1、BSI Standards PublicationBS EN 50571:2013Household and similar electrical appliances Safety Particular requirements for commercial electric washing machinesBS EN 50571:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 50571:2013. The UK participation in its p
2、reparation was entrusted to TechnicalCommittee CPL/61, Safety of household and similar electrical appliances.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. User
3、s are responsible for its correct application. The British Standards Institution 2013.Published by BSI Standards Limited 2013ISBN 978 0 580 76757 9ICS 97.060Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the
4、 Standards Policy and Strategy Committee on 30 November 2013.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS EN 50571:2013EUROPEAN STANDARD EN 50571 NORME EUROPENNE EUROPISCHE NORM November 2013 CENELEC European Committee for Electrotechnical Standardization Comit Europe
5、n de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50571:2013 E ICS 97.060 E
6、nglish version Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines Appareils lectrodomestiques et analogues - Scurit - Rgles particulires pour les machines laver le linge usage collectif Sicherheit elektrischer Gerte fr den Hausgebr
7、auch und hnliche Zwecke - Besondere Anforderungen fr elektrische Waschmaschinen fr den gewerblichen Gebrauch This European Standard was approved by CENELEC on 2013-06-10. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Euro
8、pean Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official ver
9、sions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical co
10、mmittees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia
11、, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 50571:2013EN 50571:2013 2 Contents Page Foreword . 4 Introduction . 5 1 Scope 6 2 Normative references 7 3 Terms and definitions . 7 4 General requirement . 9 5 General conditions for the tests 9 6 Classification . 9 7 Mark
12、ing and instructions 9 8 Protection against access to live parts . 11 9 Starting of motor-operated appliances . 12 10 Power input and current . 12 11 Heating 12 12 Void . 14 13 Leakage current and electric strength at operating temperature . 14 14 Transient overvoltages . 14 15 Moisture resistance .
13、 14 16 Leakage current and electric strength 15 17 Overload protection of transformers and associated circuits 15 18 Endurance 15 19 Abnormal operation . 16 20 Stability and mechanical hazards 17 21 Mechanical strength 19 22 Construction . 20 23 Internal wiring 22 24 Components . 23 25 Supply connec
14、tion and external flexible cords 23 26 Terminals for external conductors. 23 27 Provision for earthing . 23 28 Screws and connections . 23 29 Clearances, creepage distances and solid insulation . 23 30 Resistance to heat and fire . 23 31 Resistance to rusting 24 32 Radiation, toxicity and similar ha
15、zards . 24 Annex AA (normative) Detergent and rinsing agent 26 Annex BB (normative) Ageing test for elastomeric parts . 27 Annex CC (normative) Emission of acoustical noise 28 Annex ZE (informative) Specific additional requirements for appliances and machines intended for commercial use . 31 BS EN 5
16、0571:2013BS EN 50571:2013 3 EN 50571:2013 Annex ZZ (informative) Coverage of Essential Requirements of EU Directives. 32 Bibliography 33 Figure Figure 101 Probe for measuring surface temperatures . 24 Tables Table 3 Maximum normal temperature rises . 14 Table AA.1 Composition of the detergent . 26 T
17、able AA.2 Rinsing agent 26 BS EN 50571:2013BS EN 50571:2013EN 50571:2013 4 Foreword This document (EN 50571:2013) has been prepared by CLC/TC 61 “Safety of household and similar electrical appliances“. The following dates are fixed: latest date by which this document has to be implemented at nationa
18、l level by publication of an identical national standard or by endorsement (dop) 2014-06-10 latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2016-06-10 EN 50571:2013 is to be read in conjunction with EN 60335-1:2012 and its amendments, which is re
19、ferred to in this text as “Part 1”. This standard supplements or modifies the corresponding clauses of Part 1 as indicated in the text. NOTE The following numbering system is used: subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1; unless notes are
20、in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a replaced clause or subclause; additional annexes are lettered AA, BB, etc. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade
21、Association, and supports essential requirements of EU Directive(s). For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this document. _ BS EN 50571:2013BS EN 50571:2013 5 EN 50571:2013 Introduction This European Standard has been prepared to provide a m
22、eans of conforming to essential safety requirements of the Machinery Directive 2006/42/EC. Other requirements and other EU Directives may be applicable to the machines within the scope of this standard. This standard is a product family standard dealing with the safety of commercial electric washing
23、 machines and takes precedence over horizontal and generic standards covering the same subject. This standard recognises the level of protection against hazards such as electrical, mechanical, thermal, fire and radiation of commercial electric washing machines when operated as in normal use taking i
24、nto account the manufacturers instructions. It also covers any reasonably foreseeable misuse of the machinery and takes into account the way in which electromagnetic phenomena can affect the safe operation of commercial electric washing machines. A commercial electric washing machine that complies w
25、ith the text of this standard will not necessarily be considered to comply with the safety principles of the standard if, when examined and tested, it is found to have other features that impair the level of safety covered by these requirements. This standard takes into account the requirements of H
26、D 60364-1 as far as possible so that there is compatibility with the wiring rules when the machinery is connected to the supply mains. However, national wiring rules may differ. BS EN 50571:2013BS EN 50571:2013EN 50571:2013 6 1 Scope This clause of Part 1 is replaced by the following: This European
27、Standard deals with the safety of electrical operated washing machines intended to be used by trained users in e.g. hotels, hospitals, factories, in light industry and on farms. It also covers washing machines declared for commercial use in public areas and operated by lay persons e.g. in laundrette
28、s, communal laundry rooms. Their rated voltage being not more than 250 V for single phase and 480 V for others. This standard also covers washing machines making use of other energy sources. It does not cover requirements for these other energy sources or compressed air. However the influence of the
29、se other energy sources on the machines is covered. These washing machines are designed to be connected to hot and/or cold water supply. Washing machines making use of steam or hot water for heating purposes are also within the scope of this standard. This standard deals with the common hazards pres
30、ented by washing machines that are encountered by all persons. However, in general, it does not take into account: a) persons (including children) whose: 1) physical, sensory or mental capabilities, or 2) lack of experience and knowledge, prevents them from using the washing machine safely without s
31、upervision or instruction; b) children playing with the washing machine. Attention is drawn to the fact that: for commercial electric washing machines intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary, in many countries additional requirements ar
32、e specified by the national health authorities, the national authorities responsible for the protection of labour, the national water supply authorities and similar authorities, for commercial electric washing machines having a drying function, EN 50570 (commercial electric tumble dryers) is also ap
33、plicable. This European Standard does not apply to: c) industrial laundry machinery (EN ISO 10472-2), d) washing machines intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas). For the purpose of this stan
34、dard, the term “appliance” is to be read as “washing machine intended for commercial use. BS EN 50571:2013BS EN 50571:2013 7 EN 50571:2013 2 Normative references This clause of Part 1 is applicable except as follows: Addition: EN 60204-1:2006/A1:2009, Safety of machinery Electrical equipment of mach
35、ines Part 1: General requirements (IEC 60204-1:2005/A1:2008) EN 60335-1:2012, Household and similar electrical appliances Safety Part 1: General requirements (IEC 60335-1:2010, modified) EN 60704-1:2010 Household and similar electrical appliances Test code for the determination of airborne acoustica
36、l noise Part 1: General requirements (IEC 60704-1:2010) EN 60730-2-12:2006, Automatic electrical controls for household and similar use Part 2-12: Particular requirements for electrically operated door locks (IEC 60730-2-12:2005, modified) EN ISO 3744, Acoustics Determination of sound power levels a
37、nd sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane (ISO 3744) EN ISO 3746, Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping
38、 measurement surface over a reflecting plane (ISO 3746) EN ISO 4871, Acoustics Declaration and verification of noise emission values of machinery and equipment (ISO 4871) EN ISO 9614-2, Acoustics Determination of sound power levels of noise sources using sound intensity Part 2: Measurement by scanni
39、ng (ISO 9614-2) EN ISO 11201, Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201) EN ISO 11203,
40、 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203) EN ISO 11688-1, Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Pla
41、nning (ISO/TR 11688-1) ISO 1817, Rubber, vulcanized or thermoplastic Determination of the effect of liquids Replace the reference to EN 62233 by: EN 62233:2008, Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure (IEC 62233:2005,
42、 modified) 3 Terms and definitions This clause of Part 1 is applicable except as follows: 3.1.9 normal operation Addition: the appliance is filled with textile material having a mass in the dry condition equal to the maximum mass stated in the instructions, and with the maximum quantity of water for
43、 which it is constructed. However, if the power input or current is higher when only 50 % of the textile material is used, the appliance is operated with this load instead The temperature of the water is: 65 C 5 C for appliances without heating elements, 15 C 5 C for other appliances, BS EN 50571:20
44、13BS EN 50571:2013EN 50571:2013 8 15 C 5 C for appliances without heating elements and intended for connection to the cold water supply only. If the appliance does not incorporate a programmer, the water is heated to 90 C 5 C or as high as the construction will allow if lower, before starting the fi
45、rst washing period. The textile material consists of pre-washed double-hemmed cotton sheets having dimensions approximately 70 cm 70 cm and a specific mass between 140 g/m and 175 g/m in the dry condition. For impeller type appliances, if the textile material does not move properly during operation,
46、 the quantity of textile material may be reduced until the maximum power input of the motor is attained, or a textile material comprising pre-washed double-hemmed cotton sheets, having dimensions of approximately 90 cm x 90 cm and a mass between 90 g/m2and 110 g/m2in the dry condition, may be used.
47、However, for impeller type appliances, in case of doubt, the test should be carried out using the reduced quantity of textile material. Addition: 3.1.101 washing machine appliances for cleaning and rinsing of textiles using water which may also have a means of extracting excess water from the textil
48、es 3.1.102 agitator washing machine appliance in which the textiles are substantially immersed in the washing water, the mechanical action being produced by a device moving about or along its vertical axis with a reciprocating motion (an agitator). This device usually extends above the maximum water
49、 level 3.1.103 horizontal drum washing machine appliance in which the textiles are placed in a horizontal or inclined drum and partially immersed in the washing water, the mechanical action being produced by rotation of the drum about its axis, the movement being either continuous or periodically reversed 3.1.104 impeller washing machine appliance in which the textiles are substantially immersed in the washing water, the mechanical actio
