1、Energy Performance of Buildings Control for heating, ventilating and air conditioning applicationsPart 1: Electronic individual zone control equipment Modules M3-5, M4-5, M5-5BS EN 15500-1:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordThis Brit
2、ish Standard is the UK implementation of EN 15500-1:2017. It supersedes BS EN 15500:2008 , which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee RHE/16, Performance requirements for control systems.A list of organizations represented on this committee can be
3、 obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 91973 2ICS 91.140.30; 97.120C
4、ompliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2017.Amendments/corrigenda issued since publicationDate Text affected BRITISH STANDARDBS EN 15500-1:2017E
5、UROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 155001May 2017ICS 91.140.30; 97.120 Supersedes EN 15500:2008EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGCENCENELEC Management Centre: Avenue Marnix 17, B1000 Brussels 2017 CEN Ref. No. EN 15500-1:2
6、017: EAll rights of exploitation in any form and by any means reserved worldwide for CEN national MembersEnergy Performance of Buildings Control for heating, ventilating and air conditioning applications Part 1: Electronic individual zone control equipment Modules M3-5, M4-5, M5-5Performance nergtiq
7、ue des btiments Rgulation pour les applications de chauffage, de ventilation et de climatisation (CVC) Partie 1 : Rgulateur lectronique de zone pour le chauffage Modules M3-5, M4-5, M5-5Energieeffizienz von Gebuden Automation von HLK-Anwendungen Teil 1: Elektronische Regel- und Steuereinrichtungen f
8、r einzelne Rume oder Zone Module M3-5, M4-5, M5-5This European Standard was approved by CEN on 27 February 2017.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alt
9、eration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language mad
10、e by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estoni
11、a, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.English VersionEN 1550
12、01:2017 (E)European foreword 4Introduction . 51 Scope . 62 Normative references 73 Terms and definitions . 84 Symbols, subscripts and abbreviations .104.1 Symbols 104.2 Subscripts . 104.3 Abbreviations 105 Functionality 115.1 General 115.1.1 Functional objective .115.1.2 Minimum operating mode 115.1
13、.3 Controller functions .115.2 Individual zone control applications 135.2.1 General. 135.2.2 Water Systems .135.2.3 Air- / Water-Systems .155.2.4 Electrical Systems 235.3 Functionality and hardware . 255.3.1 General. 255.3.2 Power supply and data protection 255.3.3 Inputs of the controller .255.3.4
14、Outputs of the controller . 265.3.5 Sensor requirements .265.3.6 Actuator requirements 275.4 Temperature control accuracy . 275.4.1 Introduction 275.4.2 General. 275.4.3 Definition of CV and CSD 285.4.4 Definition of the control accuracy CA .295.4.5 Temperature control accuracy compliance .305.5 Use
15、r Interface (UI) 305.6 Electrical requirements 305.6.1 General. 305.6.2 Supply voltage .305.6.3 Protection against electric shock 305.6.4 Electromagnetic compatibility 305.6.5 Degrees of protection315.6.6 Environmentally induced stress due to temperature .315.6.7 Materials 316 Test method 316.1 Powe
16、r supply and data protection 316.2 Operating modes 316.2.1 Economy mode .316.2.2 Frost/Building protection . 316.3 Temperature control accuracy compliance . 326.4 Electrical tests 326.5 Supply voltage . 326.6 Protection against electric shock . 326.7 Electromagnetic compatibility . 326.8 Degrees of
17、protection . 322Contents PageBS EN 15500-1:2017EN 155001:2017 (E)6.9 Environmental individual stress due to temperature 327 Classification and designation 328 Marking and documentation 338.1 Marking 338.2 Documentation 338.2.1 Installation instructions . 338.2.2 User operating instructions. 33Biblio
18、graphy .35 ISO ISO pub-date year All rights reserved 3BS EN 15500-1:2017EN 155001:2017 (E)European forewordThis document (EN 15500-1:2017) has been prepared by Technical Committee CEN/TC 247 “Building Automation, Controls and Building Management”, the secretariat of which is held by SNV.This Europea
19、n Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2017, and conflicting national standards shall be withdrawn at the latest by November 2017.Attention is drawn to the possibility that some of the eleme
20、nts of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights.This document supersedes EN 15500:2008 .The most important changes are: Respect the presentation of this project in the frame EPB in accordance with the drafting
21、rules; Non-normative content is in CEN/TR 15500-2:2016; Function blocks and block diagrams (informative) removed; Individual zone control applications: new structured and clearly arranged.This document is part of the set of standards on the energy performance of buildings (the set of EPB standards)
22、and has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association (Mandate M/480, 15), and supports essential requirements of EU Directive 2010/31/EC on the energy performance of buildings (EPBD, 16).In case this standard is used in the context of
23、national or regional legal requirements, mandatory choices may be given at national or regional level for such specific applications, in particular for the application within the context of EU Directives transposed into national legal requirements.Further target groups are users of the voluntary com
24、mon European Union certification scheme for the energy performance of non-residential buildings (EPBD art.11.9) and any other regional (e.g. Pan European) parties wanting to motivate their assumptions by classifying the building energy performance for a dedicated building stock.This document has bee
25、n prepared under a mandate given to CEN by the European Commission and the European Free Trade Association.According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cro
26、atia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Tur
27、key and the United Kingdom.4BS EN 15500-1:2017EN 155001:2017 (E)IntroductionThis standard is part of a series of standards aiming at international harmonization of the methodology for the assessment of the energy performance of buildings, called “EPB set of standards”.As part of the “EPB set of stan
28、dards” it complies with the requirements for the set of basic EPB documents EN ISO 52000-1:2017 (see Normative references), CEN/TS 16628 and CEN/TS 16629 (see bibliography 2 and 3) developed under a mandate given to CEN by the European Commission and the European Free Trade Association (Mandate M/48
29、0), and supports essential requirements of EU Directive 2010/31/EU on the energy performance of buildings (EPBD).The standards issued by TC 247 for M/480 belong to the EPB set of standards and are in line with the over-arching standard (EN ISO 52000-1:2017) and drafted in accordance with the basic p
30、rinciples and detailed technical rules developed in the Phase I of the mandate.Also these standards are clearly identified in the modular structure developed to ensure a transparent and coherent EPB standard set. BAC (Building Automation and Control) is identified in the modular structure as Technic
31、al Building System M10. However, the standards of TC 247 deal with control accuracy, control functions and control strategies using standards communications protocol (these last standards do not belong to the EPB standards set).To avoid a duplication of calculation due to the BAC (avoid double impac
32、t), no calculation are done in BAC EPB standard set, but in each underlying standard of EPB set of standards (from M1 to M9 in the Modular Structure), an IDENTIFIER developed and present in the M10 covered by EN 15232-1:2015 is used where appropriate. These way of interaction is described in detaile
33、d in the Technical Report (CEN ISO/TR 52000-2:2017) accompanying the over-arching standard. As consequence, the Annex A and Annex B concept as EXCEL sheet with the calculation formulas used in the EPB standards are not applicable for the standards issued by TC 247 for M/480.The main target groups of
34、 this standard are all the users of the set of EPB standards (e.g. architects, engineers, regulators).Further target groups are parties wanting to motivate their assumptions by classifying the building energy performance for a dedicated building stock.More information is provided in the Technical Re
35、port accompanying this standard (CEN/TR 15500-2:2016 5).5BS EN 15500-1:2017EN 155001:2017 (E)1 ScopeThe purpose of this European Standard is to specify the applications, functionality set and application performance for electronic individual zone control equipment.The applications are for cooling an
36、d hot water or electrical heating. This European Standard applies specifically to individual zone control equipment for maintaining temperature, humidity and air flow as a function of occupancy and demand operated with auxiliary electrical energy.Information required for the operation of the equipme
37、nt may be processed using either analogue or digital techniques or a combination of both. Safety requirements remain unaffected by this European Standard.This European Standard refers to the input and output requirements of the controller and not of the input and output devices as e.g. sensors and a
38、ctuators.This European Standard covers fixed-function, configurable and programmable controllers. The control equipment may or may not be connected to a data-network however communications aspects are not covered by this standard. These devices could be applied for any kind of building, intermittent
39、 or non-intermittent occupation, residential or non-residential.Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in EN ISO 52000-1:2017.NOTE 1 In CEN ISO/TR 52000-2:2017 the same table can be found, with, for each
40、 module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation.NOTE 2 The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a
41、simplified and a detailed method respectively.Table 1 Position of this standard (in casu M35, M45, M55), within the modular structure of the set of EPB standardsOverarching Building (as such)Technical Building SystemSubmoduleDescriptions Descriptions DescriptionsHeatingCoolingVentilationHumidificati
42、onDehumidificationDomestic Hot watersLightingBuilding automation and controlPV, wind, sub1 M1 M2 M3 M4 M5 M6 M7 M8 M9 M10 M111 General General General 2Common terms and definitions; symbols, units and subscriptsBuilding Energy NeedsNeeds 3 Application(Free) Indoor Conditions without SystemsMaximum L
43、oad and Power4Ways to Express Energy Perfor-manceWays to Express Energy Perfor-manceWays to Express Energy Perfor-manceaThe shaded modules are not applicable. 6 BS EN 15500-1:2017EN 155001:2017 (E)Overarching Building (as such)Technical Building SystemSubmoduleDescriptions Descriptions DescriptionsH
44、eatingCoolingVentilationHumidificationDehumidificationDomestic Hot watersLightingBuilding automation and controlPV, wind, sub1 M1 M2 M3 M4 M5 M6 M7 M8 M9 M10 M115Building Functions and Building BoundariesHeat Transfer by TransmissionEmission and controlx x x 6Building Occupancy and Operating Conditi
45、onsHeat Transfer by Infiltration and VentilationDistribution and control7Aggregation of En-ergy Services and Energy CarriersInternal Heat Gains Storage and control 8Building Parti-tioningSolar Heat GainsGeneration and control9Calculated Energy PerformanceBuilding Dynamics (thermal mass)Load dispatch
46、ing and operating conditions10Measured Energy PerformanceMeasured Energy PerformanceMeasured Energy Performance11 Inspection Inspection Inspection 12Ways to Express Indoor ComfortBMS 13External Environ-ment Conditions14 aEconomic Calcu-lationaThe shaded modules are not applicable. 2 Normative refere
47、ncesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.EN I
48、SO 52000-1:2017, Energy performance of buildings Overarching EPB assessment Part 1: General framework and proceduresCEN/TR 15500-2:2016, Control for heating, ventilating and air-conditioning applications Part 2: Accompanying TR prEN 15500-1:2015 Modules M3-5,M4-5,M5-5EN 12098-1 , Controls for heatin
49、g systems Part 1: Control equipment for hot water heating systems7BS EN 15500-1:2017EN 155001:2017 (E)EN 12098-3 , Controls for heating systems Part 3: Control equipment for electrical heating systemsEN 12098-5 , Controls for heating systems Part 5: Start-stop schedulers for heating systemsEN 60529 , Degrees of protection provided by enclosures (IP Code) (IEC 60529)EN 60730 (all parts), Automatic electrical controls for household and similar use (IEC 60730)EN
