1、Energy performance of buildings - Method for calculation of system energy requirements and system efficienciesPart 4-2: Space heating generation systems, heat pump systems, Module M3-8-2, M8-8-2BS EN 15316-4-2:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROP
2、EAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15316-4-2 April 2017 ICS 91.140.10 Supersedes EN 15316-4-2:2008English Version Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-2: Space heating generation systems, heat pump system
3、s, Module M3-8-2, M8-8-2 Performance nergtique des btiments - Mthode de calcul des besoins nergtiques et des rendements des systmes - Partie 4-2 : Systmes de gnration de chauffage des locaux, systmes de pompes chaleur Module M3-8-2, M8-8-2 Energetische Bewertung von Gebuden - Verfahren zur Berechnun
4、g der Energieanforderungen und Nutzungsgrade der Anlagen - Teil 4-2: Wrmeerzeugung fr die Raumheizung, Wrmepumpensysteme, Modul M3-8-2, M8-8-2 This European Standard was approved by CEN on 27 February 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the
5、 conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard
6、exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national
7、 standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia,
8、 Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any
9、 means reserved worldwide for CEN national Members. Ref. No. EN 15316-4-2:2017 ENational forewordThis British Standard is the UK implementation of EN 15316-4-2:2017. It supersedes BS EN 15316-4-2:2008, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee RH
10、E/24, Heating systems and water based cooling systems in buildings.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct applicat
11、ion. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 87451 2ICS 91.140.10Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committ
12、ee on 30 June 2017.Amendments/corrigenda issued since publicationDate Text affected BRITISH STANDARDBS EN 15316-4-2:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15316-4-2 April 2017 ICS 91.140.10 Supersedes EN 15316-4-2:2008English Version Energy performance of buildings - Method for cal
13、culation of system energy requirements and system efficiencies - Part 4-2: Space heating generation systems, heat pump systems, Module M3-8-2, M8-8-2 Performance nergtique des btiments - Mthode de calcul des besoins nergtiques et des rendements des systmes - Partie 4-2 : Systmes de gnration de chauf
14、fage des locaux, systmes de pompes chaleur Module M3-8-2, M8-8-2 Energetische Bewertung von Gebuden - Verfahren zur Berechnung der Energieanforderungen und Nutzungsgrade der Anlagen - Teil 4-2: Wrmeerzeugung fr die Raumheizung, Wrmepumpensysteme, Modul M3-8-2, M8-8-2 This European Standard was appro
15、ved by CEN on 27 February 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationa
16、l standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language
17、 and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hu
18、ngary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUN
19、G CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15316-4-2:2017 EBS EN 15316-4-2:2017EN 15316-4-2:2017 (E) 2 Contents Page European foreword . 4 Introduction 5
20、1 Scope 6 2 Normative references 9 3 Terms and definitions . 9 4 Symbols and abbreviations 13 4.1 Symbols 13 4.2 Subscripts 13 5 Description of the methods 14 5.1 General . 14 5.2 Multiple heat generators . 14 5.3 System boundary 15 5.3.1 General . 15 5.3.2 Physical factors taken into account: 15 5.
21、4 Schematisation of the heat pump for heating 15 5.5 Energy input needed to meet the heat requirements for heat pumps system. 16 5.6 Auxiliary energy (WHW;gen;aux) . 18 5.7 Recoverable, recovered and unrecoverable heat losses . 18 5.8 Calculation by zones 18 5.9 Combined heating and domestic hot wat
22、er preparation . 19 6 Generation with heat pump systems - Energy calculation (hourly, bin) Method A 19 6.1 Output data . 19 6.2 Input data 20 6.3 Multiple heat generators . 26 6.4 Calculation time steps 26 6.5 Flow chart . 26 6.6 Energy requirements for space heating and DHW mode for the time step c
23、onsidered . 27 6.7 COP and energy used for heating, storage and domestic hot water 28 6.8 Auxiliary energy (WH;gen;aux) 39 6.9 Energy used from the heat source 39 6.10 Calculation of back-up heater 40 6.11 Total losses and total recoverable heat losses of the generation subsystem. 40 7 Method B Mont
24、hly and annual energy calculation method . 43 7.1 Calculation time steps 43 7.2 Output data . 43 7.3 Principle of the calculation method B. 43 7.4 Additional input Data . 44 7.5 Construction of the bins Step 1 46 7.6 Determination of energy requirement of the single bins Step 2 . 50 7.7 Determinatio
25、n of thermal performance of the heat pump (step 3) . 52 7.8 Determination of back-up energy of the single bins (step 4) . 53 7.9 Calculation of auxiliary energy input (step 5) . 53 BS EN 15316-4-2:2017EN 15316-4-2:2017 (E) 3 7.10 Calculation of recoverable generation subsystem losses (step 6) . 53 7
26、.11 Calculation of the energy from the heat source (step 7) 54 7.12 Calculation of the total driving energy input to cover the requirements (step 8) 54 8 Quality control . 54 8.1 Hourly, bin or monthly method . 54 8.2 Main sources of errors 55 9 Compliance check . 55 Annex A (normative) Template for
27、 input data 56 A.1 Heat pump description data . 56 A.2 System design data . 60 A.3 Operating conditions . 62 Annex B (informative) Default values 64 B.1 Heat pump description data . 64 B.2 System design data . 68 B.3 - Operating conditions 70 Annex C (informative) Tables of COP and energy at full lo
28、ad 72 C.1 General . 72 C.2 Air Water electrically driven heat pumps 72 C.3 COP and energy for exhaust air/ water electrically driven heat pump 73 C.4 COP and energy for water or brine/ water electrically driven heat pump . 74 C.5 Air/water combustion-engine driven heat pumps . 75 Annex D (normative)
29、 Adaptation of the COP to different conditions of temperature conditions 77 D.1 Principle . 77 D.2 Application to electrically-driven heat pump 78 D.3 Application to thermally-driven heat pumps . 78 D.4 Correction of COP with adaptation to the operational temperature spread 79 D.5 Tests results form
30、 EN 14825 82 D.6 Input data for the calculation of COP and capacity at operating conditions . 82 Bibliography . 84 BS EN 15316-4-2:2017EN 15316-4-2:2017 (E) 4 European foreword This document (EN 15316-4-2:2017) has been prepared by Technical Committee CEN/TC 228 “Heating systems and water based cool
31、ing systems in buildings”, the secretariat of which is held by DIN. This document supersedes EN 15316-4-2:2008. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2017, and conflicting nation
32、al standards shall be withdrawn at the latest by October 2017. The revision keeps the main principles of the calculation unchanged but the structure of the document was changed. Informative content was removed to the accompanying technical report CEN/TR 15316-6-2. The provisions cover also other ene
33、rgy carriers than heat now. The values may be altered in a national annex. Calculation methods to determine energy source indicators like the renewable energy ratio have been added. The main changes compared to EN 15316-4-2:2008 are: a) type of heat pumps are now limited to hot water production at t
34、he output of the condenser; b) informative content was removed to the accompanying technical report CEN/TR 15316-6-2; c) calculation for performance of the heat pumps at different conditions is based on interpolation provisions; d) input data for energy performance of the heat pumps are based on par
35、t load and/or full load information; e) Annex A contains a template for the data and parameters used in the standards and Annex B a set of default values. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. Attention is dra
36、wn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries ar
37、e bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Po
38、rtugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 15316-4-2:2017EN 15316-4-2:2017 (E) 5 Introduction This European Standard is part of a series of standards aiming at international harmonization of the methodology for the assessment of the
39、energy performance of buildings, called “set of EPB standards”. All EPB standards follow specific rules to ensure overall consistency, unambiguity and transparency. All EPB standards provide a certain flexibility with regard to the methods, the required input data and references to other EPB standar
40、ds, by the introduction of a normative template in Annex A and Annex B with informative default choices. EPB standards deal with energy performance calculation and other related aspects (like system sizing) to provide the building services considered in the EPBD. CEN/TC 228 deals with heating system
41、s in buildings. Subjects covered by CEN/TC 228 are: energy performance calculation for heating systems; inspection of heating systems; design of heating systems; installation and commissioning of heating systems. This standard specifies to take into account the energy performance of heat pump system
42、s used for domestic or heating purpose. For the correct use of this standard, Annex A is to be used to specify the choices with the required input data. Default values are presented in Annex B. In case the standard is used in the context of national or regional legal requirements, mandatory choices
43、may be given at national or regional level for such specific applications, in particular for the application within the context of EU Directives transposed into national legal requirements. These choices can be made available as National Annex or as separate (e.g. legal) document. It is expected, if
44、 the default values and choices in Annex A are not followed due to national regulations, policy or traditions, that: either the national standardization body will consider the possibility to add or include a National Annex in agreement with the template of Annex A. or the national or regional author
45、ities will, in the building regulations, reference the standard and prepare data sheets containing the national or regional choices and values, in agreement with the template of Annex A. This updated standard covers hourly, monthly, annual time-steps and temperatures classes (bin method). BS EN 1531
46、6-4-2:2017EN 15316-4-2:2017 (E) 6 1 Scope This European Standard covers heat pumps for space heating, heat pump water heaters (HPWH) and heat pumps with combined space heating and domestic hot water production in alternate or simultaneous operation, where the same heat pump delivers the heat to cove
47、r the space heating and domestic hot water heat requirement. The standard provides a calculation method under steady conditions that corresponds to one calculation step. The results of this calculation are incorporated in larger building models and take in account the influence of the external condi
48、tions and building control that influence the energy requirements for heating supplied by the heat pump system. The scope of this part is to standardize the: required inputs; calculation methods; required outputs Generation for space heating and domestic hot water production of the following heat pu
49、mp systems, including control of: electrically-driven vapour compression cycle (VCC) heat pumps; combustion engine-driven vapour compression cycle heat pumps; thermally-driven vapour absorption cycle (VAC) heat pumps, using combinations of heat source and heat distribution listed in Table 1. Table 1 Heating sources and energy distribution Source Distribution Outdoor air Exhaust-air Water Indirect ground source with brine Indirect ground source with water Direct ground source (Direct expansion (DX) Surfac
