1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS EN 45510-4-3:1999 The
2、European Standard EN 45510-4-3:1999 has the status of a British Standard ICS 27.060.30; 27.100 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Guide for procurement of power station equipment Part 4: Boiler auxiliaries Section 3: Draught plantThis British Standard, having been
3、 prepared under the direction of the Engineering Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 September 1999 BSI 09-1999 ISBN 0 580 32506 7 BS EN 45510-4-3:1999 Amendments issued since publication Amd. No. Date Comments National foreword
4、This British Standard is the English language version of EN 45510-4-3:1999. The UK participation in its preparation was entrusted to Technical Committee E/-/20, Power engineering steering committee, which has the responsibility to: aid enquirers to understand the text; present to the responsible Eur
5、opean committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary.
6、Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Elect
7、ronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This do
8、cument comprises a front cover, an inside front cover, the EN title page, pages 2 to 16, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued.CEN CENELEC CEN Central Secretariat: rue de Stassart 36, B-1050 Brussels CEN
9、ELEC Central Secretariat: rue de Stassart 35, B-1050 Brussels 1999 CEN/CENELEC All rights of exploitation in any form and by any means reserved worldwide for CEN national Members and for CENELEC Members. Ref. No. EN 45510-4-3:1999 E EUROPEAN STANDARD EN 45510-4-3 NORME EUROPE ENNE EUROPA ISCHE NORM
10、April 1999 ICS 23.120; 27.040; 27.100 English version Guide for procurement of power station equipment Part 4: Boiler auxiliaries Section 3: Draught plant Guide pour lacquisition dequipements destine s aux centrales de production de lectricite Partie 4: Auxiliaires de chaudie re Section 3: Syste me
11、de ventilation Leitfaden fu r die Beschaffung von Ausru stungen fu r Kraftwerke Teil 4: Nebenanlagen Hauptabschnitt 3: Ventilatoranlage This European Standard was approved by CEN/CENELEC on 1 April 1999. CEN/CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulat
12、e the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN/CENELEC member. This European Standa
13、rd exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN/CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN/CENELEC members are the
14、 national standards bodies and national electrotechnical committees, respectively, of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.Page 2 EN 45510-4-3:199
15、9 BSI 09-1999 Foreword This European Standard has been prepared by Technical Committee CEN/CLC JTFPE, Joint task force power engineering, the Secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by
16、 endorsement, at the latest by October 1999, and conflicting national standards shall be withdrawn at the latest by October 1999. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria,
17、 Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. This standard takes the form of a recommendation and is therefore entitled a guide. This guide for procurement i
18、s a part of a series of guides mandated to cover the procurement of power station plant and equipment in conformity with European Procurement Directives. The guides are: EN 45510, Guide for procurement of power station equipment Part 1: Common Clauses Part 2-1: Electrical equipment Power transformer
19、s Part 2-2: Electrical equipment Uninterruptible power supplies Part 2-3: Electrical equipment Stationary batteries and chargers Part 2-4: Electrical equipment High power static converters Part 2-5: Electrical equipment Motors Part 2-6: Electrical equipment Generators Part 2-7: Electrical equipment
20、Switchgear and control gear Part 2-8: Electrical equipment Power cables Part 2-9: Electrical equipment Cabling systems Part 3-1: Boilers Water tube boilers Part 3-2: Boilers Shell boilers Part 3-3: Boilers Boilers with fluidized bed firing Part 4-1: Boiler auxiliaries Equipment for reduction of dust
21、 emissions Part 4-2: Boiler auxiliaries Gas-air, steam-air and gas-gas heaters Part 4-3: Boiler auxiliaries Draught plant Part 4-4: Boiler auxiliaries Fuel preparation equipment Part 4-5: Boiler auxiliaries Coal handling and bulk storage plant Part 4-6: Boiler auxiliaries Flue gas desulfurization (D
22、e-S0 x ) plant Part 4-7: Boiler auxiliaries Ash handling plant Part 4-8: Boiler auxiliaries Dust handling plant Part 4-9: Boiler auxiliaries Sootblowers Part 4-10: Boiler auxiliaries Flue gas denitrification (De-N0 x ) plant Part 5-1: Turbines Steam turbines Part 5-2: Turbines Gas turbines Part 5-3:
23、 Turbines Wind turbines Part 5-4: Turbines Hydraulic turbines, storage pumps and pump-turbines Part 6-1: Turbine auxiliaries Deaerators Part 6-2: Turbine auxiliaries Feedwater heaters Part 6-3: Turbine auxiliaries Condenser plant Part 6-4: Turbine auxiliaries Pumps Part 6-5: Turbine auxiliaries Dry
24、cooling systems Part 6-6: Turbine auxiliaries Wet and wet/dry cooling towers Part 6-7: Turbine auxiliaries Moisture separator reheaters Part 6-8: Turbine auxiliaries Cranes Part 6-9: Turbine auxiliaries Cooling water systems Part 7-1: Pipework and valves Hiqh pressure piping systems Part 7-2: Pipewo
25、rk and valves Boiler and high pressure piping valves Part 8-1: Control and instrumentation EN 45510-1 contains those clauses common to all the above guides qiving the provisions of a non-equipment specific nature for use in the procurement of power station plant. EN 45510 is the responsibility of JT
26、FPE The so called “common clauses”, as appropriate, also appear in italics in the documents specific to particular equipment. In this guide, words in bold type indicate that they have the meaning given in the definitions, clause 3. In this guide, words and sentences not in italics are specific to th
27、is guide and refer to the particular equipment covered.Page 3 EN 45510-4-3:1999 BSI 09-1999 Contents Page Foreword 2 1 Scope 4 2 Normative references 4 3 Definitions 4 3.1 Organizational terms 4 3.2 Technical terms 5 3.3 General terms 5 4 Brief overall project description 6 4.1 Role and organization
28、 of purchaser 6 4.2 Site location 6 4.3 Equipment task 6 4.4 Equipment to be purchased 6 4.5 Control and instrumentation 7 4.6 Electrical supplies and other services 7 4.7 Other interfaces 7 4.8 Project programme 7 4.9 Equipment identification systems 7 5 Extent of supply 7 6 Terminal points 8 7 Ope
29、rational requirements 8 7.1 Operating environment 8 7.2 Manning levels 8 7.3 Normal operation 8 7.4 Operating hours 8 7.5 Start-up and shut-down 8 7.6 Abnormal conditions 8 7.7 Further operational requirements 9 8 Life expectancy 9 8.1 Design life 9 8.2 Components requiring periodic maintenance 9 9
30、Performance requirements 9 9.1 Duty 9 9.2 Performance 9 9.3 Equipment margins 9 9.4 Availability 10 9.5 Levels of component redundancy 10 9.6 Further performance requirements 10 10 Design and fabrication 11 10.1 Specific equipment features 11 10.2 Design justification 12 10.3 Material selection 12 P
31、age 10.4 Safety 12 10.5 Interchangeability 12 10.6 Fabrication methods 12 11 Maintenance requirements 12 11.1 Planned maintenance 12 11.2 Personnel safety 12 11.3 Requirements for access 12 11.4 Lifting requirements 12 11.5 Special tools 13 11.6 Test equipment 13 11.7 Spare parts strategy 13 11.8 Sp
32、ecial precautions 13 12 Technical documentation requirements 13 12.1 Tender documentation 13 12.2 Contract documentation 13 13 Applicable legislation, regulations, standards and further requirements 13 13.1 Legislation and regulations 13 13.2 Standards 13 13.3 Further requirements 13 14 Evaluation c
33、riteria 14 14.1 General 14 14.2 Technical criteria 14 15 Quality measures 14 15.1 General 14 15.2 Approvals procedure 14 15.3 Inspection requirements 14 15.4 Non-conformity 14 16 Site factors 14 16.1 Access 14 16.2 Facilities 14 16.3 Site specific requirements 15 17 Verification of specified perform
34、ance 15 17.1 General 15 17.2 Works tests 15 17.3 Test during installation and commissioning 15 17.4 Technical conditions for trial run 15 17.5 Functional and performance tests 16 Annex A (informative) Bibliography 16Page 4 EN 45510-4-3:1999 BSI 09-1999 1 Scope This standard gives guidance on writing
35、 the technical specification for the procurement of fans, ducts and dampers associated with steam generating plant and flue gas treatment plant for use in electricity generating stations (power stations). This guide for procurement is not applicable to equipment for use in the nuclear reactor plant
36、area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this guide. This guide covers: primary air fans and exhauster fans; secondary air fans, forced draught fans and induced draught fans; flue gas recirculating fans and flue gas
37、booster fans; modulating dampers and shut-off dampers; diverters and guide vanes; lined and unlined flues and ducts; thermal/acoustic insulation and cladding. The equipment covered by this guide is defined by its function rather than design type. Therefore, the guidance to the specification is state
38、d in performance terms rather than being specified by a detailed description of the equipment to be supplied. This guide indicates to potential purchasers how their specification should be prepared so that: the equipment type and capacity interfaces correctly with other elements of the systems; pred
39、icted performance is achieved; ancillary equipment is properly sized; reliability, availability and safety requirements are achieved; proper consideration is given to the evaluation process and the quality measures to be applied. This guide does not determine the type of specification (e.g. detailed
40、, performance, functional) or the extent of supply for any given contract which is normally decided on the basis of the purchasers project strategy. It does not cover: any commercial, contractual or legal issues which are normally in separate parts of an enquiry; any allocation of responsibilities w
41、hich are determined by the contract. This guide does not prescribe the arrangement of the documents in the enquiry. NOTE As a comprehensive European environmental policy is still in preparation, this guide does not address the environmental implications of the equipment. 2 Normative references This
42、guide for procurement incorporates by dated or undated reference, provisions from other publications. These normative references are cited in the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publ
43、ications apply to this guide only when incorporated in it by amendment or revision. For undated references, the latest edition of the publication referred to applies. EN ISO 9001, Quality systems Model for quality assurance in design, development, production, installation and servicing (ISO 9001:199
44、4). EN ISO 9002, Quality systems Model for quality assurance in production, installation and servicing (ISO 9002:1994). IEC 60050 (191), International electrotechnical vocabulary. 3 Definitions For the purposes of this guide, the following definitions apply. 3.1 Organizational terms 3.1.1 purchaser
45、recipient of a product and/or a service provided by a supplier 3.1.2 supplier person or organization that provides a product and/or a service to the purchaser 3.1.3 specification document stating technical requirements of the purchaser. It may form part of an enquiry issued by a purchaser 3.1.4 enqu
46、iry invitation to tender issued by a purchaser. It will normally include a specification together with the necessary contractual and commercial conditions 3.1.5 tender offer made by a tenderer in response to an enquiry 3.1.6 tenderer person or organization submitting a tender for the equipment in re
47、sponse to the enquiryPage 5 EN 45510-4-3:1999 BSI 09-1999 3.1.7 site place to which the equipment is to be delivered or where work is to be done by the supplier, together with so much of the area surrounding as the supplier may, with the consent of the purchaser, use for the purposes of the contract
48、 NOTE Further definitions of useful organizational terms may be found in EN ISO 8402 (see annex A). 3.2 Technical terms 3.2.1 draught plant a combination of equipment comprising fans, ducts, dampers etc. which together form a system for transferring and controlling gas and air 3.2.2 primary air fans
49、 fans supplying the air required to transport pulverized coal from the coal mills to the boiler furnace. The fan draws air from either within or outside the boiler house (cold primary air fans) or from downstream of the airheaters (hot primary air fans) 3.2.3 forced draught fans fans supplying all or a large proportion of the combustion air to a steam generating plant. The fan draws its air from either within or outside the boiler h
