1、BS EN 15258:2008ICS 91.100.30NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDPrecast concreteproducts Retainingwall elementsLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 17/12/2009 02:03, Uncontrolled Copy, (c) BSIThis British Standardwas published unde
2、rthe authority of theStandards Policy andStrategy Committee on 30September 2009 BSI 2009ISBN 978 0 580 55480 3Amendments/corrigenda issued since publicationDate CommentsBS EN 15258:2008National forewordThis British Standard is the UK implementation of EN 15258:2008.The UK participation in its prepar
3、ation was entrusted to TechnicalCommittee B/524, Precast concrete products.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct ap
4、plication.Compliance with a British Standard cannot confer immunityfrom legal obligations.Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 17/12/2009 02:03, Uncontrolled Copy, (c) BSIBS EN 15258:2008EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 15258October 2008ICS 91.100.30English Version
5、Precast concrete products - Retaining wall elementsProduits prfabriqus en bton - lments de murs desoutnementBetonfertigteile - SttzwandelementeThis European Standard was approved by CEN on 25 July 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the cond
6、itions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three
7、official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austri
8、a, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE
9、 FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15258:2008: ELicensed Copy: Wang Bin, ISO/EXC
10、HANGE CHINA STANDARDS, 17/12/2009 02:03, Uncontrolled Copy, (c) BSIBS EN 15258:2008EN 15258:2008 (E) 2 Contents Page The numbering of clauses is strictly related to EN 13369:2004, Common rules for precast concrete products, at least for the first three digits. When a clause of EN 13369:2004 is not r
11、elevant or included in a more general reference of this standard, its number is omitted and this may result in a gap on numbering. Foreword4 Introduction .6 1 Scope 7 2 Normative references 7 3 Terms and definitions .8 4 Requirements.8 4.1 Material requirements .8 4.2 Production requirements 8 4.2.1
12、 Concrete production .8 4.2.2 Hardened concrete 8 4.2.3 Structural reinforcement.8 4.3 Finished product requirements9 4.3.1 Geometrical properties .9 4.3.2 Surface characteristics .9 4.3.3 Mechanical resistance.9 4.3.5 Acoustic properties .9 4.3.6 Thermal properties 10 4.3.7 Durability 10 4.3.8 Othe
13、r requirements10 5 Test methods10 5.1 Tests on concrete 10 5.2 Measuring of dimensions and surface characteristics .10 5.2.1 General10 5.2.2 Position of reinforcement .10 5.2.3 Wall element dimensions11 5.3 Weight of the products11 5.4 Load test of elements11 6 Evaluation of conformity.11 7 Marking
14、.11 8 Technical documentation .11 Annex A (normative) Inspection schemes12 A.1 General12 A.2 Process inspection12 A.3 Finished product inspection.12 Annex B (informative) Examples of retaining wall elements 14 Annex C (informative) Mechanical resistance test of the restraint (stem-base) of precast e
15、lements for retaining cantilever walls 19 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive21 ZA.1 Scope and relevant characteristics .21 ZA.2 Procedure for attestation of conformity of retaining wall elements.22 ZA.2.1 Syste
16、m of attestation of conformity 22 ZA.2.2 EC Certificate and Declaration of conformity.24 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 17/12/2009 02:03, Uncontrolled Copy, (c) BSIBS EN 15258:2008EN 15258:2008 (E) 3 ZA.3 CE marking and labelling25 ZA.3.1 General .25 ZA.3.2 Declaration of geo
17、metrical data and material properties (method 1) 26 ZA.3.3 Declaration of product properties (method 2)28 ZA.3.4 Declaration of compliance with a given design specification provided by the client (method 3a) 29 ZA.3.5 Declaration of compliance with a given design specification provided by the manufa
18、cturer according to the clients order (method 3b).30 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 17/12/2009 02:03, Uncontrolled Copy, (c) BSIBS EN 15258:2008EN 15258:2008 (E) 4 Foreword This document (EN 15258:2008) has been prepared by Technical Committee CEN/TC 229 “Precast concrete pro
19、ducts”, the secretariat of which is held by AFNOR, and was examined by and agreed with a joint working party appointed by the Liaison Group CEN/TC 229-CEN/TC 250, particularly for its compatibility with structural Eurocodes. This European Standard shall be given the status of a national standard, ei
20、ther by publication of an identical text or by endorsement, at the latest by April 2009, and conflicting national standards shall be withdrawn at the latest by July 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or
21、CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EC Directive(s). For relationship with EC Direc
22、tive(s), see informative Annex ZA, which is an integral part of this document. This standard is one of a series of product standards for precast concrete products. For common aspects reference is made to EN 13369:2004: Common rules for precast products, from which also the relevant requirements of t
23、he EN 206-1: Concrete Part 1: Specification, performances, production and conformity are taken. The references to EN 13369:2004 by CEN/TC 229 product standards are intended to make them homogeneous and to avoid repetitions of similar requirements. Eurocodes are taken as a common reference for design
24、 aspects. The installation of some structural precast concrete products is dealt with by ENV 13670-1, Execution of concrete structures Part 1: Common rules, which has at the moment the status of an European prestandard. In all countries it can be accompanied by alternatives for national application
25、and it shall not be treated as a European standard. The programme of standards for structural precast concrete products comprises the following standards, in some cases consisting on several parts: EN 1168, Precast concrete products Hollow core slabs EN 12794, Precast concrete products Foundation pi
26、les EN 12843, Precast concrete products Masts and poles EN 13224, Precast concrete products Ribbed floor elements EN 13225, Precast concrete products Linear structural elements EN 13693, Precast concrete products Special roof elements EN 13747, Precast concrete products Floor plates for floor system
27、s EN 13978-1, Precast concrete products Precast concrete garages Part 1: Requirements for reinforced garages monolithic or consisting of single sections with room dimensions EN 14843, Precast concrete products Stairs Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 17/12/2009 02:03, Uncontroll
28、ed Copy, (c) BSIBS EN 15258:2008EN 15258:2008 (E) 5 EN 14844, Precast concrete products Box culverts EN 14991, Precast concrete products Foundation elements EN 14992, Precast concrete products Wall elements EN 15037-1, Precast concrete products Beam-and-block floor systems Part 1: Beams prEN 15037-2
29、, Precast concrete products Beam-and-block floor systems Part 2: Concrete blocks prEN 15037-3, Precast concrete products Beam-and-block floor systems Part 3: Clay blocks prEN 15037-4, Precast concrete products Beam-and-block floor systems Part 4: Polystyrene blocks prEN 15037-5, Precast concrete pro
30、ducts Beam-and-block floor systems Part 5: Lightweight blocks EN 15050, Precast concrete products Bridge elements EN 15258, Precast concrete products Retaining wall elements This standard defines in Annex ZA the application methods of CE marking to products designed using the relevant EN Eurocodes (
31、EN 1992-1-1:2004 and EN 1992-1-2:2004). Where, in default of applicability conditions of EN Eurocodes to the works of destination, design Provisions other than EN Eurocodes are used for mechanical strength, the conditions to affix CE marking to the product are described in ZA.3.4 and Z.A 3.5. Accord
32、ing to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia
33、, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 17/12/2009 02:03, Uncontrolled Copy, (c) BSIBS EN 15258:2008EN 15258:2008 (E) 6 Introduction T
34、he evaluation of conformity given in this standard refers to the precast elements which are supplied to the market and covers all the production operations carried out in the factory. For design rules reference is made to EN 1992-1-1:2004. Additional complementary rules are provided where necessary.
35、 Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 17/12/2009 02:03, Uncontrolled Copy, (c) BSIBS EN 15258:2008EN 15258:2008 (E) 7 1 Scope This European Standard deals with the requirements, the basic performance criteria and evaluation of conformity for precast elements made of plain, reinforc
36、ed or prestressed normal weight concrete, used for the construction of retaining walls. The products covered by this European Standard are intended to be used as part of retaining walls in applications such as: to retain natural ground excavations and trenches; to retain earth fills for roads, platf
37、orms, etc.; in bridge abutments and their flank walls; to retain several kinds of loose materials such as sand, gravel, etc. Some examples of precast elements considered in this European Standard are shown in the Informative Annex B. The products may be used in seismic areas on condition that they f
38、ulfil the requirements specific to this use. This European Standard does not cover: products for retaining walls of tanks or reservoirs of liquids; retaining wall elements up to a height of 1,0 m and those assembled to form retaining walls of up to 1,0 m in height (e.g. stacked flower boxes for dwar
39、f walls) if the corresponding retaining wall is used for secondary loads (max. horizontal earth fill and with light surcharge); products for stacked planting boxes, having only faade functions, and therefore not submitted to any loads (such as earth pressure loads, highway load effects, etc.); preca
40、st diaphragm walls (concrete sheet piling). 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any ame
41、ndments) applies. EN 1990:2002, Eurocode Basis of structural design EN 1992-1-1, Eurocode 2: Design of concrete structures Part 1-1: General rules and rules for buildings EN 13369:2004, Common rules for precast concrete products EN ISO 12572, Hygrothermal performance of building materials and produc
42、ts Determination of water vapour transmission properties (ISO 12572:2001) Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 17/12/2009 02:03, Uncontrolled Copy, (c) BSIBS EN 15258:2008EN 15258:2008 (E) 8 3 Terms and definitions For the purposes of this document, the terms and definitions given
43、in EN 13369:2004 and the following apply. 3.1 cantilever wall wall whose stability is obtained by its flexural and shear resistance connected to act compositely with a foundation slab 3.2 gravity resistant wall wall whose stability is obtained by the weight of its elements 3.3 reinforced soil wall w
44、all whose stability is obtained by means of reinforcing strips placed in layers inside the fill and anchored to precast concrete plates forming the facing that retains the earth 3.4 tied wall retaining wall which comprises ties connecting the wall with the foundation 4 Requirements 4.1 Material requ
45、irements 4.1 of EN 13369:2004 shall apply. 4.2 Production requirements 4.2.1 Concrete production 4.2.1 of EN 13369:2004 shall apply. 4.2.2 Hardened concrete 4.2.2.1 Strength classes 4.2.2.1 of EN 13369:2004 shall apply. 4.2.2.2 Compressive strength 4.2.2.2 of EN 13369:2004 shall apply. In addition,
46、the minimum concrete compressive strength at the time of delivery shall be declared. The concrete class shall not be less than C25/30 for retaining wall elements. 4.2.3 Structural reinforcement 4.2.3 of EN 13369:2004 shall apply. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 17/12/2009 02:0
47、3, Uncontrolled Copy, (c) BSIBS EN 15258:2008EN 15258:2008 (E) 9 4.3 Finished product requirements 4.3.1 Geometrical properties 4.3.1 of EN 13369:2004 shall apply. 4.3.2 Surface characteristics 4.3.2 of EN 13369:2004 shall apply. 4.3.3 Mechanical resistance 4.3.3.1 General 4.3.3 of EN 13369:2004 sha
48、ll apply except 4.3.3.4 which is not relevant. Complementarily to 4.3.3 of EN 13369:2004, 4.3.3.2 and 4.3.3.3 shall apply. 4.3.3.2 Verification by calculation aided by physical testing In the case physical testing on finished products is required to aid calculation according to 4.3.3.3 of EN 13369:2
49、004, Annex C describes a method for mechanical resistance test of the restraint (stem-base) on full scale specimens of precast elements for retaining cantilever walls. This test may serve to confirm design assumptions and/or substitute calculations if there are no adequate models for some details (e.g. gusset). 5.2(1), 5.2(2)P and 5.2(3) of EN 1990:2002 shall apply. 4.3.3.6 Transient situations The transient situations covered by this sub-clause relate to stor
