1、BRITISH STANDARD BS EN 60512-11-14:2003 Connectors for electronic equipment Tests and measurements Part 11-14: Climatic tests Test 11p: Flowing single gas corrosion test The European Standard EN 60512-11-14:2003 has the status of a British Standard ICS 31.220.10 BS EN 60512-11-14:2003 This British S
2、tandard was published under the authority of the Standards Policy and Strategy Committee on 14 November 2003 BSI 14 November 2003 ISBN 0 580 42904 0 National foreword This British Standard is the official English language version of EN 60512-11-14:2003. It is identical with IEC 60512-11-14:2003. It
3、supersedes BS EN 60512-11-14:1997 which is withdrawn. The UK participation in its preparation was entrusted by Technical Committee EPL/48, Electromechanical components and mechanical structures for electronic equipment, to Subcommittee EPL/48/2, Connectors for electronic equipment, which has the res
4、ponsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitle
5、d “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance w
6、ith a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related intern
7、ational and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 6, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was
8、last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEAN STANDARD EN 60512-11-14 NORME EUROPENNE EUROPISCHE NORM October 2003 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnisch
9、e Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60512-11-14:2003 E ICS 31.220.10 Supersedes EN 60512-11-14:1997English version Connectors for electronic equ
10、ipment Tests and measurements Part 11-14: Climatic tests Test 11p: Flowing single gas corrosion test (IEC 60512-11-14:2003) Connecteurs pour quipements lectroniques Essais et mesures Partie 11-14: Essais climatiques Essai 11p: Essai de corrosion dans le flux dun gaz (CEI 60512-11-14:2003) Steckverbi
11、nder fr elektronische Einrichtungen Mess- und Prfverfahren Teil 11-14: Klimatische Prfungen - Prfung 11p: Korrosionsprfung mit strmendem Einzelgas (IEC 60512-11-14:2003) This European Standard was approved by CENELEC on 2003-10-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Re
12、gulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
13、This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC mem
14、bers are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Lithuania, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. Foreword The text
15、of document 48B/1349/FDIS, future edition 2 of IEC 60512-11-14, prepared by SC 48B, Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60512-11-14 on 2003-10-01. T
16、his European Standard supersedes EN 60512-11-14:1996. This standard is to be read in conjunction with EN 60512-1:2001 and EN 60512-1-100:2001 which explains the structure of the EN 60512 series. The following dates were fixed: latest date by which the EN has to be implemented at national level by pu
17、blication of an identical national standard or by endorsement (dop) 2004-07-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2006-10-01 Annexes designated “normative“ are part of the body of the standard. In this standard, annex ZA is normative. Annex
18、 ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 60512-11-14:2003 was approved by CENELEC as a European Standard without any modification. _ Page2 EN605121114:2003 CONNECTORS FOR ELECTRONIC EQUIPMENT TESTS AND MEASUREMENTS Part 11-14: Climatic tests Test
19、 11p: Flowing single gas corrosion test 1 Scope and object This part of IEC 60512, when required by the detail specification, is used for testing of connectors for electronic equipment. This test may also be used for similar components when specified in a detail specification. The object of this tes
20、t is to define a standard test method, Test 11p, to assess the effects of controlled corrosion in industrial atmospheres, in a specified concentration of polluted gas(es). 2 Normative references The following referenced documents are indispensable for the application of this document. For dated refe
21、rences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60068-2-42:1982, Environmental testing Part 2: Tests Test Kc: Sulphur dioxide test for contacts and connections IEC 60068-2-43:1976, Environmental tes
22、ting Part 2: Tests Test Kd: Hydrogen sulphide test for contacts and connections IEC 60068-2-49:1983, Environmental testing Part 2: Tests Guidance to Test Kc: Sulphur dioxide test for contacts and connections IEC 60512 (all parts), Connectors for electronic equipment Tests and measurements IEC 60512-
23、1-100, Connectors for electronic equipment Tests and measurements Part 1-100: General Applicable publications IEC 60721-3-3:1994, Classification of environmental conditions Part 3-3: Classification of groups of environmental parameters and their severities Stationary use at weather- protected locati
24、ons 3 Preparation of specimens The specimen shall be prepared and mounted in accordance with the detail specification. When required by the detail specification, the specimen shall be operated the number of times specified prior to the test. For each test carried out, the detail specification shall
25、specify the condition and the severity of the component, for example, operated or non-operated, mated or unmated. NOTE In the case of several specimens, it is recommended to divide the specimens into two groups with different conditions. Page3 EN605121114:20034 Method 4.1 Procedure Test 11p shall be
26、 carried out in accordance with IEC 60068-2-42, Test Kc: Sulphur dioxide test for contacts and connections; IEC 60068-2-43, Test Kd: Hydrogen sulphide test for contacts and connections; IEC 60068-2-49, Guidance to Test Kc: Sulphur dioxide test for contacts and connections. 4.2 Severity of the test T
27、he test severity, to be given in the relevant specification, is defined by type and concentration of polluting gas; temperature; relative humidity; duration of exposure. Table 1 Methods proposed Method Polluting gas Severity 1 aSeverity 2 bA SO 21 max. 10 max. (previous test: Kc) B H 2 S 0,1 max. 1
28、max. (previous test: Kd) NOTE 1 All values in 10 6vol/vol. NOTE 2 For all methods: temperature: 25 C 1 C or 30 C 1 C relative humidity: 75 % 3 %; duration: 4, 10, or 21 days. NOTE 3 Since the nature of aggressivity is different with methods A and B, no comparison between these methods shall be made.
29、 NOTE 4 Other methods may be added in the future after sufficient experience has been gained. NOTE 5 Condensation on the specimens and on the test equipment shall be avoided. aIEC 60721-3-3, class 3C1. b IEC 60721-3-3, class 3C2. 4.3 Final measurements Upon completion of the above test, the specimen
30、s shall be examined in accordance with the following tests, if applicable: test 1a of IEC 60512; tests 2a or 2b of IEC 60512; test 2c of IEC 60512; test 3a of IEC 60512; test 4a of IEC 60512; and with test 13a of IEC 60512, with particular attention to the following details: a) cracking; b) delamina
31、tion; c) pitting of exposed metal surfaces. Page4 EN605121114:20035 Details to be specified When this test is required by the detail specification, the following details shall be specified: a) method of preparation and mounting of the specimens; b) conditioning of the specimens prior to the test (if
32、 required); c) severity, type, concentration and temperature of polluting gas; d) initial measurements; e) requirements; f) duration of exposure; g) final measurements; h) any deviation from the standard test method. _ Page5 EN605121114:2003 Annex ZA (normative) Normative references to international
33、 publications with their corresponding European publications This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated referenc
34、es, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). NOTE When an international publicatio
35、n has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60068-2-42 1982 Environmental testing Part 2: Tests - Test Kc: Sulphur dioxide test for contacts and connections - - IEC 60068-2-43 1976 Part 2: Tests - Test Kd: Hydroge
36、n sulphide test for contacts and connections - - IEC 60068-2-49 1983 Part 2: Tests - Guidance to Test Kc: Sulphur dioxide test for contacts and connections - - IEC 60512 Series Connectors for electronic equipment - Tests and measurements EN 60512 Series IEC 60512-1-100 - 1)Connectors for electronic
37、equipment - Tests and measurements Part 1-100: General - Applicable publications EN 60512-1-100 2001 2)IEC 60721-3-3 1994 Classification of environmental conditions Part 3: Classification of groups of environmental parameters and their severities Section 3: Stationary use at weatherprotected locatio
38、ns EN 60721-3-3 1995 1)Undated reference. 2)Valid edition at date of issue. Page6 EN605121114:2003blankBS EN 60512-11-14:2003 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the U
39、K view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to impro
40、ve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000.
41、Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Service
42、s. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards,
43、unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all it
44、s products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and othe
45、r benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website
46、at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval
47、 system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.
