1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 15889:2011Fire-fighting hoses T e s t m e t h o d sBS EN 15889:2011 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 15889:2011. The UK
2、 participation in its preparation was entrusted to T e c h n i c a l Committee FSH/17/8, Hydrants, hoses and associated water delivery equipment.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the nece
3、ssary provisions of a contract. Users are responsible for its correct application. BSI 2011 ISBN 978 0 580 63859 6 ICS 13.220.10; 23.040.70 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy
4、 and Strategy Committee on 31 July 2011.Amendments issued since publicationDate T e x t a f f e c t e dBS EN 15889:2011EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15889 July 2011 ICS 13.220.10; 23.040.70 English Version Fire-fighting hoses - Test methods Tuyaux de lutte contre lincendie - M
5、thodes dessai Feuerlschschluche - Prfverfahren This European Standard was approved by CEN on 4 June 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteratio
6、n. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by
7、translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, F
8、inland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHE
9、S KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15889:2011: EBS EN 15889:2011EN 15889:2011 (E) 2 Contents Page Foreword 41 Scope 52 Normative references
10、 53 Terms and definitions .54 Test methods 6Annex A (normative) Test for measurement of hose cover thickness (lay-flat fire-fighting hoses) 7A.1 Test piece .7A.2 Apparatus .7A.3 Procedure .7A.4 Test report 7Annex B (normative) Adhesion test (lay-flat fire-fighting hoses) 8B.1 Test piece .8B.2 Appara
11、tus .8B.3 Procedure .8B.4 Test report 9Annex C (normative) Kink pressure test (lay-flat and semi-rigid fire-fighting hoses) 10C.1 Test piece 10C.2 Apparatus 10C.3 Procedure 10C.4 Test report . 10Annex D (normative) Accelerated ageing test 11D.1 Lay-flat fire-fighting hoses . 11D.2 Semi-rigid hoses .
12、 12Annex E (normative) Surface abrasion resistance test (semi-rigid fire-fighting hoses) 13E.1 Test pieces 13E.2 Apparatus 13E.3 Procedure 14E.4 Test report . 15Annex F (normative) Point abrasion resistance test (semi-rigid fire-fighting hoses) . 16F.1 Test pieces 16F.2 Apparatus 16F.3 Procedure 17F
13、.4 Test report . 18Annex G (normative) Low temperature flexibility test (lay-flat fire-fighting hoses and semi-rigid fire-fighting hoses) . 19G.1 Lay-flat fire-fighting hoses . 19G.2 Semi-rigid fire-fighting hoses 23Annex H (normative) Hot surface resistance test (semi-rigid and lay-flat fire-fighti
14、ng hoses) 24H.1 Test piece 24H.2 Apparatus 24H.3 Procedure 27H.4 Test report . 28Annex I (normative) Pressure loss test (semi-rigid fire-fighting hoses) 29I.1 Test piece 29I.2 Apparatus 29BS EN 15889:2011EN 15889:2011 (E) 3 I.3 Procedure . 30I.4 Test report 31Annex J (normative) Deformation under cr
15、ushing test (semi-rigid fire-fighting hoses) . 32J.1 Test piece . 32J.2 Apparatus . 32J.3 Procedure . 32J.4 Test report 33Annex K (normative) Bending and crush resistance test (semi-rigid fire-fighting hoses) . 34K.1 Test piece . 34K.2 Apparatus . 34K.3 Procedure . 34K.4 Test report 35Annex L (norma
16、tive) Test for fire-fighting hose assemblies 36L.1 Test piece . 36L.2 Apparatus . 36L.3 Procedure . 36L.4 Test report 36Annex M (normative) Pressure impulse test (fire-fighting suction hoses) . 37M.1 Test pieces . 37M.2 Apparatus . 37M.3 Test fluid . 37M.4 Conditioning 37M.5 Procedure . 37M.6 Test r
17、eport 37Annex N (normative) Reinforcement fracture resistance test (type B hoses only) (fire-fighting suction hoses) . 40N.1 Test pieces . 40N.2 Apparatus . 40N.3 Conditioning 40N.4 Procedure . 40N.5 Test report 42Annex O (normative) Test for flexibility at ambient temperature (fire-fighting suction
18、 hoses) 43O.1 Test piece . 43O.2 Apparatus . 43O.3 Procedure . 43O.4 Test report 43Annex P (normative) Test for vacuum resistance with flexing (fire-fighting suction hoses) . 45P.1 Test piece . 45P.2 Apparatus . 45P.3 Procedure . 45P.4 Test report 45Annex Q (normative) Test for resistance to kinking
19、 (lay-flat fire-fighting hoses) 46Q.1 Test piece . 46Q.2 Apparatus . 46Q.3 Procedure . 47Q.4 Test report 47Annex R (informative) Test methods from other EN and ISO standards 48Bibliography 49BS EN 15889:2011EN 15889:2011 (E) 4 Foreword This document (EN 15889:2011) has been prepared by Technical Com
20、mittee CEN/TC 192 “Fire service equipment”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2012, and conflicting national standards shall be withd
21、rawn at the latest by January 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This European Standard details hose and hose assem
22、bly test methods collated mainly from published EN fire hose standards. Although no technical changes have been introduced, some changes to the format of the test methods had to be made to enable them to be included in this European Standard. The published EN fire-fighting hose standards will be rev
23、ised to remove the test method annexes following the publication of this European Standard. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, C
24、zech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 15889:2011EN 15889:2011 (E) 5 1 Scop
25、e This European standard specifies test methods for lay-flat fire-fighting hoses for fixed systems, semi-rigid fire-fighting hoses for both fixed systems and vehicles and fire-fighting suction hoses for vehicles. These test methods are required for the standards for fire-fighting hose product standa
26、rds developed by CEN/TC 192. Consequently, the applicable test methods are selected and the requirements and test values defined in the relevant fire-fighting hose product standards and normatively referenced in those standards. This European Standard does not cover test methods for lay-flat fire-fi
27、ghting hoses for vehicles for which no European standard exists. NOTE Annex R (informative) lists the existing published ISO and EN hose test methods standards that are specified within fire-fighting hose standards. 2 Normative references The following referenced documents are indispensable for the
28、application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN ISO 4671, Rubber and plastics hose and hose assemblies Methods of measurement of the dimensions of hoses an
29、d the lengths of hose assemblies (ISO 4671:2007) EN ISO 4672:1999, Rubber and plastics hoses Sub-ambient temperature flexibility tests (ISO 4672:1997) EN ISO 8033:2006, Rubber and plastics hose Determination of adhesion between components (ISO 8033:2006) EN ISO 8330:2008, Rubber and plastics hoses a
30、nd hose assemblies Vocabulary (ISO 8330:2007) ISO 188:2007, Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests ISO 23529, Rubber General procedures for preparing and conditioning test pieces for physical test methods 3 Terms and definitions For the purposes of this do
31、cument, the following terms and definitions apply, together with those for working pressure, proof pressure and burst pressure as given in EN ISO 8330:2008. 3.1 lay-flat fire-fighting hose hose with a soft wall which, when unpressurized internally, collapses to such an extent that the inner faces of
32、 the hose make contact and the hose takes up a flat cross-sectional appearance 3.2 hose coating thin coating usually applied as a lacquer, which acts as a sealant through which the jacket fibres are likely to protrude through the coating 3.3 hose cover cover which completely surrounds the jacket for
33、ming a separate component BS EN 15889:2011EN 15889:2011 (E) 6 3.4 jacket circular woven seamless reinforcement 3.5 semi-rigid hose hose which maintains its round cross-section even when unpressurized 3.6 suction hose hard wall hose which is designed to resist external pressure 4 Test methods The fol
34、lowing fire hose test methods are detailed in the annexes: Annex A Test for measurement of hose cover thickness (lay-flat fire-fighting hoses) Annex B Adhesion test (lay-flat fire-fighting hoses) Annex C Kink pressure test (lay-flat and semi-rigid fire-fighting hoses) Annex D Accelerated ageing test
35、 Annex E Surface abrasion resistance test (semi-rigid fire-fighting hoses) Annex F Point abrasion resistance test (semi-rigid fire-fighting hoses) Annex G Low temperature flexibility test (lay-flat fire-fighting hoses and semi-rigid fire-fighting hoses) Annex H Hot surface resistance test (semi- rig
36、id and lay-flat fire-fighting hoses) Annex I Pressure loss test (semi-rigid fire-fighting hoses) Annex J Deformation under crushing test (semi-rigid fire-fighting hoses) Annex K Bending and crush resistance test (semi-rigid fire-fighting hoses) Annex L Test for fire-fighting hose assemblies Annex M
37、Pressure impulse test (fire-fighting suction hoses) Annex N Reinforcement fracture resistance test (type B hoses only) (fire-fighting suction hoses) Annex O Test for flexibility at ambient temperature (fire-fighting suction hoses) Annex P Test for vacuum resistance with flexing (fire-fighting suctio
38、n hoses) Annex Q Test for resistance to kinking (lay-flat fire-fighting hoses) Annex R Test methods from other EN and ISO standards NOTE The requirements for test methods are stated in the product fire hose standards. BS EN 15889:2011EN 15889:2011 (E) 7 Annex A (normative) Test for measurement of ho
39、se cover thickness (lay-flat fire-fighting hoses) A.1 Test piece Cut a ring sample from the hose and measure the distance between the top of the yarns and the surface of the cover at four equidistant points around the ring using the optical magnifier. A.2 Apparatus A.2.1 Optical magnifier, with a sc
40、ale graduated in 0,01 mm divisions. A.3 Procedure Calculate the mean of the four measurements to obtain the cover thickness value. Where the cover is variable or ribbed, the measurements shall be made at the thinnest point. A.4 Test report The test report shall include the following information: ful
41、l description of the hose tested; reference to this test method; cover thickness; date of the test. BS EN 15889:2011EN 15889:2011 (E) 8 Annex B (normative) Adhesion test (lay-flat fire-fighting hoses) B.1 Test piece Cut a ring (50 2) mm wide from the hose at right angles to its longitudinal axis. Cu
42、t the ring transversely and open it to form a strip. Make two parallel cuts at right angle to the hose axis (25 0,5) mm apart, taking care not to cut through the yarns. Separate a layer for a distance sufficient to enable the separated end to be held in the grips of the test machine (see Figure B.1)
43、. Dimensions in millimetres Figure B.1 Test piece adhesion test B.2 Apparatus B.2.1 A tensile testing machine capable of carrying out the procedure in B.3. B.3 Procedure When tested in accordance with type 1 of EN ISO 8033:2006 the adhesion between lining and jacket shall be as specified in the rele
44、vant fire hose standard. If an adhesion result is not possible because of tearing due to high adhesion, this shall be accepted as a pass. All adhesions shall be attempted and the results recorded. BS EN 15889:2011EN 15889:2011 (E) 9 B.4 Test report The test report shall include the following informa
45、tion: full description of the hose tested; reference to this test method; adhesion value and any evidence of tearing; date of the test. BS EN 15889:2011EN 15889:2011 (E) 10 Annex C (normative) Kink pressure test (lay-flat and semi-rigid fire-fighting hoses) C.1 Test piece Cut a test piece of 2,0 m l
46、ength from the hose. C.2 Apparatus C.2.1 Source of hydrostatic pressure, with water as the test medium, capable of maintaining the specified pressure. C.3 Procedure Connect the test piece to the pressure source and fill with water, expelling all air before securely clamping shut the free end of the
47、hose. Maintain a pressure of 0,07 MPa in the test piece while bending it through 180 at a point approximately midway along its length. Tie the free end of the hose back on itself, as close as possible to the secure end, so as to form a sharp kink, ensuring that the tie does not prevent subsequent ex
48、pansion of the diameter of the test piece. Raise the pressure in the test piece to the specified pressure over a period of 60 s. Maintain the pressure for 60 s. Examine the test piece for any sign of leakage or damage prior to releasing the pressure. C.4 Test report The test report shall include the following information: full description of the hose tested; reference to this test method; any evidence of leakage or damage observed; date of the test. BS EN 15889:2011EN 15889
