1、BRITISH STANDARD BS EN 60512-6-4:2002 Connectors for electronic equipment Tests and measurements Part 6-4: Dynamic stress tests Test 6d: Vibration (sinusoidal) The European Standard EN 60512-6-4:2002 has the status of a British Standard ICS 31.220.10 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMI
2、TTED BY COPYRIGHT LAWBS EN 60512-6-4:2002 This British Standard, having been prepared under the direction of the Electrotechnical Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 24 May 2002 BSI 24 May 2002 ISBN 0 580 39702 5 N
3、ational foreword This British Standard is the official English language version of EN 60512-6-4:2002. It is identical with IEC 60512-6-4:2002. The UK participation in its preparation was entrusted by Technical Committee EPL/48, Electromechanical components and mechanical structures for electronic eq
4、uipment, to Subcommittee EPL/48/2, Connectors for electronic equipment, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. From 1 January 1997, all IEC publications have the number 60000 added to the old number. For
5、instance, IEC 27-1 has been renumbered as IEC 60027-1. For a period of time during the change over from one numbering system to the other, publications may contain identifiers from both systems. Cross-references The British Standards which implement international or European publications referred to
6、 in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contrac
7、t. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpreta
8、tion, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 6, an inside back cover and a back co
9、ver. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEAN STANDARD EN 60512-6-4 NORME EUROPENNE EUROPISCHE NORM April 2002 CENELEC European Committee for Electrotechnical Standardization Comi
10、t Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60512-6-4:2002 E ICS 31.2
11、20.10 English version Connectors for electronic equipment - Tests and measurements Part 6-4: Dynamic stress tests - Test 6d: Vibration (sinusoidal) (IEC 60512-6-4:2002) Connecteurs pour quipements lectroniques - Essais et mesures Partie 6-4: Essais de contraintes dynamiques - Essai 6d: Vibrations (s
12、inusodales) (CEI 60512-6-4:2002) Steckverbinder fr elektronische Einrichtungen - Mess- und Prfverfahren Teil 6-4: Prfungen mit dynamisch- mechanischer Beanspruchung - Prfung 6d: Schwingen (sinusfrmig) (IEC 60512-6-4:2002) This European Standard was approved by CENELEC on 2002-04-01. CENELEC members
13、are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application t
14、o the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has t
15、he same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingd
16、om.NE 065-21-6:42002 - 2 - Foreword The text of document 48B/1141/FDIS, future edition 1 of IEC 60512-6-4, prepared by SC 48B, Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by
17、 CENELEC as EN 60512-6-4 on 2002-04-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2003-01-01 latest date by which the national standards conflicting with the EN have to
18、be withdrawn (dow) 2005-04-01 Annexes designated “normative“ are part of the body of the standard. In this standard, annex ZA is normative. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 60512-6-4:2002 was approved by CENELEC as a European Standar
19、d without any modification. _ Page2 EN6051264:2002 BSI24May2002065-21-64 EI:C0022 3 CONNECTORS FOR ELECTRONIC EQUIPMENT TESTS AND MEASUREMENTS Part 6-4: Dynamic stress tests Test 6d: Vibration (sinusoidal) 1 General 1.1 Scope and object This part of IEC 60512, when required by the detail specificati
20、on, is used for testing electromechanical components within the scope of IEC technical committee 48. This test may also be used for similar devices when specified in a detail specification. The object of this test is to define a standard test method to assess the ability of components to withstand s
21、pecified severities of sinusoidal vibration. 1.2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of IEC 60512. For dated references, subsequent amend- ments to, or revisions of, any of these publicati
22、ons do not apply. However, parties to agreements based on this part of IEC 60512 are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Me
23、mbers of IEC and ISO maintain registers of currently valid International Standards. IEC 60068-2-6:1995, Environmental testing Part 2: Tests Test Fc: Vibration (sinusoidal) IEC 60512-1-1, Connectors for electronic equipment Tests and measurements Part 1-1: General examination Test 1a: Visual examinat
24、ion IEC 60512-2-1, Connectors for electronic equipment Tests and measurements Part 2-1: Electrical continuity and contact resistance tests Test 2a: Contact resistance Millivolt level method IEC 60512-2-5, Connectors for electronic equipment Tests and measurements Part 2-5: Electrical continuity and
25、contact resistance tests Test 2e: Contact disturbance IEC 60512-7:1993, Connectors for electronic equipment Tests and measurements Part 7: Sealing tests 2 Preparation of the specimen Specimens shall be equipped with their normal accessories, mounted and wired as specified in the detail specification
26、. Page3 EN6051264:2002 BSI24May2002065-21-64 EI:C0022 4 Specimens shall be tested in a manner such that all mechanical features, such as panel-mounting arrangements, locking and retaining devices, are fully utilized. Details of the monitoring circuit, including the method and attachment points of se
27、nsors on the specimen shall be specified. A minimum of 200 mm of wire or cable shall be unsupported on both ends of the specimen, unless otherwise specified in the detail specification. The wire or cable shall be secured to the vibration fixture bottom plate (or similar location). 3 Test method This
28、 test shall be carried out in accordance with IEC 60068-2-6, Test Fc: Vibration (sinusoidal), using the degree of severity specified in the detail specification. 4 Test conditions The specimens shall be vibrated in each of three mutually perpendicular directions, one of which shall be parallel to th
29、e engagement direction. The vibration magnitude shall be monitored (for controlling the generator) at locations as near as possible to the specimen mounting points. The environment temperature, if other than ambient, shall be specified. 5 Measurements 5.1 Initial measurements shall be carried out as
30、 specified by the detail specification. 5.2 Measurements during the test Unless otherwise specified by the detail specification, monitoring of electrical continuity shall be carried out according to IEC 60512-2-5, Test 2e: Contact disturbance. The contacts and screen shall be connected in series as
31、specified in the detail specification when monitoring continuity. The electrical load condition shall be 100 mA for all contacts unless otherwise specified. The limit of duration of contact disturbance shall be specified in the detail specification. 5.3 Final measurements The specimen shall be elect
32、rically and mechanically checked by the following tests, unless otherwise specified in the detail specification. Visual examination: IEC 60512-1-1, Test 1a. The specimen shall be visually examined without dismantling. There shall be no loosening, displacement of parts or mechanical damage such as to
33、 impair operation. Contact resistance Millivolt level method: IEC 60512-2-1, Test 2a. Page4 EN6051264:2002 BSI24May2002065-21-64 EI:C0022 5 The contact resistance or change in contact resistance shall not exceed the maximum value specified. Sealing (if applicable): IEC 60512-7, Test 14b or other sea
34、ling tests as specified in the detail specification. The leakage rate across all seals, including panel seals, shall be not greater than specified in the detail specification. Operational check The mechanical operational characteristics shall be checked according to the detail specification. 6 Detai
35、ls to be specified When this test is required by the detail specification, the following details shall be specified: a) method of mounting the specimen and associated cable(s)/wire bundle, including the unsupported length of cable from contact to first clamp; b) test severity (frequency range, displ
36、acement amplitude, acceleration level, duration); c) limit of duration of contact disturbance; d) contact resistance, maximum value; e) maximum leakage rate; f) operational characteristics to be checked; g) any deviation from the standard test method. _ Page5 EN6051264:2002 BSI24May2002- 3 - EN 065-
37、21-6:42002 Annex ZA (normative) Normative references to international publications with their corresponding European publications This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in t
38、he text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to
39、applies (including amendments). NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60068-2-6 + corr. March 1995 1995 Environmental testing Part 2: Tests - Test Fc: Vibration (sinusoid
40、al) EN 60068-2-6 1995 IEC 60512-1-1 - 1) Connectors for electronic equipment - Tests and measurements Part 1-1: General examination - Test 1a: Visual examination EN 60512-1-1 2002 2) IEC 60512-2-1 - 1) Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Milli
41、volt level method EN 60512-2-1 2002 2) IEC 60512-2-5 - 3) Part 2-5: Electrical continuity and contact resistance tests - Test 2e: Contact disturbance - IEC 60512-7 1993 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods Part 7: Mechanical operating
42、 tests and sealing tests -1)Undated reference. 2)Valid edition at date of issue. 3)In preparation. Page6 EN6051264:2002 BSI24May2002BS EN 60512-6-4:2002 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British S
43、tandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the c
44、onstant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover.
45、 Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be ad
46、dressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been publi
47、shed as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available w
48、hich give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. Fo
49、r details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyr
