1、BRITISH STANDARD BS EN 60512-4-3:2002 Connectors for electronic equipment Tests and measurements Part 4-3: Voltage stress tests Test 4c: Voltage proof of pre-insulated crimp barrels The European Standard EN 60512-4-3:2002 has the status of a British Standard ICS 31.220.10 NO COPYING WITHOUT BSI PERM
2、ISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBS EN 60512-4-3:2002 This British Standard, having been prepared under the direction of the Electrotechnical Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 31 May 2002 BSI 31 May 200
3、2 ISBN 0 580 39756 4 National foreword This British Standard is the official English language version of EN 60512-4-3:2002. It is identical with IEC 60512-4-3:2002. The UK participation in its preparation was entrusted by Technical Committee EPL/48, Electromechanical components and mechanical struct
4、ures for electronic equipment, to Subcommittee EPL/48/2, Connectors for electronic equipment, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. From 1 January 1997, all IEC publications have the number 60000 added t
5、o the old number. For instance, IEC 27-1 has been renumbered as IEC 60027-1. For a period of time during the change over from one numbering system to the other, publications may contain identifiers from both systems. Cross-references The British Standards which implement international or European pu
6、blications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary p
7、rovisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enqui
8、ries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 4, an inside ba
9、ck cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEAN STANDARD EN 60512-4-3 NORME EUROPENNE EUROPISCHE NORM April 2002 CENELEC European Committee for Electrotechnica
10、l Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 605
11、12-4-3:2002 E ICS 31.220.10 English version Connectors for electronic equipment - Tests and measurements Part 4-3: Voltage stress tests - Test 4c: Voltage proof of pre-insulated crimp barrels (IEC 60512-4-3:2002) Connecteurs pour quipements lectroniques - Essais et mesures Partie 4-3: Essais de cont
12、rainte dilectrique - Essai 4c: Tension de tenue pour fts prisols de sertissage (CEI 60512-4-3:2002) Steckverbinder fr elektronische Einrichtungen - Mess- und Prfverfahren Teil 4-3: Prfungen mit Spannungsbeanspruchung - Prfung 4c: Spannungsfestigkeit vorisolierter Crimphlsen (IEC 60512-4-3:2002) This
13、 European Standard was approved by CENELEC on 2002-04-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical refe
14、rences concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC
15、member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta,
16、Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EN 60512-4-3:2002 - 2 - Foreword The text of document 48B/1135/FDIS, future edition 1 of IEC 60512-4-3, prepared by SC 48B, Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic equ
17、ipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60512-4-3 on 2002-04-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2003-01-01 la
18、test date by which the national standards conflicting with the EN have to be withdrawn (dow) 2005-04-01 _ Endorsement notice The text of the International Standard IEC 60512-4-3:2002 was approved by CENELEC as a European Standard without any modification. _ Page2 EN6051243:200260512-4-3 IEC:2002 3 C
19、ONNECTORS FOR ELECTRONIC EQUIPMENT TESTS AND MEASUREMENTS Part 4-3: Voltage stress tests Test 4c: Voltage proof of pre-insulated crimp barrels 1 Scope and object This part of IEC 60512, when required by the detail specification, is used for testing electromechanical components within the scope of IE
20、C technical committee 48. This test may also be used for similar devices when specified in a detail specification. The object of this test is to detail a standard method to determine the ability of pre-insulated crimp barrels to withstand the crimp operation without damage to the insulation. 2 Prepa
21、ration of the specimen The specimen shall consist of a crimp contact or a terminal end having a pre-insulated crimp barrel and the appropriate cable/wire and shall be prepared in accordance with the detail specification. The cable/wire, stripped as specified, shall be fitted to the crimp barrel and
22、then crimped in the normal manner. The conductive area of the contact/terminal end and the end of the conductor to which it is attached shall be sealed, for example by beeswax or other suitable sealing compound, ensuring that the sealing used does not cover the area of the contact deformed by the cr
23、imping tool. 3 Test method The end of the specimen with the contact/terminal end shall be immersed in a 5 % aqueous sodium chloride solution to a depth such as will cover the crimp indentations, but will not immerse the open end. A voltage shall be applied between the specimen and an immersed electr
24、ode placed at a distance not more than 50 mm from the specimen. The voltage shall be steadily increased at a rate not exceeding 500 V/s up to the proof voltage specified in the detail specification and kept at this value for 60 s 5 s. 4 Requirement There shall be no breakdown. Page3 EN6051243:200206
25、5-21-43 EI:C0022 4 5 Details to be specified When this test is required by the detail specification, the following details shall be specified: a) preparation of the specimen; b) cable/wire to be used; c) type and die setting of crimping tool; d) proof voltage; e) any deviation from the standard test
26、 method. _ Page4 EN6051243:2002blankBS EN 60512-4-3:2002 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is i
27、ncorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if
28、anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating s
29、ervice called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersb
30、si-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a w
31、ide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)
32、20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 700
33、2. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publicatio
34、ns. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photoc
35、opying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.
