1、Licensed Copy: Hong Ling, ISO/EXCHANGE CHINA STANDARDS, 04/12/2007 05:47, Uncontrolled Copy, (c) BSIg49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58
2、phosphorus, magnesium, potassium, iron, zinc, copper, manganese, cobalt, molybdenum, arsenic, lead and cadmium by ICP-AESThe European Standard EN 15510:2007 has the status of a British StandardICS 65.120Animal feeding stuffs Determination of calcium, sodium, BRITISH STANDARDBS EN 15510:2007BS EN 155
3、10:2007Licensed Copy: Hong Ling, ISO/EXCHANGE CHINA STANDARDS, 04/12/2007 05:47, Uncontrolled Copy, (c) BSIThis British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2007 BSI 2007ISBN 978 0 580 56881 7Amendments issued since publicationAmd. No
4、. Date CommentsCompliance with a British Standard cannot confer immunity from legal obligations.National forewordThis British Standard is the UK implementation of EN 15510:2007.The UK participation in its preparation was entrusted to Technical Committee AW/10, Animal feeding stuffs.A list of organiz
5、ations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 15510August 2007ICS 65.120Engl
6、ish VersionAnimal feeding stuffs - Determination of calcium, sodium,phosphorus, magnesium, potassium, iron, zinc, copper,manganese, cobalt, molybdenum, arsenic, lead and cadmium byICP-AESAliments des animaux - Dtermination des teneurs encalcium, sodium, phosphore, magnsium, potassium, fer,zinc, cuiv
7、re, manganse, cobalt, molybdne, arsenic,plomb et cadmium par ICP-AESFuttermittel - Bestimmung von Calcium, Natrium,Phosphor, Magnesium, Kalium, Eisen, Zink, Kupfer,Mangan, Cobalt, Molybdn, Arsen, Blei und Cadmiummittels ICP-AESThis European Standard was approved by CEN on 30 June 2007.CEN members ar
8、e bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to th
9、e CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same st
10、atus as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania,
11、Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2007 CEN All rights of exploitation in any form and by any means reservedworldwid
12、e for CEN national Members.Ref. No. EN 15510:2007: ELicensed Copy: Hong Ling, ISO/EXCHANGE CHINA STANDARDS, 04/12/2007 05:47, Uncontrolled Copy, (c) BSIEN 15510:2007 (E) 2 Contents Page Foreword3 1 Scope 4 2 Normative references 4 3 Terms and definitions .4 4 Principle5 5 Reagents.5 6 Apparatus, usu
13、al laboratory apparatus and, in particular, the following. .7 7 Sampling.7 8 Preparation of the test sample .8 9 Procedure .9 10 Calculation and expression of the result 13 11 Precision.15 12 Test report 20 Annex A (informative) Results of the interlaboratory test.21 Annex B (informative) Notes on t
14、he detection technique, interferences and quantification 26 Bibliography 29 Licensed Copy: Hong Ling, ISO/EXCHANGE CHINA STANDARDS, 04/12/2007 05:47, Uncontrolled Copy, (c) BSIEN 15510:2007 (E) 3 Foreword This document (EN 15510:2007) has been prepared by Technical Committee CEN/TC 327 “Animal feedi
15、ng stuffs Methods of sampling and analysis”, the secretariat of which is held by NEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2008, and conflicting national standards shall be wit
16、hdrawn at the latest by February 2008. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Gre
17、ece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy: Hong Ling, ISO/EXCHANGE CHINA STANDARDS, 04/12/2007 05:47, Uncontrolled Copy, (c) BSIEN 15510
18、:2007 (E) 4 1 Scope This European Standard specifies inductively coupled plasma atomic emission spectroscopy (ICP-AES) method for the determination of: minerals calcium, sodium, phosphorus, magnesium and potassium and the elements iron, zinc, copper, manganese, cobalt, molybdenum in animal feeding s
19、tuffs, elements arsenic, lead and cadmium in minerals on their own, in pre-mixtures or mixtures for use in animal nutrition. The method detection limit for each element is dependent on the sample matrix as well as of the instrument. The method is not applicable for determination of low concentration
20、s of elements. The limit of quantification should be 3 mg/kg or lower. NOTE This method can also be used for the determination of minerals in products with high mineral content ( 5%), yet for this purpose, other more precise analytical techniques are available. 2 Normative references The following r
21、eferenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN ISO 3696, Water for analytical laboratory use Specification a
22、nd test methods (ISO 3696:1987) ISO 6498, Animal feeding stuffs Preparation of test samples 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 limit of detection (LOD) smallest measured content from which it is possible to deduce the presence of
23、 the analyte with reasonable statistical certainty NOTE The limit of detection is numerically equal to three times the standard deviation of the mean of blank determinations (n 10, were n = number of measures) performed under reproducibility conditions. 3.2 limit of quantification (LOQ) lowest conte
24、nt of the analyte that can be measured with reasonable statistical certainty NOTE If both trueness and precision are constant over a concentration range around the limit of detection, then the limit of quantification is numerically equal to ten times the standard deviation of the mean of blank deter
25、minations (n 10, were n = number of measures) performed under reproducibility conditions. 3.3 feed additives substances are feed additives when they comply with the definition of feed additives given in regulation EU 1831/2003 3.4 animal feeding stuffs substances that comply with the definition of a
26、nimal feeding stuffs given in regulation EU 178/2002 Licensed Copy: Hong Ling, ISO/EXCHANGE CHINA STANDARDS, 04/12/2007 05:47, Uncontrolled Copy, (c) BSIEN 15510:2007 (E) 5 4 Principle For the determination of the minerals calcium, sodium, phosphorus, magnesium and potassium and the elements iron, z
27、inc, copper, manganese, cobalt, molybdenum, a test portion of the sample is ashed and dissolved in hydrochloric acid (in the case of organic feeding stuffs) or wet digested with hydrochloric acid (in the case of mineral compounds). For the determination of the elements arsenic, cadmium and lead, a t
28、est portion of the sample is wet digested with nitric acid. The concentration of the elements calcium, sodium, phosphorus, magnesium, potassium, iron, zinc, copper, manganese, cobalt, molybdenum, arsenic, cadmium and lead is determined by inductively coupled plasma atomic emission spectrometry (ICP-
29、AES) using external calibration or standard addition technique. WARNING Use of this European Standard can involve hazardous materials, operations and equipment. This standard does not purport to address all the safety problems associated with its use. It is the responsibility of the user of this Eur
30、opean Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 5 Reagents Use only reagents of recognized analytical grade, unless otherwise specified. 5.1 Water, complying with grade 2 as defined in EN ISO 3696. 5.2 Nitric
31、 acid, concentrated, not less than 65 % (mass fraction), having a density of approximately (HNO3) 1,42 g/ml. 5.3 Dilute nitric acid, to be prepared by mixing 1 volume of nitric acid (5.2) with 1 volume of water. 5.4 Nitric acid solution of 5 % (m/v), to be prepared: pipette 160 ml of dilute nitric a
32、cid (5.3) into a 1 000 ml volumetric flask (6.7) and fill to the mark with water. 5.5 Nitric acid solution of 2 % (v/v), to be prepared: pipette 20 ml of nitric acid (5.2) into a 1 000 ml volumetric flask (6.7) and fill to the mark with water. 5.6 Hydrochloric acid, concentrated, not less than 30 %
33、(mass fraction), having a density of approximately (HCl) 1,15 g/ml. 5.7 Dilute hydrochloric acid, to be prepared by mixing 1 volume of hydrochloric acid (5.6) with 1 volume of water. 5.8 Hydrochloric acid solution of 1 % (m/v), to be prepared: pipette 60 ml of dilute hydrochloric acid (5.7) into a 1
34、 000 ml volumetric flask (6.7) and fill to the mark with water. 5.9 Element stock solutions Ca, Na, P, Mg, K, Fe, Zn, Cu, Mn, Co, Mo, Cd, Pb, As c = 1 000 mg/l. The user should choose a suitable stock solution. Both single-element stock solutions and multi-element stock solutions with adequate speci
35、fication stating the acid used and the preparation technique are commercially available. It is advisable to use certified stock solutions. Licensed Copy: Hong Ling, ISO/EXCHANGE CHINA STANDARDS, 04/12/2007 05:47, Uncontrolled Copy, (c) BSIEN 15510:2007 (E) 6 Stock solutions are not to be used after
36、the expiry date. NOTE Element stock solutions with concentrations different from 1 000 mg/l may also be used. 5.10 Standard solutions 5.10.1 General Depending on the scope, different multi-element standard solutions may be necessary. In general, when combining multi-element standard solutions, their
37、 chemical compatibility and the possible hydrolysis of the components shall be regarded. Spectral interferences from other elements in multi-element standard solutions also need to be considered (Annex B.2.2). The examples given below also consider the measuring range of various inductively coupled
38、plasma atomic emission spectrometers and the expected concentration of the element in animal feeding stuffs. The multi-element standard solutions are considered to be stable for several months, if stored in the dark. Other combinations of elements at different concentrations can be used, provided th
39、at the element stock solutions (5.9) are diluted with the same acid and equal concentration as the acid in the test solution to a range of standards that covers the concentrations of the elements to be determined. 5.10.2 Multi-element standard solution Minerals in 1 % HCl c (Ca, Na, P, Mg, K) = 40 m
40、g/l Pipette 40,0 ml of each element stock solution (Ca, Na, P, Mg, K) (5.9) into a 1 000 ml volumetric flask (6.7). Add 60 ml of dilute hydrochloric acid (5.7). Fill to the mark with water and transfer to a suitable storage bottle. 5.10.3 Multi-element standard solution - Fe, Zn, Cu, Mn, Co, Mo in 1
41、 % HCl c (Fe, Zn, Cu, Mn, Co, Mo) = 50 mg/l Pipette 50,0 ml of each element stock solution (Fe, Zn, Cu, Mn, Co, Mo) (5.9) into a 1 000 ml volumetric flask (6.7). Add 60 ml of dilute hydrochloric acid (5.7). Fill to the mark with water and transfer to a suitable storage bottle. 5.10.4 Multi-element s
42、tandard solution Cd, Pb, As in 5 % HNO3c (Cd, Pb, As) = 100 mg/l Pipette 100,0 ml of each element stock solution (Cd, Pb, As) (5.9) into a 1000 ml volumetric flask (6.7). Add 160 ml dilute nitric acid (5.3). Fill to the mark with water and transfer to a suitable storage bottle. Licensed Copy: Hong L
43、ing, ISO/EXCHANGE CHINA STANDARDS, 04/12/2007 05:47, Uncontrolled Copy, (c) BSIEN 15510:2007 (E) 7 6 Apparatus, usual laboratory apparatus and, in particular, the following. 6.1 Laboratory grinder 6.1.1 Use laboratory grinders that are equipped such that they do not lead to contamination of the samp
44、les. 6.1.2 Laboratory grinder capable of grinding to a particle size of less than or equal to 1 mm, e.g. a knife mill or equivalent. 6.1.3 Laboratory grinder capable of grinding to a particle size of less than or equal to 0,1 mm, e.g. a ball mill or equivalent. 6.1.4 Mortar with pestle, free of cont
45、amination. 6.2 Analytical balance, capable of weighing to an accuracy of 1 mg. 6.3 Electric hot plate, with temperature control. 6.4 Ashing crucibles, of platinum, quartz or porcelain. 6.5 Electric muffle-furnace, capable of being maintained at a temperature of 450 C 20 C. The real temperature in th
46、e furnace has to be checked, because this temperature may be substantially different from the adjust temperature. 6.6 Beaker, of capacities 100 ml, 250 ml. 6.7 One-mark volumetric flasks, of capacities 100 ml, 500 ml, 1 000 ml. 6.8 Inductively coupled plasma Atomic Emission Spectrometer The instrume
47、nt shall be equipped with a radial plasma as a minimum requirement; an axial plasma is equally acceptable. Background correction shall also be performed when necessary. Settings of the working conditions (e.g. viewing height, gas flows, RF or plasma power, sample uptake rate, integration time, numbe
48、r of replicates, ) shall be optimised according the manufacturers instructions. 6.9 Freeze drying equipment, capable of freeze-drying liquid animal feeding stuffs. 7 Sampling Sampling is not part of the method specified in this Standard. A recommended sampling method is given in EN ISO 6497. It is i
49、mportant that the laboratory receives a sample that is truly representative and has not been damaged or changed during transport or storage. Licensed Copy: Hong Ling, ISO/EXCHANGE CHINA STANDARDS, 04/12/2007 05:47, Uncontrolled Copy, (c) BSIEN 15510:2007 (E) 8 8 Preparation of the test sample 8.1 General Prepare the test sample in accordance with ISO 6498. Grinding must be carried out in conditions such that the substance is not appreciably heated. Operation is to be repeated as many times as is necessary and it must be affected as quickly a
