1、BSI Standards PublicationBS EN 15755-1:2014Glass in building Adhesivebacked polymeric filmed glassPart 1: Definitions and requirementsBS EN 15755-1:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 15755-1:2014.The UK participation in its preparation was entr
2、usted to TechnicalCommittee B/520/4, Properties and glazing methods.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplicatio
3、n. The British Standards Institution 2014. Published by BSI StandardsLimited 2014ISBN 978 0 580 83889 7ICS 81.040.20; 83.140.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy C
4、ommittee on 31 August 2014.Amendments issued since publicationDate Text affectedBS EN 15755-1:2014EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15755-1 August 2014 ICS 81.040.20; 83.140.10 English Version Glass in building - Adhesive backed polymeric filmed glass - Part 1: Definitions and req
5、uirements Verre dans la construction - Verre avec film polymre adhsif - Partie 1: Dfinitions et exigences Glas im Bauwesen - Glas mit selbstklebender Polymerfolie -Teil 1: Begriffe und Anforderungen This European Standard was approved by CEN on 15 May 2014. CEN members are bound to comply with the C
6、EN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management C
7、entre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
8、the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Neth
9、erlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All ri
10、ghts of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15755-1:2014 EBS EN 15755-1:2014EN 15755-1:2014 (E) 2 Contents Page Foreword 4 Introduction .5 1 Scope 6 2 Normative references 6 3 Terms and definitions .7 4 Glass substrate 9 5 Product defini
11、tions . 10 5.1 General . 10 5.2 Solar control 10 5.3 Safety . 10 5.4 Security 11 5.4.1 General . 11 5.4.2 Resistance to manual attack . 11 5.4.3 Resistance to explosive pressure . 11 5.4.4 Resistance to ballistic attack . 11 5.5 RFI/EMI shielding 12 5.6 Anti-graffiti . 12 5.7 Decorative 12 5.8 Low e
12、missivity 12 5.9 Ultraviolet reduction . 12 5.10 Privacy . 12 6 Determination of the durability of adhesive backed polymeric filmed glass . 12 6.1 General . 12 6.2 Humidity test . 13 6.2.1 Principle . 13 6.2.2 Size and number of test specimens 13 6.2.3 Preparation of adhesive backed polymeric filmed
13、 glass specimens 13 6.2.4 Cleaning of filmed glass specimens . 13 6.2.5 Conditioning of test specimens 13 6.2.6 Test procedure Test without condensation 13 6.2.7 Visual Inspection 13 6.2.8 Determination of adhesion using peel test 14 6.2.9 Assessment of results . 14 6.2.10 Acceptance criteria . 14 6
14、.2.11 Test report . 14 7 Appearance . 15 7.1 General . 15 7.2 Detection of defects 15 7.2.1 General . 15 7.2.2 Artificial sky . 15 7.2.3 Daylight illumination 15 7.3 Conditions of examination . 15 7.3.1 General . 15 7.3.2 Glass substrate defects . 17 7.3.3 Adhesive backed polymeric film defects . 17
15、 7.3.4 Adhesive backed polymeric film installation defects . 18 BS EN 15755-1:2014EN 15755-1:2014 (E) 3 7.4 Acceptance criteria for adhesive backed polymeric filmed glass defects 19 8 Product information 21 8.1 General . 21 Annex A (informative) Guidelines for installation of adhesive backed polymer
16、ic film 22 A.1 General . 22 A.2 Wet lamination . 22 A.2.1 General . 22 A.2.2 General Points . 22 A.2.3 Installation 22 A.2.3.1 Prepare for the installation . 22 A.2.3.2 Clean the glazing . 23 A.2.3.3 Install the adhesive backed polymeric film to the glazing 23 A.2.3.4 Squeegee the film first procedu
17、re 24 A.2.3.5 Trim the film . 25 A.2.3.6 Finish the squeegee process second procedure 25 A.2.3.7 Housekeeping 25 A.2.3.8 Safety films 200 26 A.3 Dry installation . 26 Annex B (informative) Film to glass compatibility and thermal stress 27 Bibliography 28 BS EN 15755-1:2014EN 15755-1:2014 (E) 4 Forew
18、ord This document (EN 15755-1:2014) has been prepared by Technical Committee CEN/TC 129 “Glass in building”, the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest b
19、y February 2015, and conflicting national standards shall be withdrawn at the latest by February 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all suc
20、h patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European St
21、andard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
22、Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 15755-1:2014EN 15755-1:2014 (E) 5 Introduction Adhesive backed polymeric filmed glass is glass which has had its properties and performance modified by the application of adhesive backed polymeric film. There are a number of different
23、types of films that are manufactured to modify specific properties of glass, including: solar energy transmittance, visible light transmittance, emissivity, Ultra Violet transmittance, privacy, appearance, impact behaviour, security, electromagnetic frequency (EMF) attenuation, and surface protectio
24、n. BS EN 15755-1:2014EN 15755-1:2014 (E) 6 1 Scope This European Standard defines the characteristics, properties and classification of adhesive backed polymeric filmed glass, i.e. glass product that has had an adhesive backed polymeric film applied, for use in buildings. The adhesive backed polymer
25、ic film is based on biaxially oriented polyester film as defined in EN 15752-1. This applies to both site and factory applications. This European Standard does not apply to adhesive backed polymeric films manufactured using polyvinylchloride (PVC). Other requirements, not specified in this standard,
26、 may apply to adhesive backed polymeric filmed glass that is incorporated into assemblies, e.g. laminated glass or insulating glass units. The additional requirements are specified in the appropriate product standard. Adhesive backed polymeric filmed glass, in this case, does not lose its mechanical
27、 or thermal characteristics. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced
28、document (including any amendments) applies. EN 356, Glass in building - Security glazing - Testing and classification of resistance against manual attack EN 410, Glass in building - Determination of luminous and solar characteristics of glazing EN 572-1, Glass in building - Basic soda lime silicate
29、 glass products - Part 1: Definitions and general physical and mechanical properties EN 572-2, Glass in building - Basic soda lime silicate glass products - Part 2: Float glass EN 572-7, Glass in building - Basic soda lime silicate glass products - Part 7: Wired or unwired channel shaped glass EN 67
30、3, Glass in building - Determination of thermal transmittance (U value) - Calculation method EN 1063, Glass in building - Security glazing - Testing and classification of resistance against bullet attack EN 12600, Glass in building - Pendulum test - Impact test method and classification for flat gla
31、ss EN 12898, Glass in building - Determination of the emissivity EN 15752-1:2014, Adhesive backed polymeric film Definitions and description EN 50147-1, Anechoic chambers - Part 1: Shield attenuation measurement EN ISO 8510-2, Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assemb
32、ly - Part 2: 180 degree peel (ISO 8510-2) ISO 16933, Glass in building Explosion-resistant security glazing Test and classification for arena air-blast loading CIE 13.3:1995, Method of Measuring and Specifying Colour Rendering Properties of Light Sources BS EN 15755-1:2014EN 15755-1:2014 (E) 7 3 Ter
33、ms and definitions For the purposes of this document, the terms and definitions given in EN 15752-1:2014 and the following apply. 3.1 adhesive backed polymeric filmed glass glass substrate (see Clause 4) to which has been applied an adhesive backed polymeric film as defined in EN 15752-1 in order to
34、 modify one or more of its properties 3.2 release liner disposable layer designed to protect the adhesive coating prior to installation 3.3 dry lamination installation of an adhesive backed polymeric film by removal of the release liner and direct lamination to the glass substrate surface without us
35、ing water-based solutions Note 1 to entry: Dry lamination is normally done using machinery incorporating a roller system within a clean room. 3.4 wet lamination installation of an adhesive backed polymeric film by removal of the release liner, wetting the exposed adhesive with a water-detergent solu
36、tion, and lamination to the substrate surface 3.5 general appearance defects these are either visual or optical faults caused by the film or by its application Note 1 to entry: These are defined in 3.5.1 to 3.5 19 3.5.1 uniformity defect slight visible variation in colour, in reflection or transmiss
37、ion, within an adhesive backed polymeric filmed glass pane or from pane to pane 3.5.2 stain defect in the filmed glass larger than a punctual defect, often irregularly shaped, partially of mottled structure 3.5.3 punctual defect punctual disturbance of the visual transparency whilst looking through
38、the glass and of the visual reflectance looking at the glass Note 1 to entry: Spots, pinholes, gels and particulates are types of punctual defect. 3.5.3.1 spot defect that commonly looks dark against the surrounding film area, when viewed in transmission 3.5.3.2 pinhole punctual void in one or more
39、film layers that normally contrasts clear relative to the surrounding film area when viewed in transmission BS EN 15755-1:2014EN 15755-1:2014 (E) 8 3.5.3.3 scratch variety of linear score marks, whose visibility depend on their length, depth, width, position and arrangements 3.5.4 cluster accumulati
40、on of very small defects giving the impression of a stain 3.5.5 gel a visible variation in the adhesive caused by additional polymerisation within the adhesive or by coagulation seen as a point of distortion 3.5.6 distortion disturbing visible variation in optical sharpness of objects viewed through
41、 the adhesive backed polymeric filmed glass 3.5.7 distortion line disturbing visible variation seen as a line in optical sharpness of objects viewed through the adhesive backed polymeric filmed glass 3.5.8 air bubble pocket of air trapped between the adhesive backed polymeric film and the glass subs
42、trate 3.5.9 water bubble pocket of trapped installation solution between the adhesive backed polymeric film and the glass substrate 3.5.10 particulate contamination particulate trapped between the adhesive backed polymeric film and the glass substrate 3.5.11 haze light that is scattered upon passing
43、 through the adhesive backed polymeric filmed glass that produces a misty field of vision when objects are viewed through the adhesive backed polymeric filmed glass 3.5.12 non-uniform colour appearance visible variation in colour, in reflection or transmission, within an adhesive backed polymeric fi
44、lmed glass Note 1 to entry: Slight variations are not considered a defect. Note 2 to entry: Slight colour differences may exist when joining two or more pieces of film on a large pane of glass. 3.5.13 peeling separation of the adhesive backed polymeric film from the glass 3.5.14 delamination separat
45、ion of the polymeric layers in the adhesive backed polymeric film BS EN 15755-1:2014EN 15755-1:2014 (E) 9 3.5.15 iridescence visible effect due to film construction consisting of rainbow-like, luminous or gleaming colours that change colour and intensity with viewing position Note 1 to entry: Irides
46、cence is not a defect. 3.5.16 demetallisation partial or complete loss of one or more of the metal layers within the adhesive backed polymeric film 3.5.17 surface impression localised or repeating pattern of indentations in the adhesive backed polymeric film visible as a non-uniformity 3.5.18 crease
47、 line in the adhesive backed polymeric film caused by folding the film during manufacture or installation 3.5.19 edge defect serrations and cuts caused by incorrect trimming of the adhesive backed polymeric film during installation 4 Glass substrate The following types of glass products, in accordan
48、ce with appropriate ENs, can be used as substrates for adhesive backed polymeric filmed glass: Basic soda lime silicate glass products EN 5721 to 8 Special basic products - Borosilicate glasses EN 17481-1 Special basic products - Glass ceramics EN 17482-1 Special basic products - Alkaline earth sili
49、cate glass EN 141781 Silvered float glass EN 10361 Thermally toughened soda lime silicate safety glass EN 121501 Heat strengthened soda lime silicate glass EN 18631 Chemically strengthened soda lime silicate glass EN 123371 Heat soaked thermally toughened soda lime silicate safety glass EN 141791 Thermally toughened borosilicate safety glass EN 130241 Thermally toughened alkaline earth silicate safety glass EN 143211 Laminated and laminated safety glass EN ISO 12543-2, 3 Coated glass EN 10961 Basic alumino silicate glass products prEN 156811 Heat s
