1、Marking codes for resistors and capacitorsBS EN 60062:2016Incorporating corrigendum December 2016(IEC 60062:2016)BSI Standards PublicationBS EN 60062:2016 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 60062:2016. It is identical to IEC 60062:2016, incorporatin
2、g corrigendum December 2016. It supersedes BS EN 60062:2005 which is withdrawn.The start and finish of text introduced or altered by corrigendum is indicated in the text by tags. Text altered by IEC corrigendum December 2016 is indicated in the text by g67g68.The UK participation in its preparation
3、was entrusted to Technical Committee EPL/40X, Capacitors and resistors for electronic equipment.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are respons
4、ible for its correct application. The British Standards Institution 201. Published by BSI Standards Limited 201ISBN 978 0 580 96943 0ICS 31.020Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Pol
5、icy and Strategy Committee on 30 November 2016.Amendments/corrigenda issued since publicationDate Text affected31 January 2017 Implementation of IEC corrigendum December 2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60062 October 2016 ICS 31.020 Supersedes EN 60062:2005English Version Mar
6、king codes for resistors and capacitors (IEC 60062:2016) Codes de marquage des rsistances et des condensateurs (IEC 60062:2016) Kennzeichnung von Widerstnden und Kondensatoren (IEC 60062:2016) This European Standard was approved by CENELEC on 2016-08-16. CENELEC members are bound to comply with the
7、CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management
8、Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same s
9、tatus as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithua
10、nia, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische
11、Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60062:2016 EBS EN 60062:2016EN 60062:2016 European foreword The text of document 40/2465/FDIS, future edit
12、ion 6 of IEC 60062, prepared by IEC/TC 40 “Capacitors and resistors for electronic equipment“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60062:2016. The following dates are fixed: g120 latest date by which the document has to be implemented at national level by publ
13、ication of an identical national standard or by endorsement (dop) 2017-05-16 g120 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2019-08-16 This document supersedes EN 60062:2005. Attention is drawn to the possibility that some of the elements of
14、 this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60062:2016 was approved by CENELEC as a European Standard without any modification. In the
15、 official version, for Bibliography, the following note has to be added for the standard indicated : ISO 1043-1 NOTE Harmonized as EN ISO 1043-1. BS EN 60062:2016 2 BS EN 60062:2016EN 60062:2016EN 60062:2016 Annex ZA (normative) Normative references to international publications with their correspon
16、ding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any a
17、mendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Y
18、ear Title EN/HD Year IEC 60063 - Preferred number series for resistors and capacitors EN 60063 - IEC 60757 - Code for designation of colours HD 457 S1 - ISO 8601 - Data elements and interchange formats - Information interchange - Representation of dates and times - - BS EN 60062:2016 3 BS EN 60062:2
19、016EN 60062:2016 2 IEC 60062:2016 IEC 2016 CONTENTS FOREWORD . 4 1 Scope 6 2 Normative references. 6 3 Colour code for fixed resistors . 6 3.1 General rules 6 3.2 Prescription of code colours 6 3.3 Methods for marking resistance value and tolerance 7 3.3.1 Marking of resistance values with two signi
20、ficant numerals . 7 3.3.2 Marking of resistance values with two significant numerals and tolerance . 8 3.3.3 Marking of resistance values with three significant numerals and tolerance . 8 3.4 Methods for TCR marking 9 4 Letter and numeral code for resistance and capacitance values 10 4.1 General rul
21、es 10 4.2 Resistors 11 4.2.1 The RKM code system . 11 4.2.2 Three-character code system for resistors 13 4.2.3 The four-character code system for resistors 14 4.3 Capacitors 15 4.3.1 The multiplier code system for capacitors . 15 4.3.2 Three-character code systems for capacitors 17 5 Letter code for
22、 tolerance on capacitance or resistance values 18 5.1 General rules 18 5.2 Coding of symmetrical relative tolerances 18 5.3 Coding of asymmetrical relative tolerances 19 5.4 Coding of symmetrical absolute tolerances 19 5.5 Other coding of tolerances 20 6 Coding of properties specific to capacitors .
23、 20 6.1 General rules 20 6.2 Coding of the dielectric material of plastic film capacitors . 20 7 Coding of properties specific to resistors 20 7.1 General rules 20 7.2 Coding of the temperature coefficient of resistance 21 8 Date code system for capacitors and resistors 21 8.1 General rules 21 8.2 T
24、wo-character codes for year and month . 22 8.2.1 Choice of a repetition cycle 22 8.2.2 Two-character codes for year and month in a twenty-year cycle 22 8.2.3 Two-character codes for year and month in a ten-year cycle . 23 8.3 Four-character codes for year and week 23 8.3.1 Choice of a repetition cyc
25、le 23 8.3.2 Fully numerical four-numeral code 23 8.3.3 Alphanumerical twenty-year cycle code 24 8.3.4 Alphanumerical ten-year cycle code . 24 8.4 Single-character code for year and month 24 BS EN 60062:2016BS EN 60062:2016IEC 60062:2016 IEC 2016 4 6888899910101112121313141617171920202021212222222222
26、2223232324242425252525262626IEC 60062:2016 IEC 2016 3 Annex A (informative) Special three-character code system for resistors . 26 Annex B (informative) Cross-reference for references to the previous edition of this standard . 28 Bibliography . 30 Figure 1 Colour marking of a resistor 6,8 kg58, tole
27、rance g11420 % 8 Figure 2 Colour marking of a resistor 750 kg58, tolerance g1145 % . 8 Figure 3 Colour marking of a resistor 249 kg58, tolerance g1141 % . 9 Figure 4 Colour marking of a resistor with a 6thband for TCR marking 9 Figure 5 Colour marking of a resistor with an interrupted 6thband for TC
28、R marking . 10 Figure 6 Colour marking of a resistor using an alternative method of inter-band colour dots for TCR coding 10 Table 1 Code colour prescriptions 7 Table 2 Coding of resistance values with up to 3 significant numerals . 12 Table 3 Fixed length coding of resistance values with up to 3 si
29、gnificant numerals . 13 Table 4 Coding of resistance values with 4 significant numerals 13 Table 5 Coding of resistance values in the three-character code system 14 Table 6 Coding of resistance values in the four-character code system 15 Table 7 Coding of capacitance values with up to 2 significant
30、numerals . 16 Table 8 Fixed length coding of capacitance values with up to 2 significant numerals . 16 Table 9 Coding of capacitance values with 3 significant numerals . 17 Table 10 Coding of capacitance values in the picofarad based three-character code system 17 Table 11 Coding of capacitance valu
31、es in the microfarad based three-character code system 18 Table 12 Letter code for symmetrical relative tolerances . 19 Table 13 Letter code for asymmetrical relative tolerances . 19 Table 14 Letter code for symmetrical absolute tolerances of capacitors . 20 Table 15 Letter code for the dielectric m
32、aterial of plastic film capacitors . 20 Table 16 Letter code for the temperature coefficient of resistance . 21 Table 17 Character code letters for the month 22 Table 18 Code letters for the year in a twenty-year cycle 22 Table 19 Code letters for the year in a ten-year cycle . 23 Table 20 Single-ch
33、aracter code for year and month at a 4-year cycle 25 Table A.1 Coding of the significant numerals of the E96 series . 26 Table A.2 Coding of the multiplier . 27 Table B.1 Cross-reference to Clauses 28 Table B.2 Cross-reference to Tables 29 BS EN 60062:2016BS EN 60062:2016IEC 60062:2016 IEC 2016 5 28
34、303210101111121214151516171818191920212122222324242527282930319XX.1X.2 4 IEC 60062:2016 IEC 2016 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ MARKING CODES FOR RESISTORS AND CAPACITORS FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comp
35、rising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Stan
36、dards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this prep
37、aratory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organi
38、zations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form o
39、f recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretatio
40、n by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regio
41、nal publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out b
42、y independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees f
43、or any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the No
44、rmative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held res
45、ponsible for identifying any or all such patent rights. International Standard IEC 60062 has been prepared by IEC technical committee 40: Capacitors and resistors for electronic equipment. This sixth edition cancels and replaces the fifth edition published in 2004 and constitutes a technical revisio
46、n. This edition includes the following significant technical changes with respect to the previous edition: g120 introduction of the new code colour pink for the coding of the multiplier 10-3; g120 introduction of new subclauses, 3.2 Prescription of code colours, 3.3 Methods for marking resistance va
47、lue and tolerance, 3.4 Methods for TCR marking, for improved clarity, the subjects of colour assignment, coding of R value and tolerance, and coding of TCR is dealt with in separate clauses; g120 inclusion of illustrations for TCR marking by interrupted colour band; g120 inclusion of a new subclause
48、 on a fixed length code marking, fixed length code marking of resistance values with up to 3 significant digits, hence a fixed code length of 4 digits, and BS EN 60062:2016BS EN 60062:2016IEC 60062:2016 IEC 2016 6 IEC 60062:2016 IEC 2016 5 fixed length code marking of capacitance values with up to 2
49、 significant digits, hence a fixed code length of 3 digits; g120 introduction of two new clauses, Clause 6, Coding of properties specific to capacitors and Clause 7, Coding of properties specific to resistors; g120 introduction of Annex A, Special three character coding of resistance value with three significant numerals. The text of this standard is based on the following documents: FDIS Report on voting 40/2465/FDIS 40/2473/RVDFull information on the voting for th
