1、 g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Method using high-performance liquid chromatography (HPLC)The European Standard EN 15360:2007 has t
2、he status of a British StandardICS 65.080Fertilizers Determination of dicyandiamide BRITISH STANDARDBS EN 15360:2007BS EN 15360:2007This British Standard was published under the authority of the Standards Policy and Strategy Committee on 29 June 2007 BSI 2007ISBN 978 0 580 50881 3Amendments issued s
3、ince publicationAmd. No. Date Commentscontract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.National forewordThis British Standard was published by BSI. It is the UK implementation of EN 15360:2007. The UK partici
4、pation in its preparation was entrusted to Technical Committee CII/37, Fertilisers and related chemicals.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a EUROPEAN STANDARDN
5、ORME EUROPENNEEUROPISCHE NORMEN 15360May 2007ICS 65.080 Supersedes CEN/TS 15360:2006 English VersionFertilizers - Determination of dicyandiamide - Method using high-performance liquid chromatography (HPLC)Engrais - Dtermination de la teneur en dicyandiamide -Mthode par chromatographie liquide haute
6、performance(HPLC)Dngemittel - Bestimmung von Dicyandiamid - Verfahrenmit Hochleistungs-Flssigchromatographie (HPLC)This European Standard was approved by CEN on 13 April 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Euro
7、peanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English,
8、 French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cypru
9、s, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT E
10、UROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2007 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15360:2007: EEN 15360:2007 (E) 2 Contents Page Foreword3 1 Scope 4 2 Nor
11、mative references 4 3 Principle4 4 Reagents.4 5 Apparatus .4 6 Sampling and sample preparation.5 7 Procedure .5 8 Calculation6 9 Precision.6 10 Notes on procedure.7 11 Test report 7 Annex A (informative) Results of the inter-laboratory trial .8 Bibliography 9 EN 15360:2007 (E) 3 Foreword This docume
12、nt (EN 15360:2007) has been prepared by Technical Committee CEN/TC 260 “Fertilizers and liming materials”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by
13、November 2007, and conflicting national standards shall be withdrawn at the latest by November 2007. This document supersedes CEN/TS 15360:2006. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. According to the CEN/CENEL
14、EC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembo
15、urg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 15360:2007 (E) 4 1 Scope This document specifies a method for the selective determination of dicyandiamide (DCD) in addition to all the other forms of nitrogen fixations,
16、 particularly in fertilizers to which DCD has been added as a nitrification inhibiting agent. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edi
17、tion of the referenced document (including any amendments) applies. EN 1482-2, Fertilizers and liming materials Sampling and sample preparation Part 2: Sample preparation EN ISO 3696, Water for analytical laboratory use Specification and test methods (ISO 3696:1987) 3 Principle The sample is dissolv
18、ed or suspended in water using an ultrasonic bath. Methyl dicyandiamide is added to the filtered solution as the internal standard. The solution is then transferred onto a C18 reversed-phase column using a bypass injector and then separated. For detection, a UV-detector is used at a wavelength of 22
19、0 nm. 4 Reagents Use only reagents of recognized analytical grade and water conforming to grade 2 of EN ISO 3696. 4.1 Dicyandiamide standard solution Weigh 50 mg of dicyandiamide of known purity into a 1 000 ml volumetric flask and dissolve in water; make up the volume to the mark. Pipette 10 ml of
20、this solution into a 100 ml volumetric flask and, after having added 10 ml of internal standard solution (4.2), make up the volume to the mark with water. 4.2 Internal standard solution Weigh 50 mg of methyl dicyandiamide of known purity into a 1 000 ml volumetric flask, dissolve in water and make u
21、p the volume to the mark. 4.3 Methanol HPLC-grade purity 5 Apparatus 5.1 Ultrasonic bath 5.2 Membrane filter 0,45 m, with the usual filtration equipment. EN 15360:2007 (E) 5 5.3 HPLC apparatus UV-detector for variable wavelengths and an electronic integrator, sample injection valve equipped with a 2
22、0 l bypass injector. 6 Sampling and sample preparation Sampling is not part of the method specified in this document; however, a recommended sampling method is given in EN 1482-1. Sample preparation shall be carried out in accordance with EN 1482-2. 7 Procedure 7.1 Preparing the analytical solution
23、Weigh to the nearest 0,001 g, between 0,8 g and 1,5 g of the ground and thoroughly homogenized test sample (corresponding to approximately 50 mg of DCD) and mix with 750 ml of water into a 1 000 ml volumetric flask and dissolve using an ultrasonic bath (5.1). Those portions that have not dissolved a
24、fter 5 min are disregarded. Make up the volume to the mark with water. Filter one part of the homogenized sample solution (approximately 50 ml) through the membrane filter (5.2) into a dry vessel. Pipette 10 ml of this filtrate into a 100 ml volumetric flask and, after having added 10 ml of the inte
25、rnal standard solution (4.2), make up the volume to the mark with water. 7.2 HPLC conditions Eluent: Mixture of water and methanol (4.3), (99 + 1) parts by volume Separation column and packing: 250 mm x 4,6 mm C18 reversed-phase column Column temperature: Room temperature Flow rate: 1,0 ml/min Wavel
26、ength: 220 nm7.3 HPLC determination Alternately, transfer the standard solution (4.1) and the test solution (7.1) onto the separation column three times, applying the standard solution before the test solution. Measure the peak areas for DCD and methyl dicyandiamide. EN 15360:2007 (E) 6 8 Calculatio
27、n Calculate the proportion in the standard solution (4.1), Pxaccording to the following equation: 21xAAP = (1) where A1is the peak area for DCD (4.1); A2is the peak area of the internal standard. Calculate the proportion in the test solution (7.1), Pxaccording to the following equation: 23xAAP = (2)
28、 where A2is the peak area of the internal standard; A3is the peak area for DCD (of 7.1). Take from each of the groups three values for Pxand Px, the mean values PxMand PxM, and calculate the DCD content of the sample, expressed in g/100 g using the following equation: mPxmPxw=MMDCD(3) where PxMis th
29、e mean value of the proportions for the sample; PxMis the mean value of the proportions for the standard; m is the mass of DCD in the standard solution (4.1) (50 mg), in milligrams; m is the mass of the sample in the aliquot part of the test solution (7.1) used, in milligrams. If necessary, correct
30、the final result depending on the purity of the DCD used for the standard solution. 9 Precision 9.1 General The precision of the method has been determined in an inter-laboratory trial, carried out and evaluated in 1997 according to ISO 5725-1. A summary of the results is given in Annex A. The value
31、s derived from this inter-laboratory trial might not be applicable to concentration ranges and matrices other than those given. EN 15360:2007 (E) 7 9.2 Repeatability The absolute difference between two independent single test results obtained using the same method on identical test material in the s
32、ame laboratory by the same operator using the same equipment within short time intervals, will exceed the values for the repeatability limit r, given in Table 1, on average in no more than 5 % of cases. 9.3 Reproducibility The absolute difference between two independent single test results obtained
33、using the same method on identical test material in different laboratories by different operators using different equipment will exceed the values for the reproducibility limit R, given in Table 1, on average in no more than 5 % of cases. Table 1 Precision data Sample Level g/100 g r g/100 g R g/100
34、 g No 1 (Alzon 27/1) 2,41 0,089 98 0,466 7 No 2 (Alzon 27/2) 2,18 0,073 7 0,329 10 Notes on procedure 10.1 As described, the method covers a range between 2 g and 10 g of DCD per 100 g. By variation of the weighed portion and the extent of dilution, DCD contents of between (0,1 g and 100 g) per 100
35、g can be determined. 10.2 The method may also be carried out using an external standard. In this case the equation for the calculation has to be modified accordingly. 11 Test report The test report shall include at least the following information: a) information necessary for complete identification
36、 of the sample; b) test method used, making reference to this document, i.e. EN 15360; c) test results together with the units used to express them; d) date the test was finished; e) statement as to whether the requirement for the repeatability limit has been fulfilled; f) procedural steps not speci
37、fied in this document or carried out optionally, as well as details of any circumstances that occurred while carrying out the method that might have influenced the result(s). EN 15360:2007 (E) 8 Annex A (informative) Results of the inter-laboratory trial The precision of the method was determined in
38、 1997 during an inter-laboratory trial with respectively 13 and 12 laboratories participating and carried out on 2 samples of fertilizer. The statistical results are given in Table A.1. Table A.1 Statistical results of the inter-laboratory trial Parameter Sample No 1 Sample No 2 Year of the test 199
39、7 Number of participating laboratories 13 12 Number of laboratories after eliminating outliers 13 12 Level mean value, (g/100 g) 2,41 2,18 Repeatability standard deviation sr, (g/100 g) 0,03 0,03 Coefficient of variation CVr(%) 1,348 1,218 Repeatability limit r (2,83 sr) (g/100 g) 0,089 98 0,073 7 R
40、eproducibility standard deviation, sR(g/100 g) 0,168 4 0,118 7 Coefficient of variation CVR(%) 6,99 5,44 Reproducibility limit R (2,83 sR) (g/100 g) 0,466 7 0,329 EN 15360:2007 (E) 9 Bibliography 1 Vilsmeier, K., 1984: Bestimmung von Dicyandiamid, Nitrit und Nitrat in Bodenextrakten mit Hochdruckfls
41、sigkeitschromatographie. Zeitschrift fr Pflanzenernhrung, Dngung und Bodenkunde 147, page 264 to 268 2 ISO 5725-1, Accuracy (trueness and precision) of measurement methods and results Part 1: General principles and definitions 3 EN 1482-1, Fertilizers and liming materials Sampling and sample prepara
42、tion Part 1: Sampling 4 Regulation (EC) No 2003/2003 of the European Parliament and of the Council of 13 October 2003 relating to fertilisers, Official Journal L 304, 21/11/2003, P. 0001-0194 BS EN BSI389 Chiswick High RoadLondonW4 4AL15360:2007BSI British Standards InstitutionBSI is the independent
43、 national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they posses
44、s the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity o
45、f which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and
46、 foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-.In response to orders for international standards, it is BSI policy to supply the BSI i
47、mplementation of those that have been published as British Standards, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic
48、information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-.Subscribing members of BSI are kept up to date with standards developments and receive substantial discount
49、s on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-.Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- information about BSI is available on the BSI website at http:/www.bsi-.CopyrightCopyright subsists in all BSI
