1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS EN 45510-4-6:1999 The
2、European Standard EN 45510-4-6:1999 has the status of a British Standard ICS 27.060.30 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Guide for procurement of power station equipment Part 4: Boiler auxiliaries Section 6: Flue gas desulfurization (De-SO x ) plantThis British S
3、tandard, having been prepared under the direction of the Engineering Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 September 1999 BSI 09-1999 ISBN 0 580 32491 5 BS EN 45510-4-6:1999 Amendments issued since publication Amd. No. Date Comment
4、s National foreword This British Standard is the English language version of EN 45510-4-6:1999. The UK participation in its preparation was entrusted to Technical Committee E/-/20, Power engineering steering committee, which has the responsibility to: aid enquirers to understand the text; present to
5、 the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on reques
6、t to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the
7、 BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summ
8、ary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 16, an inside back cover and a back cover. The BSI copyright notice displayed throughout this document indicates when the document was last issued.CEN CENELEC CEN Central Secretariat CENELEC Cent
9、ral Secretariat rue de Stassart, 36 B-1050 Brussels rue de Stassart, 35 B-1050 Brussels 1999 CEN/CENELEC All rights of exploitation in any form and by any means reserved worldwide for CEN national Members and for CENELEC Members. Ref. No. EN 45510-4-6:1999 E EUROPEAN STANDARD EN 45510-4-6 NORME EURO
10、PE ENNE EUROPA ISCHE NORM April 1999 ICS 13.040.40; 27.040; 27.100 English version Guide for procurement of power station equipment Part 4: Boiler auxiliaries Section 6: Flue gas desulfurization (De-SO x ) plant Guide pour lacquisition de quipements destine s aux centrales de production de lectricit
11、e Partie 4: Auxiliaires de chaudie re Section 6: Installation de de sulfuration des fume es (De SO x ) Leitfaden fu r die Beschaffung von Ausru stungen fu r Kraftwerke Teil 4: Nebenanlagen Hauptabschnitt 6: Rauchgasentschwefelungsanlage (DeSO x ) This European Standard was approved by CEN/CENELEC on
12、 1 April 1999. CEN/CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standar
13、ds may be obtained on application to the Central Secretariat or to any CEN/CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN/CENELEC member into its own language an
14、d notified to the Central Secretariat has the same status as the official versions. CEN/CENELEC members are the national standards bodies and national electrotechnical committees, respectively, of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, L
15、uxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.Page 2 EN 45510-4-6:1999 BSI 09-1999 Foreword This European Standard has been prepared by Technical Committee CEN/CLC JTFPE, Joint Task Force Power Engineering, the Secretariat of which is held by BSI. This Europ
16、ean Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 1999, and conflicting national standards shall be withdrawn at the latest by October 1999. According to the CEN/CENELEC Internal Regulations, the nati
17、onal standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. T
18、his standard takes the form of a recommendation and is therefore entitled a “Guide”. This guide for procurement is a part of a series of guides mandated to cover the procurement of power station plant and equipment in conformity with European Procurement Directives. The guides are: EN 45510 Guide fo
19、r procurement of power station equipment Part 1: Common clauses Part 2-1: Electrical equipment Power transformers Part 2-2: Electrical equipment Uninterruptible power supplies Part 2-3: Electrical equipment Stationary batteries and chargers Part 2-4: Electrical equipment High power static converters
20、 Part 2-5: Electrical equipment Motors Part 2-6: Electrical equipment Generators Part 2-7: Electrical equipment Switchgear and control gear Part 2-8: Electrical equipment Power cables Part 2-9: Electrical equipment Cabling systems Part 3-1: Boilers Water tube boilers Part 3-2: Boilers Shell boilers
21、Part 3-3: Boilers Boilers with fluidized bed firing Part 4-1: Boiler auxiliaries Equipment for reduction of dust emissions Part 4-2: Boiler auxiliaries Gas-air, steam-air and gas-gas heaters Part 4-3: Boiler auxiliaries Draught plant Part 4-4: Boiler auxiliaries Fuel preparation equipment Part 4-5:
22、Boiler auxiliaries Coal handling and bulk storage plant Part 4-6: Boiler auxiliaries Flue gas desulfurization (De-SO x ) plant Part 4-7: Boiler auxiliaries Ash handling plant Part 4-8: Boiler auxiliaries Dust handling plant Part 4-9: Boiler auxiliaries Sootblowers Part 4-10: Boiler auxiliaries Flue
23、gas denitrification (De-NO x ) plant Part 5-1: Turbines Steam turbines Part 5-2: Turbines Gas turbines Part 5-3: Turbines Wind turbines Part 5-4: Turbines Hydraulic turbines, storage pumps and pump-turbines Part 6-1: Turbine auxiliaries Deaerators Part 6-2: Turbine auxiliaries Feedwater heaters Part
24、 6-3: Turbine auxiliaries Condenser plant Part 6-4: Turbine auxiliaries Pumps Part 6-5: Turbine auxiliaries Dry cooling systems Part 6-6: Turbine auxiliaries Wet and wet/dry cooling towers Part 6-7: Turbine auxiliaries Moisture separator reheaters Part 6-8: Turbine auxiliaries Cranes Part 6-9: Turbi
25、ne auxiliaries Cooling water systems Part 7-1: Pipework and valves High pressure piping systems Part 7-2: Pipework and valves Boiler and high pressure piping valves Part 8-1: Control and instrumentation EN 45510 part 1 contains those clauses common to all the above guides giving the provisions of a
26、non-equipment specific nature for use in the procurement of power station plant. EN 45510 is the responsibility of JTFPE. The so called “common clauses”, as appropriate, also appear in italics in the documents specific to particular equipment. In this guide, words in bold type indicate that they hav
27、e the meaning given in the definitions, clause 3. In this guide, words and sentences not in italics are specific to this guide and refer to the particular equipment covered.Page 3 EN 45510-4-6:1999 BSI 09-1999 Contents Page Foreword 2 1 Scope 4 2 Normative references 4 3 Definitions 4 3.1 Organizati
28、onal terms 4 3.2 Technical terms 5 3.3 General terms 5 4 Brief overall project description 6 4.1 Role and organization of purchaser 6 4.2 Site location 6 4.3 Equipment task 6 4.4 Equipment to be purchased 6 4.5 Control and instrumentation 6 4.6 Electrical supplies and other services 7 4.7 Other inte
29、rfaces 7 4.8 Project programme 7 4.9 Equipment identification systems 7 5 Extent of supply 7 6 Terminal points 8 7 Operational requirements 8 7.1 Operating environment 8 7.2 Manning levels 8 7.3 Normal operation 8 7.4 Operating hours 8 7.5 Start-up and shut-down 8 7.6 Abnormal conditions 8 7.7 Furth
30、er operational requirements 9 8 Life expectancy 9 8.1 Design life 9 8.2 Components requiring periodic maintenance 9 9 Performance requirements 9 9.1 Duty 9 9.2 Performance 10 9.3 Equipment margins 10 9.4 Availability 10 9.5 Levels of component redundancy 10 9.6 Further performance requirements 10 10
31、 Design and fabrication 10 10.1 Specific equipment features 10 Page 10.2 Design justification 11 10.3 Material selection 11 10.4 Safety 11 10.5 Interchangeability 12 10.6 Fabrication methods 12 11 Maintenance requirements 12 11.1 Planned maintenance 12 11.2 Personnel safety 12 11.3 Requirements for
32、access 12 11.4 Lifting requirements 12 11.5 Special tools 12 11.6 Test equipment 12 11.7 Spare parts strategy 12 11.8 Special precautions 12 12 Technical documentation requirements 13 12.1 Tender documentation 13 12.2 Contract documentation 13 13 Applicable legislation, regulations, standards and fu
33、rther requirements 13 13.1 Legislation and regulations 13 13.2 Standards 13 13.3 Further requirements 13 14 Evaluation criteria 13 14.1 General 13 14.2 Technical criteria 13 15 Quality measures 14 15.1 General 14 15.2 Approvals procedure 14 15.3 Inspection requirements 14 15.4 Non-conformity 14 16 S
34、ite factors 14 16.1 Access 14 16.2 Facilities 14 16.3 Site specific requirements 15 17 Verification of specified performance 15 17.1 General 15 17.2 Works tests 15 17.3 Tests during installation and commissioning 15 17.4 Technical conditions for trial run 15 17.5 Functional and performance tests 15
35、Annex A (informative) Bibliography 16Page 4 EN 45510-4-6:1999 BSI 09-1999 1 Scope This standard gives guidance on writing the technical specification for the procurement of processes and equipment for the removal of sulfur oxides from the flue gas of steam generating plant for use in electricity gen
36、erating stations (power stations). This guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this guide. This guide covers: wet, semi-dry
37、and dry systems; systems to meet specific flue gas discharge requirements, for example sulfur content, dust content and temperature; systems with and without marketable by-products; systems to meet specified waste product discharge limits; systems to meet limited choice of absorbent type and limitat
38、ion of water consumption. The equipment covered by this guide is defined by its function rather than design type. Therefore, the guidance to the specification is stated in performance terms rather than being specified by a detailed description of the equipment to be supplied. This guide indicates to
39、 potential purchasers how their specification should be prepared so that: the equipment type and capacity interfaces correctly with other elements of the systems particularly the boiler plant; predicted performance is achieved; ancillary equipment is properly sized; reliability, availability and saf
40、ety requirements are achieved; proper consideration is given to the evaluation process and the quality measures to be applied. This guide does not determine the type of specification (e.g. detailed, performance, functional) or the extent of supply for any given contract which is normally decided on
41、the basis of the purchasers project strategy. It does not cover: any commercial, contractual or legal issues which are normally in separate parts of an enquiry; any allocation of responsibilities which are determined by the contract. This guide does not prescribe the arrangement of the documents in
42、the enquiry. NOTE As a comprehensive European environmental policy is still under preparation, this guide does not address the environmental implications of the equipment. 2 Normative references This guide for procurement incorporates by dated or undated reference, provisions from other publications
43、. These normative references are cited in the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this guide only when incorporated in it by amendment or revision. For undated refe
44、rences, the latest edition of the publication referred to applies. EN ISO 9001, Quality systems Model for quality assurance in design, development, production, installation and servicing. (ISO 9001:1994) EN ISO 9002, Quality systems Model for quality assurance in production, installation and servici
45、ng. (ISO 9002:1994) IEC 60050 (191), International electrotechnical vocabulary. 3 Definitions For the purposes of this guide, the following definitions apply: 3.1 organizational terms 3.1.1 purchaser recipient of a product and/or a service provided by a supplier 3.1.2 supplier person or organization
46、 that provides a product and/or a service to the purchaser 3.1.3 specification document stating technical requirements of the purchaser. It may form part of an enquiry issued by a purchaser 3.1.4 enquiry invitation to tender issued by a purchaser. It will normally include a specification together wi
47、th the necessary contractual and commercial conditions 3.1.5 tender offer made by a tenderer in response to an enquiry 3.1.6 tenderer person or organization submitting a tender for the equipment in response to the enquiry 3.1.7 site place to which the equipment is to be delivered or where work is to
48、 be done by the supplier, together with so much of the area surrounding as the supplier may, with the consent of the purchaser, use for the purposes of the contract NOTE Further definitions of useful organizational terms may be found in EN ISO 8402 (see annex A).Page 5 EN 45510-4-6:1999 BSI 09-1999
49、3.2 technical terms 3.2.1 desulfurization plant (or De-SO x plant) equipment, systems and services provided to remove sulfur oxides (SO x ) from the flue gas. This includes both the equipment, systems and services directly associated with one or more gas streams being treated and/or providing a common service to several gas streams 3.2.2 process chemical or physical method for treating the gas 3.2.3 absorbent substance which chemic
