1、| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BRITISH STANDARD BS EN 45510-5-1:1998 The
2、European Standard EN 45510-5-1:1998 has the status of a British Standard ICS 27.040; 27.100 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Guide for procurement of power station equipment Part 5-1: Steam turbinesThis British Standard, having been prepared under the direction
3、of the Engineering Sector Board, was published under the authority of the Standards Board and comes into effect on 15 May 1998 BSI 1998 ISBN 0 580 29223 1 BS EN 45510-5-1:1998 Amendments issued since publication Amd. No. Date Text affected National foreword This British Standard is the English langu
4、age version of EN 45510-5-1:1998. The UK participation in its preparation was entrusted to Technical Committee E/-/20, Power engineering steering committee, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquirie
5、s on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British
6、 Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British S
7、tandard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cov
8、er, an inside front cover, the EN title page, pages 2 to 23 and a back cover.CEN European Committee for Standardization Comite Europe en de Normalisation Europa isches Komitee fu r Normung CEN Central Secretariat: rue de Stassart 36, B-1050 Brussels CENELEC European Committee for Standardization Com
9、ite Europe en de Normalisation Europa isches Komitee fu r Normung CENELEC Central Secretariat: rue de Stassart 35, B-1050 Brussels 1998 CEN/CENELEC All rights of exploitation in any form and by any means reserved worldwide for CEN national Members and for CENELEC Members. Ref. No. EN 45510-5-1:1998
10、E EUROPEAN STANDARD EN 45510-5-1 NORME EUROPE ENNE EUROPA ISCHE NORM January 1998 ICS 27.040; 27.100 Descriptors: Electric power station, turbines, steam engines, purchase, user supplier relations, invitation of tenders, specifications, technical writing English version Guide for procurement of powe
11、r station equipment Part 5-1: Steam turbines Guide pour lacquisition de quipements destine s aux centrales de production de lectricite Partie 5-1: Turbines a vapeur Leitfaden fu r die Beschaffung von Ausru stungen fu r Kraftwerke Teil 5-1: Dampfturbinen This European Standard was approved by CEN/CEN
12、ELEC on 11 December 1997. CEN/CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such natio
13、nal standards may be obtained on application to the Central Secretariat or to any CEN/CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN/CENELEC member into its own
14、language and notified to the Central Secretariat has the same status as the official versions. CEN/CENELEC members are the national standards bodies and national electrotechnical committees, respectively, of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Irelan
15、d, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.Page 2 EN 45510-5-1:1998 BSI 1998 Foreword This standard takes the form of a recommendation and is therefore entitled a “Guide”. This Guide for procurement has been prepared by the CEN/CENELEC Joint Ta
16、sk Force Power Engineering (JTFPE), the Secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 1998, and conflicting national standards shall be withdrawn at the
17、 latest by July 1998. This Guide for procurement has been prepared under mandates given to CEN and CENELEC by the European Commission and the European Free Trade Association. This Guide for procurement is a part of a series of Guides mandated to cover the procurement of power station plant and equip
18、ment in conformity with European Procurement Directives. The Guides are: EN 45510: Guide for procurement of power station equipment Part 1: Common clauses Part 2-1: Electrical equipment Power transformers Part 2-2: Electrical equipment Uninterruptible power supplies Part 2-3: Electrical equipment St
19、ationary batteries and chargers Part 2-4: Electrical equipment High power static converters Part 2-5: Electrical equipment Motors Part 2-6: Electrical equipment Generators Part 2-7: Electrical equipment Switchgear and controlgear Part 2-8: Electrical equipment Power cables Part 2-9: Electrical equip
20、ment Cabling systems Part 3-1: Boilers Water tube boilers Part 3-2: Boilers Shell boilers Part 3-3: Boilers Boilers with fluidized bed firing Part 4-1: Boiler auxiliaries Equipment for reduction of dust emissions Part 4-2: Boiler auxiliaries Gas-air, steam-air and gas-gas heaters Part 4-3: Boiler au
21、xiliaries Draught plant Part 4-4: Boiler auxiliaries Fuel preparation equipment Part 4-5: Boiler auxiliaries Coal handling and bulk storage plant Part 4-6: Boiler auxiliaries Flue gas desulphurization (De-SO x ) plant Part 4-7: Boiler auxiliaries Ash handling plant Part 4-8: Boiler auxiliaries Dust
22、handling plant Part 4-9: Boiler auxiliaries Sootblowers Part 4-10: Boiler auxiliaries Flue gas denitrification (De-NO x ) plant Part 5-1: Turbines Steam turbines Part 5-2: Turbines Gas turbines Part 5-3: Turbines Wind turbines Part 5-4: Turbines Hydraulic turbines, storage pumps and pump-turbines Pa
23、rt 6-1: Turbine auxiliaries Deaerators Part 6-2: Turbine auxiliaries Feedwater heaters Part 6-3: Turbine auxiliaries Condenser plant Part 6-4: Turbine auxiliaries Pumps Part 6-5: Turbine auxiliaries Dry cooling systems Part 6-6: Turbine auxiliaries Wet and wet/dry cooling towers Part 6-7: Turbine au
24、xiliaries Moisture separator reheaters Part 6-8: Turbine auxiliaries Cranes Part 6-9: Turbine auxiliaries Cooling water systems Part 7-1: Pipework and valves High pressure piping systems Part 7-2: Pipework and valves Boiler and high pressure piping valves Part 8-1: Control and instrumentation EN 455
25、10 Part 1 contains those clauses common to all the above Guides giving the provisions of a non equipment specific nature for use in the procurement of power station plant. EN 45510 is the responsibility of JTFPE. The so called “common clauses”, as appropriate, also appear in italics in the documents
26、 specific to particular equipment. Where paragraphs of “common clauses” are omitted, each paragraph omitted is indicated by the symbol *. In this Guide, words in bold type indicate that they have the meaning given in the definitions, clause 3. In this Guide, words and sentences not in italics are sp
27、ecific to this Guide and refer to the particular equipment covered. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, G
28、reece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.Page 3 EN 45510-5-1:1998 BSI 1998 Contents Page Foreword 2 1 Scope 4 2 Normative references 4 3 Definitions 4 3.1 Organizational terms 4 3.2 Technical terms 5 3.3 General term
29、s 5 4 Brief overall project description 5 4.1 Role and organization of purchaser 5 4.2 Site location 5 4.3 Equipment task 6 4.4 Equipment to be purchased 6 4.5 Control and instrumentation 6 4.6 Electrical supplies and other services 6 4.7 Other interfaces 6 4.8 Project programme 6 4.9 Equipment iden
30、tification systems 6 5 Extent of supply 6 6 Terminal points 7 7 Operational requirements 7 7.1 Operating environment 7 7.2 Manning levels 7 7.3 Normal operation 7 7.4 Operating hours 7 7.5 Start-up and shut-down 7 7.6 Abnormal conditions 7 7.7 Further operational requirements 8 8 Life expectancy 8 8
31、.1 Design life 8 8.2 Components requiring periodic maintenance 8 9 Performance requirements 8 9.1 Duty 8 9.2 Performance 8 9.3 Equipment margins 8 9.4 Availability 8 9.5 Levels of component redundancy 8 9.6 Further performance requirements 8 10 Design and fabrication 9 10.1 Specific equipment featur
32、es 9 10.2 Design justification 9 10.3 Material selection 9 10.4 Safety 9 10.5 Interchangeability 9 10.6 Fabrication methods 9 Page 11 Maintenance requirements 10 11.1 Planned maintenance 10 11.2 Personnel safety 10 11.3 Requirements for access 10 11.4 Lifting requirements 10 11.5 Special tools 10 11
33、.6 Test equipment 10 11.7 Spare parts strategy 10 11.8 Special precautions 10 12 Technical documentation requirements 10 12.1 Tender documentation 10 12.2 Contract documentation 10 13 Applicable legislation, regulations, standards and further requirements 11 13.1 Legislation and regulations 11 13.2
34、Standards 11 13.3 Further requirements 11 14 Evaluation criteria 11 14.1 General 11 14.2 Technical criteria 11 15 Quality measures 11 15.1 General 11 15.2 Approvals procedure 11 15.3 Inspection requirements 12 15.4 Non-conformity 12 16 Site factors 12 16.1 Access 12 16.2 Facilities 12 16.3 Site spec
35、ific requirements 12 17 Verification of specified performance 12 17.1 General 12 17.2 Works tests 12 17.3 Tests during installation and commissioning 12 17.4 Technical conditions for trial run 13 17.5 Functional and performance tests 13 Annex A (informative) Bibliography 14 Annex B (informative) Ter
36、minal points of supply 14 Annex C (informative) Schedule for performance specification 15 Annex D (informative) Design information to be provided by the supplier 17 Annex E (informative) Maintenance schedule 22 Annex F (informative) Purpose and extent of documentation 23Page 4 EN 45510-5-1:1998 BSI
37、1998 1 Scope This standard gives guidance on writing the technical specification for the procurement of steam turbines driving generators for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area o
38、f nuclear power stations. Other possible applications of such equipment have not been considered in the preparation of this Guide. This Guide covers: reheat and non-reheat turbine; back-pressure turbine whose exhaust will be used for process heating; condensing turbine whose exhaust is directly conn
39、ected to a condenser ; mixed pressure turbine; regenerative cycle turbine; extraction turbine; combined cycle turbine. This Guide for procurement of steam turbines has been prepared to be used with the existing European Standard EN 60045-1, it should, therefore, be read in addition and complementary
40、 to the European Standard. The equipment covered by this Guide is defined by its function rather than design type. Therefore, the guidance to the specification is stated in performance terms rather than being specified by a detailed description of the equipment to be supplied. This Guide indicates t
41、o potential purchasers how their specification should be prepared so that: the equipment type and capacity interfaces correctly with other elements of the systems; predicted performance is achieved; ancillary equipment is properly sized; reliability, availability and safety requirements are achieved
42、; proper consideration is given to the evaluation process and the quality measures to be applied. This Guide does not determine the type of specification (e.g. detailed, performance, functional) or the extent of supply for any given contract which is normally decided on the basis of the purchasers p
43、roject strategy. It does not cover: any commercial, contractual or legal issues which are normally in separate parts of an enquiry; any allocation of responsibilities which are determined by the contract. This Guide does not prescribe the arrangement of the documents in the enquiry. NOTE As a compre
44、hensive European environmental policy is still under preparation, this Guide does not address the environmental implications of the equipment. 2 Normative references This Guide for procurement incorporates by dated or undated reference, provisions from other publications. These normative references
45、are cited in the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this Guide only when incorporated in it by amendment or revision. For undated references, the latest edition of
46、 the publication referred to applies. EN ISO 9001, Quality systems Model for quality assurance in design, development, production, installation and servicing (ISO 9001:1994). EN ISO 9002, Quality systems Model for quality assurance in production, installation and servicing (ISO 9002:1994). IEC 50 (1
47、91), International electrotechnical vocabulary Chapter 191: Dependability and quality of services. IEC 1063, Acoustics Measurement of airborne noise emitted by steam turbines and driven machines. EN 60045-1, Steam turbines Part 1: Specifications. 3 Definitions For the purposes of this Guide, the fol
48、lowing definitions apply. 3.1 organizational terms 3.1.1 purchaser recipient of a product and/or a service provided by a supplier 3.1.2 supplier person or organization that provides a product and/or a service to the purchaser 3.1.3 specification document stating technical requirements of the purchas
49、er. It may form part of an enquiry issued by a purchaser 3.1.4 enquiry invitation to tender issued by a purchaser. It will normally include a specification together with the necessary contractual and commercial conditions 3.1.5 tender offer made by a tenderer in response to an enquiry 3.1.6 tenderer person or organization submitting a tender for the equipment in response to the enquiryPage 5 EN 45510-5-1:1998 BSI 1998
