination of adhesion to a rigid substrate 90 peel method ISO 2559, Textile glass Mats (made from chopped or conti
48、nuous strands) Designation and basis for specifications ISO 8130-2, Coating powders Part 2: Determination of density by gas comparison pyknometer (referee method) IEC 60093:1980, Methods of test for volume resistivity and surface resistivity of solid electrical insulating ma-terials IEC 60167, Metho
49、ds of test for the determination of the insulation resistance of solid insulating materials 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 14879-1:2005 and the following apply. Licensed Copy: Wang Bin, na, Mon Mar 26 02:02:54 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEN 14879-2:2006 (E) 8 3.1 fibre reinforced coatings resin coatings reinforced by means of glass, carbon or synthetic fibres, for the standard named “laminate
