1、BRITISH STANDARDBS EN 50065-4-7:2005Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz Part 4-7: Portable low voltage decoupling filters Safety requirementsICS 31.160; 33.040.30; 97.120g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g5
2、5g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 50065-4-7:2005This British Standard was published under the authority of the Standards Policy and Strategy Committee on 4 October 2005 BSI 2007IS
3、BN 978 0 580 60841 4National forewordThis British Standard is the UK implementation of EN 50065-4-7:2005, incorporating corrigendum October 2006.The start and finish of text introduced or altered by corrigendum is indicated in the text by tags . Text altered by CENELEC corrigendum October 2006 is in
4、dicated in the text by .The UK participation in its preparation was entrusted to Technical Committee PEL/205, Mains signalling.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions o
5、f a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.Amendments/corrigenda issued since publicationDate Comments31 December 2007 See national forewordEUROPEAN STANDARD EN 50065-4-7 NORME EUROPENNE EUROPISCHE
6、NORM July 2005 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2005 CENELEC - All rights of exploitation in any form and by any
7、means reserved worldwide for CENELEC members. Ref. No. EN 50065-4-7:2005 E ICS 31.160; 33.040.30; 97.120 Incorporating corrigendum October 2006English version Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz Part 4-7: Portable low vol
8、tage decoupling filters Safety requirements Transmission de signaux sur les rseaux lectriques basse tension dans la bande de frquences de 3 kHz 148,5 kHz et de 1,6 MHz 30 MHz Partie 4-7: Filtres portables basse tension de dcouplage Exigences de scurit Signalbertragung auf elektrischen Niederspannung
9、snetzen im Frequenzbereich 3 kHz bis 148,5 kHz und 1,6 MHz bis 30 MHz Teil 4-7: Bewegliche Niederspannungs-Entkopplungsfilter Sicherheitsanforderungen This European Standard was approved by CENELEC on 2004-12-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which sti
10、pulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Stand
11、ard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the nation
12、al electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kin
13、gdom. EN 50065-4-7:2005 2 Foreword This European Standard was prepared by SC 205A, Mains communicating systems, of Technical Committee CENELEC TC 205, Home and Building Electronic Systems (HBES). The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN
14、 50065-4-7 on 2004-12-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2006-02-01 latest date by which the national standards conflicting with the EN have to be withdrawn (
15、dow) 2007-12-01 This safety standard EN 50065-4-7 has no frequency dependent content. It was originally conceived as a safety document within the EN 50065 set of standards, which have a frequency of 3 kHz to 148,5 kHz. When the scope of SC205A was extended to 30 MHz, SC 205A agreed that the scope of
16、 the published safety standard, EN 50065-4-2, Low voltage decoupling filters - Safety requirements, should be amended to include the band 1,6 MHz to 30 MHz in order to cover the additional set of standards for 1,6 MHz to 30 MHz. This required no technical changes to the body of the document. In addi
17、tion, it was agreed that Part 4-7, Portable low voltage decoupling filters - Safety requirements, should also cover both frequency ranges. For this reason the title of this part of EN 50065 covers the extended frequency ranges 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz. When certifying or making decla
18、ration of conformity to the Low Voltage Directive 73/23/EEC in order to CE mark the device it is important to state that the CE marking is only valid for the filter parts of the product. The plug parts and socket-outlets parts are not covered by the Low Voltage Directive and shall therefore comply w
19、ith the relevant national standards. Structure of EN 50065 series: Reference Title EN 50065 Signalling on low voltage electrical installations in the frequency range 3 kHz to 148,5 kHzEN 50065-1 Part 1: General requirements, frequency bands and electromagnetic disturbances EN 50065-2-1 Part 2-1: Imm
20、unity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in residential, commercial and light industrial environments EN 50065-2-2 Part 2-2: Immunity requirements for mains communications equipment and systems op
21、erating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in industrial environments EN 50065-2-3 Part 2-3: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by electricity suppliers and
22、distributors EN 50065-4-1 Part 4-1: Low voltage decoupling filters - Generic specification EN 50065-4-2 Part 4-2: Low voltage decoupling filters - Safety requirements EN 50065-4-3 Part 4-3: Low voltage decoupling filters - Incoming filter EN 50065-4-4 Part 4-4: Low voltage decoupling filters - Imped
23、ance filter EN 50065-4-5 Part 4-5: Low voltage decoupling filters - Segmentation filter EN 50065-4-6 Part 4-6: Low voltage decoupling filters - Phase coupler EN 50065-4-7 Part 4-7: Low voltage decoupling filters - Safety requirements EN 50065-7 Part 7: Equipment impedance The contents of the corrige
24、ndum of October 2006 have been included in this copy. 3 EN 50065-4-7:2005 Contents 1 Scope 5 2 Normative references . 5 3 Definitions . 6 4 General requirements . 9 5 General notes on tests 9 6 Rating 9 7 Classification. 10 8 Marking . 11 9 Dimensions . 13 10 Protection against electric shock 13 11
25、Provision for protective earthing . 14 12 Terminals 15 13 Construction 15 14 Resistance to ageing, protection provided by enclosures, and resistance to humidity 18 15 Insulation resistance and dielectric strength. 20 16 Temperature rise 21 17 Breaking capacity . 23 18 Normal operation 23 19 Force ne
26、cessary to withdraw the plug 23 20 Flexible cables and their connections. 23 21 Mechanical strength 26 22 Resistance to heat 27 23 Screws, current-carrying parts and connections 28 24 Creepage distances and clearances 30 25 Resistance to abnormal heat, to fire and to tracking 34 26 Resistance to rus
27、ting 36 27 Components 36 28 Abnormal conditions . 38 29 Protection against short-circuit . 39 30 Resistance to transients . 40 Annex A (normative) Pollution degrees.45 Annex B (normative) Proof tracking test46 Annex C (normative) Types of coatings for rigid printed board assemblies. 47 Annex D (norm
28、ative) Special national conditions48 EN 50065-4-7:2005 4 Table 1 Symbols for identification of the terminals12 Table 2 Connectable cross-sections of copper conductors 15 Table 3 Minimum insulation resistances .20 Table 4 Dielectric strength.21 Table 5 Test current 21 Table 6 Permissible temperature
29、rise maximum temperatures.22 Table 7 Make-up of cables suitable for the retention test of rewirable filter devices 23 Table 8 Minimum cross-sectional area for cables for non-rewirable filter devices.24 Table 9 Minimum clearances for basic insulation .31 Table 10 Minimum creepage distances for basic
30、insulation32 Table 11 Minimum creepage distances for functional insulation 33 Table 12 Test levels and conditions 34 Figure 1 Examples of types of connection classified according to 7.341 Figure 2 Apparatus for testing the cord retention (20.2) .42 Figure 3 Apparatus for flexing test (20.3.2) . 43 F
31、igure 4 Apparatus for impact test at low temperature (21.2.3). 44 5 EN 50065-4-7:2005 1 Scope This European product safety standard applies to the filter part of portable devices for household and similar uses (hereafter referred to as portable decoupling filters) consisting of the filter part, a pl
32、ug or an appliance inlet or a provision for connection by terminals or with a non-rewirable cord and one (multiple) socket-outlet or an appliance outlet. They are intended for single-phase circuits for nominal currents not exceeding 16 A and for nominal voltages not exceeding 250 V a.c. to neutral o
33、perating in the frequency range 3 kHz to 148,5 kHz and from 1,6 MHz to 30 MHz. The filtering functions are described in EN 50065-4-1. This standard does not cover phase couplers. Portable decoupling filters shall not be used as part of the fixed installation, where EN 50065-4-2 applies. Plugs and so
34、cket-outlets connected to the filter part and plugs and socket-outlets integrated with the filter part shall comply with the relevant national standard(s). Appliance inlets and appliance outlets connected to the filter part shall comply with the relevant parts of the EN 60320 series. Appliance inlet
35、s and appliance outlets integrated with the filter parts are not covered by this standard. This standard can be used for portable mains communication devices when no other product standard exists. This standard can be used for other portable mains filters other than those described in EN 50065-4-1 w
36、hen no other product standard exists. Filters including batteries are not covered by this standard. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the late
37、st edition of the referenced document (including any amendments) applies. EN 60065 2002 Audio, video and similar electronic apparatus Safety requirements (IEC 60065:2001, mod) EN 60068-2-32 Environmental testing Part 2: Tests Test Ed: Free fall (IEC 60068-2-32) EN 60068-2-75 Environmental testing Pa
38、rt 2-75: Tests Test Eh: Hammer tests (IEC 60068-2-75) EN 60112 2003 Method for the determination of the proof and the comparative tracking indices of solid insulating materials (IEC 60112:2003) EN 60127 Series Miniature fuses (IEC 60127) EN 60320 Series Appliance couplers for household and similar g
39、eneral purposes (IEC 60320) EN 60529 Degrees of protection provided by enclosures (IP code) (IEC 60529) EN 60664-1 2003 Insulation coordination for equipment within low-voltage systems Part 1: Principles, requirements and tests (IEC 60664-1:1992 + A1:2000 + A2:2002) EN 60664-3 Insulation coordinatio
40、n for equipment within low-voltage systems Part 3: Use of coating, potting or moulding for protection against pollution (IEC 60664-3) EN 50065-4-7:2005 6 EN 60695-2-11 Fire hazard testing Part 2-11: Glowing/hot-wire based test methods Glow-wire flammability test method for end-products (IEC 60695-2-
41、11) EN 60695-10-2 Fire hazard testing Part 10-2: Abnormal heat Ball pressure test (IEC 60695-10-2) EN 60721-3-3 Classification of environmental conditions Part 3: Classification of groups of environmental parameters and their severitys Section 3: Stationary use at weather protected locations (IEC 60
42、721-3-3) EN 60893-1 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements (IEC 60893-1) EN 60999-1 2000 Connecting devices - Electrical copper conductors - Safety requirements for sc
43、rew-type and screwless-type clamping units Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm up to 35 mm2(included) (IEC 60999-1:1999) EN 61032 Protection of persons and equipment by enclosures Probes for verification (IEC 61032) EN 61140 2002 Pro
44、tection against electric shock Common aspects for installation and equipment (IEC 61140:2001) EN 61180-1 High-voltage test techniques for low-voltage equipment Part 1: Definitions, test and procedure requirements (IEC 61180-1) EN 61180-2 High-voltage test techniques for low-voltage equipment Part 2:
45、Test equipment (IEC 61180-2) EN 132400 Sectional Specification: Fixed capacitors for electromagnetic interference suppression and connection to the supply mains (Assessment level D) HD 21 Series Cables of rated voltages up to and including 450/750 V and having thermoplastic insulation (IEC 60227, mo
46、d) HD 22 Series Cables of rated voltages up to and including 450/750 V and having cross-linked insulation (IEC 60245, mod) IEC 60085 Thermal evaluation and classification of electrical insulation IEC 60417, database Graphical symbols for use on equipment IEC 60884-1 2002 Plugs and socket-outlets for
47、 household and similar purposes - Part 1: General requirements IEC 60884-2-5 1995 Plugs and socket-outlets for household and similar purposes - Part 2: Particular requirements for adaptors 3 Definitions For the purpose of this CENELEC standard, the following definitions apply. Where the terms “volta
48、ge“ and “current“ are used, they imply r.m.s. values, unless otherwise specified. Throughout this standard, the word “earthing“ is used for “protective earthing“. The term “accessory“ is used as a general term covering plugs and portable socket-outlets. The use of the accessories is shown in Figure
49、1a of IEC 60884-1. Text deleted 7 EN 50065-4-7:2005 3.1 Definitions (from IEC 60884-1) relating to plugs and socket-outlets 3.1.1 plug accessory having pins designed to engage with the contacts of a socket-outlet, also incorporating means for the electrical connection and mechanical retention of flexible cables or cords 3.1.2 socket-outlet accessory having socket-contacts designed to engage with the pins of a plug and having terminals for the connection of cable
