1、BRITISH STANDARD BS EN 60264-3-5:1999 IEC 60264-3-5: 1999 Packaging of winding wires Part 3-5: Taper barrelled delivery spools Specification for spool containers made from thermoplastic material The European Standard EN 60264-3-5:1999 has the status of a British Standard ICS 55.060BSEN 60264-3-5:199
2、9 This British Standard, having been prepared under the directionof the Electrotechnical Sector Committee, was publishedunder the authority ofthe Standards Committee andcomes into effect on 15October1999 BSI 04-2000 ISBN 0 580 35340 0 National foreword This British Standard is the English language v
3、ersion of EN 60264-3-5:1999. It is identical with IEC 60264-3-5:1999. It supersedes BS EN60264-3-5:1998which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee GEL/55, Winding wires, which has the responsibility to: aid enquirers to understand the text; presen
4、t to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be
5、obtained on request to its secretary. From1January 1997, all IEC publications have the number60000added to the old number. For instance, IEC27-1has been renumbered as IEC 60027-1. For a period of time during the change over from one numbering system to the other, publications may contain identifiers
6、 from both systems. Cross-references Attention is drawn to the fact that CEN and CENELEC Standards normally include an annex which lists normative references to international publications with their corresponding European publications. The British Standards which implement these international or Eur
7、opean publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the nec
8、essary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, theE
9、N title page, pages 2 to 4, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No. Date CommentsBSEN 602
10、64-3-5:1999 BSI 04-2000 i Contents Page National foreword Inside front cover Foreword 2 Text of EN 60264-3-5 3ii blankEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60264-3-5 August 1999 ICS 29.060.10; 55.060 Supersedes EN 60264-3-5:1996 English version Packaging of winding wires Part 3-5: Tap
11、er barrelled delivery spools Specification for spool containers made from thermoplasticmaterial (IEC 60264-3-5:1999) Conditionnement des fils de bobinage Partie 3-5: Bobines de livraison ft de forme conique Spcification pour les conteneurs de bobine faits de matriau thermoplastique (CEI60264-3-5:199
12、9) Verpackung von Wickeldrhten Teil 3-5: Lieferspulen mit konischem Kern Spezificationen fr Behlter aus thermoplastischem Werkstoff (IEC 60264-3-5:1999) This European Standard was approved by CENELEC on 1999-08-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which s
13、tipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Sta
14、ndard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the nati
15、onal electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Eu
16、ropen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1999 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60264-3-5:1999 EEN 60264-3-5:1999
17、 BSI 04-2000 2 Foreword The text of document 55/663/FDIS, future edition2of IEC 60264-3-5, prepared by IEC TC 55, Winding wires, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60264-3-5 on 1999-08-01. This European Standard supersedes EN 60264-3-5:1996. The followin
18、g dates were fixed: Annexes designated “normative” are part of the body of the standard. In this standard, Annex ZA is normative. Annex ZA has been added by CENELEC. Endorsement notice The text of the International Standard IEC 60264-3-5:1999 was approved by CENELEC as a European Standard without an
19、y modification. Contents Page Foreword 2 Introduction 3 1 Scope 3 2 Normative references 3 3 Material 3 4 Type designation 3 5 Requirements 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications Inside back cover Table 1 Mass 3 Table
20、2 Loads 4 Table 3 Load and distance a 4 Table 4 Impact data 4 Table 5 Lifting data 4 latest date by which the ENhas to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2000-05-01 latest date by which the national standards conflicting with the
21、 EN have to be withdrawn (dow) 2002-08-01EN 60264-3-5:1999 BSI 04-2000 3 Introduction This part of IEC60264is one of a series which deals with insulated wires used for windings in electrical equipment. The series comprises three groups describing: methods of test (IEC 60851); specifications (IEC 603
22、17); packaging (IEC 60264). 1 Scope This part of IEC60264specifies the requirements for spool containers made from thermoplastic material and used for taper barrelled delivery spools. 2 Normative references The following normative documents contain provisions which, through reference in this text, c
23、onstitute provisions of this part of IEC 60264. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part of IEC60264are encouraged to investigate the possibility of applying the most recent editions of
24、the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of IEC and ISO maintain registers of currently valid International Standards. IEC 60264-3-4, Packaging of winding wires Part3-4: Taper barrelled delivery spools
25、Basic dimensions of containers for taper barrelled delivery spools 1) . IEC 60264-4-2:1992, Packaging of winding wires Part 4: Methods of test Section 2: Containers made from thermoplastic material for taper barrelled delivery spools. 3 Material The spool containers shall be made from thermoplastic
26、material (for example modified polystyrene) that satisfies the requirements given in this standard. 4 Type designation Spool containers according to this standard shall beidentified by the spool type as specified in IEC60264-3-4, for example: spool container 60264-3-5/IEC 250/400. 5 Requirements For
27、 test methods, see IEC 60264-4-2. 5.1 Surface and markings 5.1.1 Surface The surface of the spool container and the wire take-off opening shall be smooth and free from protruding material. 5.1.2 Markings Each spool container shall have embossed and/or engraved marking, located on the outer surface,
28、containing the following information: a) the type designation of the spool container (forexample 60264-3-5/IEC 250/400); b) name and/or trade mark of the container manufacturer; c) year of manufacture; d) the nominal mass of the spool container in grams. 5.2 Mass The mass of the spool container shal
29、l comply with the values given in Table 1. Table 1 Mass 5.3 Dimensions The spool container dimensions and tolerances shall comply with the dimensions and tolerances given in IEC 60264-3-4. 5.4 Behaviour after high temperature test The spool container dimensions and tolerances shall comply with the d
30、imensions and tolerances given in IEC 60264-3-4. 5.5 Behaviour after moisture test The spool container dimensions and tolerances shall comply with the dimensions and tolerances given in IEC 60264-3-4. 1) To be published. Container for spool type Nominal mass g Tolerance % 200/315 1 400 3 250/400 2 4
31、50 3 315/500 4 750 3 400/630 9 000 3 500/800 15 000 3EN 60264-3-5:1999 4 BSI 04-2000 5.6 Load resistance test 5.6.1 At room temperature The spool container dimensions shall comply with the dimensions and tolerances given in IEC60264-3-4after the application of the load given in Table 2. Table 2 Load
32、s 5.6.2 After elevated temperature The spool container shall be loaded with a load givenin Table 3 and conditioned at a temperature of(70 3) C. The angle ! shall be 30 and the distance a shall be as given in Table 3. The maximum deformations of the dimensions given in IEC60264-3-4shall be agreed upo
33、n between manufacturer and user. Table 3 Load and distance a 5.7 Impact test 5.7.1 At room temperature The function of the spool container shall not be destroyed after testing the container with the values given in Table 4. Table 4 Impact data 5.7.2 At low temperature Under consideration. 5.8 Liftin
34、g capability After testing the container with the mass and the lifting height given in Table 5, the parts of the container shall not become loose or detached. The rope or lifting device, and the means of securing these shall not be broken. Table 5 Lifting data Container for spool type Load kg 200/31
35、5 180 250/400 315 315/500 500 400/630 630 500/800 900 Container for spool type Load kg Distance a mm 200/315 180 1 900 250/400 315 1 800 315/500 500 1 600 400/630 630 1 250 500/800 900 700 Container for spool type Strike heights a Mass of the hammer kg h 1 mm h 2 mm h 3 mm 200/315 315 12,5 250/400 2
36、 350 500 150 12,5 315/500 800 22,5 400/630 1 000 32,5 500/800 1 250 42,5 a See Figure 2 of IEC 60264-4-2. Container for spool type Mass kg Lifting height mm 200/315 25 500 250/400 50 500 315/500 100 500 400/630 200 500EN 60264-3-5:1999 BSI 04-2000 Annex ZA (normative) Normative references to interna
37、tional publications with their corresponding European publications This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated re
38、ferences, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). NOTEWhen an international publi
39、cation has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60264-3-4 1999 Packaging of winding wires Part 3-4: Taper barrelled delivery spools Basic dimensions of containers for taper barrelled deliveryspools EN 60264-3-4 1
40、999 IEC 60264-4-2 1992 Part 4: Methods of test Section 2: Containers made from thermoplastic material for taper barrelled delivery spools EN 60264-4-2 1994BS EN 60264-3-5:1999 IEC 60264-3-5: 1999 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national
41、body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the lates
42、t amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can
43、 be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publica
44、tions should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on standards BSI provi
45、des a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel:0
46、2089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyrig
47、ht subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form o
48、r by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.
