1、BS EN 15876-1:2016Electronic fee collection Evaluation of on-board androadside equipment forconformity to EN 15509Part 1: Test suite structure and test purposesBSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN 15876-1:2016 BRITISH STANDARDNational forewordThis Br
2、itish Standard is the UK implementation of EN 15876-1:2016. It supersedes BS EN 15876-1:2010+A1:2012 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee EPL/278, Intelligent transport systems.A list of organizations represented on this committee can be obt
3、ained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 92284 8 ICS 35.240.60 Compliance
4、with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2016.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS EN 15876-1:2016EUROPEAN STANDA
5、RD NORME EUROPENNE EUROPISCHE NORM EN 15876-1 October 2016 ICS 35.240.60 Supersedes EN 15876-1:2010+A1:2012English Version Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to EN 15509 - Part 1: Test suite structure and test purposes Perception de tlpage - Eval
6、uation de conformit de lquipement embarqu et de lquipement au sol la EN 15509 - Partie 1: Structure des suites de tests et intention des tests Elektronische Gebhrenerhebung - Konformittsprfung von Fahrzeuggerten und straenseitigen Einrichtungen nach EN 15509 - Teil 1: Struktur und Zweck des Prfprogr
7、amms This European Standard was approved by CEN on 5 September 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographic
8、al references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility
9、of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of M
10、acedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION E
11、UROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15876-1:2016 EBS EN 15876-1:2016EN 15876-1:2016 (E) 2 Contents Page European forewo
12、rd . 7 Introduction 8 1 Scope 9 2 Normative references 9 3 Terms and definitions . 9 4 Abbreviations 11 5 Conformance 12 6 Test Suite Structure . 12 6.1 Structure 12 6.2 Reference to Conformance Specifications . 13 6.3 Test Purposes 13 6.3.1 TP Definition Conventions 13 6.3.2 TP Naming Conventions .
13、 14 Annex A (normative) Test Purposes for On-Board Units 16 A.1 Introduction . 16 A.2 Physical Layer 16 A.2.1 BV Test Purposes 16 A.2.2 BI Test Purposes . 18 A.3 MAC 18 A.3.1 BV Test Purposes 18 A.3.2 BI Test Purposes . 19 A.4 LLC . 24 A.4.1 BV Test Purposes 24 A.4.2 BI Test Purposes . 25 A.5 Applic
14、ation Layer . 27 A.5.1 Introduction and general conventions . 27 A.5.2 Structure of BST and VST . 28 A.5.2.1 BST . 28 A.5.2.2 VST . 29 A.5.3 PDUs Parameters . 32 A.5.3.1 Parameters of request PDUs (security level 0) . 32 A.5.3.2 Parameters of request PDUs (security level 1) . 33 A.5.3.3 Parameters o
15、f response PDUs . 35 A.5.4 Application I-kernel test purposes for On-Board Unit, security level 0 (AP-0BAS) . 36 A.5.4.1 Data Structures . 36 BS EN 15876-1:2016EN 15876-1:2016 (E) 3 A.5.4.2 BV test purposes . 36 A.5.4.3 BI test purposes . 39 A.5.5 Application T-kernel test purposes for On-Board Unit
16、, security level 0 (AP-0FUN) 40 A.5.5.1 General . 40 A.5.5.2 BV test purposes . 40 A.5.5.3 BI test purposes . 45 A.5.6 Application data attributes test purposes, security level 0 (AP-0DAT) 46 A.5.6.1 General . 46 A.5.6.2 Data attributes definition 46 A.5.6.3 BV test purposes . 47 A.5.6.4 BI test pur
17、poses . 59 A.5.7 Application security test purposes, security level 0 (AP-0SEC) . 62 A.5.7.1 General information 62 A.5.7.2 BV test purposes . 62 A.5.7.3 BI test purposes . 64 A.5.8 Application transaction test purposes, security level 0 (AP-0TRA) . 64 A.5.8.1 General . 64 A.5.8.2 BV test purposes .
18、 64 A.5.8.3 BI test purposes . 64 A.5.9 Application I-kernel test purposes, security level 1 (AP-1BAS) 64 A.5.9.1 General . 64 A.5.9.2 BV test purposes . 64 A.5.9.3 BI test purposes . 66 A.5.10 Application T-kernel test purposes, security level 1 (AP-1FUN). 66 A.5.10.1 General . 66 A.5.10.2 BV test
19、purposes . 66 A.5.10.3 BI test purposes 68 A.5.11 Application data attributes test purposes, security level 1 (AP-1DAT) 69 A.5.11.1 General . 69 A.5.11.2 BV test purposes . 69 A.5.11.3 BI test purposes 71 A.5.12 Application security test purposes, security level 1 (AP-1SEC) . 72 A.5.12.1 General . 7
20、2 A.5.12.2 BV test purposes . 72 A.5.12.3 BI test purposes 73 A.5.13 Application transaction test purposes, security level 1 (AP-1TRA) . 73 A.5.13.1 General . 73 BS EN 15876-1:2016EN 15876-1:2016 (E) 4 A.5.13.2 BV test purposes . 73 A.5.13.3 BI test purposes 73 Annex B (normative) Test Purposes for
21、Roadside Equipment . 74 B.1 Introduction . 74 B.2 Physical layer . 74 B.2.1 BV test purposes . 74 B.2.2 BI test purposes 76 B.3 MAC Sublayer . 76 B.3.1 BV test purposes . 76 B.3.2 BI test purposes 78 B.4 LLC Sublayer . 83 B.4.1 BV test purposes . 83 B.4.2 BI test purposes 84 B.5 Application Layer Te
22、st Purposes 85 B.5.1 Introduction and general conventions . 85 B.5.2 Application initialization phase test purposes, security level 0 (AP-0BAS) . 86 B.5.2.1 Introduction . 86 B.5.2.2 BV test purposes . 88 B.5.2.3 BI test purposes 88 B.5.3 Application GET-rq PDU test purposes, security level 0 (AP-0G
23、ET) 88 B.5.3.1 General . 88 B.5.3.2 BV test purposes . 88 B.5.3.3 BI test purposes 89 B.5.4 Application SET-rq PDU test purposes, security level 0 (AP-0SET) . 90 B.5.4.1 General . 91 B.5.4.2 BV test purposes . 91 B.5.4.3 BI test purposes 94 B.5.5 Application GET-STAMPED-rq PDU test purposes, securit
24、y level 0 (AP-0STA) . 94 B.5.5.1 General . 94 B.5.5.2 BV test purposes . 94 B.5.5.3 BI test purposes 95 B.5.6 Application SET-MMI-rq PDU test purposes, security level 0 (AP-0MMI) . 97 B.5.6.1 General . 97 B.5.6.2 BV Test Purposes 97 B.5.6.3 BI Test Purposes . 98 B.5.7 Application ECHO-rq PDU test pu
25、rposes, security level 0 (AP-0ECH) . 98 B.5.7.1 General . 98 BS EN 15876-1:2016EN 15876-1:2016 (E) 5 B.5.7.2 BV test purposes . 98 B.5.7.3 BI Test Purposes . 99 B.5.8 Application EVENT-REPORT-rq PDU test purposes, security level 0 (AP-0REL) . 99 B.5.8.1 General . 99 B.5.8.2 BV Test Purposes 99 B.5.8
26、.3 BI Test Purposes 100 B.5.9 Application initialization phase test purposes, security level 1 (AP-1BAS) . 100 B.5.9.1 General 100 Table B.4 VST8, (security level 1) - valid VST . 101 B.5.9.2 BV Test Purposes . 102 B.5.9.3 BI Test Purposes 102 B.5.10 Application GET-rq PDU test purposes, security le
27、vel 1 (AP-1GET) . 102 B.5.10.1 General 102 B.5.10.2 BV Test Purposes . 102 B.5.10.3 BI Test Purposes 103 B.5.11 Application SET-rq PDU test purposes, security level 1 (AP-1SET) 103 B.5.11.1 General 103 B.5.11.2 BV Test Purposes . 103 B.5.11.3 BI test purposes . 104 B.5.12 Application GET-STAMPED-rq
28、PDU test purposes, security level 1 (AP-1STA) 104 B.5.12.1 General 104 B.5.12.2 BV test purposes 105 B.5.12.3 BI test purposes . 105 B.5.13 Application SET-MMI-rq PDU test purposes, security level 1 (AP-1MMI) . 105 B.5.13.1 General 105 B.5.13.2 BV test purposes 105 B.5.13.3 BI test purposes . 106 B.
29、5.14 Application ECHO-rq PDU test purposes, security level 1 (AP-1ECH) 106 B.5.14.1 General 106 B.5.14.2 BV test purposes 106 B.5.14.3 BI test purposes . 106 Annex C (normative) PCTR Proforma for On-Board Units . 107 C.1 Introduction. 107 C.2 Identification summary . 107 C.2.1 Protocol conformance t
30、est report . 107 C.2.2 DUT identification . 107 C.2.3 Testing environment 108 BS EN 15876-1:2016EN 15876-1:2016 (E) 6 C.2.4 Limits and reservation . 108 C.2.5 Comments . 108 C.3 DUT Conformance status . 109 C.4 Static conformance summary 109 C.5 Dynamic conformance summary 109 C.6 Static conformance
31、 review report . 110 C.7 Test campaign report . 111 C.8 Observations 120 Annex D (normative) PCTR Proforma for Roadside Equipment 121 D.1 Introduction . 121 D.2 Identification summary . 121 D.2.1 Protocol conformance test report 121 D.2.2 DUT identification 121 D.2.3 Testing environment 122 D.2.4 Li
32、mits and reservation . 122 D.2.5 Comments . 122 D.3 DUT Conformance status . 123 D.4 Static conformance summary 123 D.5 Dynamic conformance summary 123 D.6 Static conformance review report . 124 D.7 Test campaign report . 125 D.8 Observations 129 Bibliography . 130 BS EN 15876-1:2016EN 15876-1:2016
33、(E) 7 European foreword This document (EN 15876-1:2016) has been prepared by Technical Committee CEN/TC 278 “Intelligent transport systems”, the secretariat of which is held by NEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or
34、 by endorsement, at the latest by April 2017, and conflicting national standards shall be withdrawn at the latest by April 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for
35、identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. This document supersedes EN 15876-1:2010+A1:2012. This second edition of EN 15876-1 incorporates the following main modification
36、s compared to the previous one: amendment of terms, in order to reflect harmonization of terms across electronic fee collection (EFC) standards; addition of a new clause (i.e. Clause 5) on conformance; amendments to reflect changes to the underlying base standard, with emphasis on backward compatibi
37、lity with the first edition of this standard. For the revision of this European Standard, the following principles have been used: take into account the evolution of some of the underlying standard, i.e. EN 15509:2014 maintain compatibility with the previous edition of this European Standard. Accord
38、ing to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
39、Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 15876-1:2016EN 15876-1:2016 (E) 8 Introduction CEN/TC 278 has produced a set of standar
40、ds that support interoperable DSRC-EFC-systems e.g. EN ISO 14906 (a “toolbox“ for defining EFC-application transaction) and CEN ISO/TS 14907-2 (EFC application interface conformance tests for On Board Units). However, these standards are only of an enabling nature and do not guarantee unambiguous te
41、chnical interoperability. Therefore EN 15509, Electronic fee collection Interoperability application profile for DSRC was developed to support technical interoperability between EFC-systems. This European Standard defines the test suite structure and the test purposes for conformity evaluation of OB
42、Us and RSE designed for compliance with the requirements set up in EN 15509. A test standard for evaluation of conformity of on-board and roadside equipment is a necessary element for coherent, practical and effective appraisal of products compliance to EN 15509. This document forms Part 1 of a two-
43、part standard: EN 15876-1, Electronic fee collection Evaluation of on-board and roadside equipment for conformity to EN 15509 Part 1: Test suite structure and test purposes EN 15876-2, Electronic fee collection Evaluation of on-board and roadside equipment for conformity to EN 15509 Part 2: Abstract
44、 test suites Together, the two parts of EN 15876 provide the necessary foundation for implementation of the interoperability requirements as stated in EN 15509: industry is provided with an easy-to-use toolbox for product assessment; operators can easily assess conformity to EN 15509 and reference t
45、o the standard in tendering processes; authorities and joint undertakings may reference to the test standard when stating interoperability requirements; certification organisations are given an effective tool for certification of products. BS EN 15876-1:2016EN 15876-1:2016 (E) 9 1 Scope The objectiv
46、e of this document is to provide a basis for conformance tests for DSRC equipment (on-board and roadside units) to support interoperability between different equipment supplied by different manufacturers. 2 Normative references The following documents, in whole or in part, are normatively referenced
47、 in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 15509:2014, Electronic fee collection Interoperability application profile f
48、or DSRC EN ISO 3166-1, Codes for the representation of names of countries and their subdivisions Part 1: Country codes (ISO 3166-1) EN ISO 14816, Road transport and traffic telematics Automatic vehicle and equipment identification Numbering and data structure (ISO 14816) EN ISO 14906:2011, Electroni
49、c fee collection Application interface definition for dedicated short-range communication (ISO 14906:2011) CEN ISO/TS 14907-2, Electronic fee collection Test procedures for user and fixed equipment Part 2: Conformance test for the on-board unit application interface (ISO/TS 14907-2) ETSI EN 300 674-1:2004, Electromagnetic compatibility and Radio spectrum Matters (ERM); Road Transport and Traffic Telematics (RTTT); Dedicated Short Range Communication (DSRC) transmission equipment (500 kbit/s / 250 kbit/s) operating
