1、BSI Standards PublicationBS EN 16228-2:2014Drilling and foundation equipment SafetyPart 2: Mobile drill rigs for civil and geo-technical engineering, quarrying and miningBS EN 16228-2:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 16228-2:2014.It supersede
2、s BS EN 791:1995+A1:2009 and BS EN 996:1995 + A3:2009 which are withdrawnThe UK participation in its preparation was entrusted to Technical Committee B/513, Construction equipment and plant and site safety.A list of organizations represented on this committee can be obtained on request to its secret
3、ary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2014.Published by BSI Standards Limited 2014ISBN 978 0 580 73265 2ICS 91.220; 93.020Compliance with a British Standard can
4、not confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2014.Amendments/corrigenda issued since publicationDate Text affectedBS EN 16228-2:2014 BRITISH STANDARDNational forewordThis British Standard i
5、s the UK implementation of EN 16228-2:2014.It supersedes BS EN 791:1995+A1:2009 and BS EN 996:1995 + A3:2009 which are withdrawnThe UK participation in its preparation was entrusted to Technical Committee B/513, Construction equipment and plant and site safety.A list of organizations represented on
6、this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2014.Published by BSI Standards Limited 2014ISBN 978 0 580 73265 2I
7、CS 91.220; 93.020Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2014.Amendments/corrigenda issued since publicationDate Text affectedTogether with BS EN
8、16228-1:2014, BS EN 16228-3:2014, BS EN 16228-4:2014, BS EN 16228-5:2014, BS EN 16228-6:2014 and BS EN 16228-7:2014, it supersedes BS EN 791:1995+A1:2009 and BS EN 996:1995+A3:2009, which are withdrawn. This British Standard was published under the authority of the Standards Policy and Strategy Comm
9、ittee on 31 August 2014.BS EN 16228-2:2014EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16228-2 May 2014 ICS 93.020 Supersedes EN 791:1995+A1:2009, EN 996:1995+A3:2009English Version Drilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil and geotechnical engineering,
10、 quarrying and miningMachines de forage et de fondation - Scurit - Partie 2: Machines mobiles de forage de gnie civil, de gotechnique, de forage deau, dexploration de sol, dnergie gothermique, de mines et carrires Gerte fr Bohr- und Grndungsarbeiten - Sicherheit - Teil 2: Mobile Bohrgerte fr Tiefbau
11、, Geotechnik und Gewinnung This European Standard was approved by CEN on 6 March 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists
12、 and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under t
13、he responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugo
14、slav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN
15、 DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16228-2:2014 EBS EN 16228-2:2014EN 16228-2:2014 (E) 2 Contents P
16、age Foreword 4 Introduction .5 1 Scope 6 2 Normative references 6 3 Terms and definitions .7 4 List of additional significant hazards 8 5 Safety requirements and/or protective measures 9 5.1 General 9 5.2 Boom mounted working platforms for underground use .9 5.3 Requirements for strength and stabili
17、ty 10 5.3.1 Stability calculation - Tipping angle . 10 5.3.2 Operating conditions 10 5.4 Fire protection . 11 5.5 Guards . 11 5.6 Protection against moving parts on specific machine types . 12 5.6.1 General . 12 5.6.2 Underground pre-armouring machine 12 5.6.3 Drill jumbo . 12 5.7 Rod/auger guide 13
18、 5.8 Winches, draw-works and ropes for movement on slopes 13 5.9 Operating position(s) . 14 5.10 Brakes of the carrier machine . 14 5.10.1 General . 14 5.10.2 General requirements for wheel mounted mobile drill rigs . 15 5.10.3 Service braking system for wheel mounted mobile drill rigs 15 5.10.4 Sec
19、ondary braking system for wheel mounted mobile drill rigs . 15 5.10.5 Parking braking system for rubber-tyred rigs . 15 5.10.6 Verification of brakes . 16 5.10.7 Braking systems for skid steer wheel mounted drill rigs . 16 6 Verification of the safety requirements and/or protective measures 16 6.1 G
20、eneral . 16 6.2 Functional test 18 7 Information for use . 18 7.1 General . 18 7.2 Drill rigs for underground operation. 18 Annex A (normative) Noise test code 20 A.1 General . 20 A.2 Non-Percussive mobile drill rigs (Rotary Drilling) 20 A.3 Percussive mobile drill rigs (Percussive and Rotary-percus
21、sive) 20 A.4 Information to be recorded and reported . 20 Annex B (normative) Brake test for mobile drill rigs excluding truck and tractor mounted drill rigs 21 B.1 Test conditions . 21 B.2 Performance of the tests 21 BS EN 16228-2:2014EN 16228-2:2014 (E) 2 Contents Page Foreword 4 Introduction .5 1
22、 Scope 6 2 Normative references 6 3 Terms and definitions .7 4 List of additional significant hazards 8 5 Safety requirements and/or protective measures 9 5.1 General 9 5.2 Boom mounted working platforms for underground use .9 5.3 Requirements for strength and stability 10 5.3.1 Stability calculatio
23、n - Tipping angle . 10 5.3.2 Operating conditions 10 5.4 Fire protection . 11 5.5 Guards . 11 5.6 Protection against moving parts on specific machine types . 12 5.6.1 General . 12 5.6.2 Underground pre-armouring machine 12 5.6.3 Drill jumbo . 12 5.7 Rod/auger guide 13 5.8 Winches, draw-works and rop
24、es for movement on slopes 13 5.9 Operating position(s) . 14 5.10 Brakes of the carrier machine . 14 5.10.1 General . 14 5.10.2 General requirements for wheel mounted mobile drill rigs . 15 5.10.3 Service braking system for wheel mounted mobile drill rigs 15 5.10.4 Secondary braking system for wheel
25、mounted mobile drill rigs . 15 5.10.5 Parking braking system for rubber-tyred rigs . 15 5.10.6 Verification of brakes . 16 5.10.7 Braking systems for skid steer wheel mounted drill rigs . 16 6 Verification of the safety requirements and/or protective measures 16 6.1 General . 16 6.2 Functional test
26、18 7 Information for use . 18 7.1 General . 18 7.2 Drill rigs for underground operation. 18 Annex A (normative) Noise test code 20 A.1 General . 20 A.2 Non-Percussive mobile drill rigs (Rotary Drilling) 20 A.3 Percussive mobile drill rigs (Percussive and Rotary-percussive) 20 A.4 Information to be r
27、ecorded and reported . 20 Annex B (normative) Brake test for mobile drill rigs excluding truck and tractor mounted drill rigs 21 B.1 Test conditions . 21 B.2 Performance of the tests 21 BS EN 16228-2:2014EN 16228-2:2014 (E) 3 B.3 Dynamic tests for wheel mounted mobile drill rigs . 22 B.4 Service bra
28、ke test 22 B.5 Heat fade test . 22 B.6 Secondary brake test 22 B.7 Parking brake test . 22 B.8 Test report 23 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC 24 Bibliography 25 BS EN 16228-2:2014EN 16228-2:2014 (E) 4 Forewo
29、rd This document (EN 16228-2:2014) has been prepared by Technical Committee CEN/TC 151 “Construction equipment and building material machines - Safety”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an ident
30、ical text or by endorsement, at the latest by November 2014 and conflicting national standards shall be withdrawn at the latest by November 2014. This document supersedes EN 791:1995+A1:2009 and EN 996:1995+A3:2009. This document has been prepared under a mandate given to CEN by the European Commiss
31、ion and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This European Standard is divided into several parts and covers drilling and foundation eq
32、uipment. Part 1 contains requirements that are/may be common to all drilling and foundation equipment. Other parts contain additional requirements for specific machines that supplement or modify the requirements of part 1. Compliance with the clauses of part 1 together with those of a relevant speci
33、fic part of this standard giving requirements for a particular machine provides one means of conforming with the essential health and safety requirements of the Directive concerned. When a relevant specific part does not exist, part 1 can help to establish the requirements for the machine, but will
34、not by itself provide a means of conforming to the relevant essential health and safety requirements of the Directive. This European Standard, EN 16228, Drillling and foundation equipment Safety, consists of the following parts: Part 1: Common requirements Part 2: Mobile drill rigs for civil and geo
35、technical engineering, quarrying and mining Part 3: Horizontal directional drilling equipment (HDD) Part 4: Foundation equipment Part 5: Diaphragm walling equipment Part 6: Jetting, grouting and injection equipment Part 7: Interchangeable auxiliary equipment According to the CEN-CENELEC Internal Reg
36、ulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland,
37、Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 16228-2:2014EN 16228-2:2014 (E) 4 Foreword This document (EN 16228-2:2014) has been prepared by Technical Committee CEN/TC
38、 151 “Construction equipment and building material machines - Safety”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2014 and conflicting nation
39、al standards shall be withdrawn at the latest by November 2014. This document supersedes EN 791:1995+A1:2009 and EN 996:1995+A3:2009. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements o
40、f EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This European Standard is divided into several parts and covers drilling and foundation equipment. Part 1 contains requirements that are/may be common to all drilling and f
41、oundation equipment. Other parts contain additional requirements for specific machines that supplement or modify the requirements of part 1. Compliance with the clauses of part 1 together with those of a relevant specific part of this standard giving requirements for a particular machine provides on
42、e means of conforming with the essential health and safety requirements of the Directive concerned. When a relevant specific part does not exist, part 1 can help to establish the requirements for the machine, but will not by itself provide a means of conforming to the relevant essential health and s
43、afety requirements of the Directive. This European Standard, EN 16228, Drillling and foundation equipment Safety, consists of the following parts: Part 1: Common requirements Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining Part 3: Horizontal directional drillin
44、g equipment (HDD) Part 4: Foundation equipment Part 5: Diaphragm walling equipment Part 6: Jetting, grouting and injection equipment Part 7: Interchangeable auxiliary equipment According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are boun
45、d to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal
46、, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 16228-2:2014EN 16228-2:2014 (E) 5 Introduction This document is a type C standard as stated in EN ISO 12100. The machinery concerned and the extent to which hazards, hazardous situation and events are cov
47、ered are indicated in the scope of this document. When provisions of this type C standard are different from those, which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of the other standards, for machines that have been designed and b
48、uilt according to the provisions of this type C standard. BS EN 16228-2:2014EN 16228-2:2014 (E) 6 1 Scope This European Standard, together with part 1, deals with all significant hazards for mobile drill rigs for civil and geotechnical engineering, quarrying and mining when they are used as intended
49、 and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4). The requirements of this part are complementary to the common requirements formulated in EN 16228-1:2014. This document does not repeat the requirements from EN 16228-1, but adds or replaces the requirements for application for mobile drill rigs. In this document the general term “mobile drill rig” covers several different types of machines for use in: civil engineering; geotech
