1、BRITISH STANDARD BS EN 60603-13:1998 IEC 60603-13: 1995 Connectors for frequencies below3MHz for use with printed boards Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of2,54mm(0,1 in) with free connectors for non-accessible insulation di
2、splacement terminations (ID) The European Standard EN60603-13:1998 has the status of a British Standard ICS 31.220.10BSEN60603-13:1998 This British Standard, having been prepared under the directionof the Electrotechnical Sector Board, was published underthe authority of the Standards Board and come
3、s into effect on 15 May1998 BSI 04-1999 ISBN 0 580 29293 2 National foreword This British Standard is the English language version of EN60603-13:1998. It is identical with IEC60603-13:1995. The UK participation in its preparation was entrusted by Technical Committee EPL/48, Electromechanical compone
4、nts for electronic equipment, to Subcommittee EPL/48/2, Connectors for electronic equipment, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the U
5、K interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this subcommittee can be obtained on request to its secretary. From1 January1997, all IEC publications have the number60000 added to the old number. For
6、 instance, IEC27-1 has been renumbered as IEC60027-1. For a period of time during the change over from one numbering system to the other, publications may contain identifiers from both systems. Cross-references Attention is drawn to the fact that CEN and CENELEC Standards normally include an annex w
7、hich lists normative references to international publications with their corresponding European publications. The British Standards which implement these international or European publications may be found in the BSI Standards Catalogue under the section entitled “International Standards Corresponde
8、nce Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of i
9、tself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, theEN title page, pages 2 to 39 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be in
10、dicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No. Date CommentsBSEN60603-13:1998 BSI 04-1999 i Contents Page National foreword Inside front cover Foreword 2 Text of EN 60603-13 5ii blankEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60603-13
11、 February1998 ICS 31.220.10 Descriptors: Electronic components, electric connectors, printed-circuit cards, designation, detail specifications, electric properties, dimensions, mechanical properties, conformity tests, quality assurance, quality control, routine verification English version Connector
12、s for frequencies below3MHz for use with printed boards Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of2,54mm (0,1 in), with free connectors for non-accessible insulation displacement terminations (ID) (IEC 60603-13:1995) Connecteurs po
13、ur frquences infrieures 3MHz pour utilisation avec cartes imprimes Partie 13: Spcification particulire pour connecteurs en deux parties, sous assurance de la qualit pour cartes imprimes pour grille de base de 2,54mm (0,1 in), avec fiches pour bornes de sortienon-accessibles dplacement (CAD) (CEI6060
14、3-13:1995) Steckverbinder fr gedruckte Schaltungen fr Frequenzen unter3MHz Teil 13: Bauartspezifikation fr gtebesttigte indirekte Steckverbinder fr gedruckte Schaltungen mit Raster2,54mm (0,1 in), mit freiem Steckverbinder fr Schneidklemmenanschlu (ID) (IEC 60603-1 3:1995) This European Standard was
15、 approved by CENELEC on1998-01-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such
16、national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own lan
17、guage and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal,
18、 Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1998 CENELEC All rights of exploit
19、ation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN60603-13:1998 EEN60603-13:1998 BSI 04-1999 2 Foreword The text of the International Standard IEC60603-13:1995, prepared by SC48B, Connectors, of IEC TC48, Electromechanical components and mechanical structures for
20、electronic equipment, was submitted to the formal vote and was approved by CENELEC as EN60603-13 on1998-01-01 without any modification. The following dates were fixed: Annexes designated “normative” are part of the body of the standard. In this standard, Annex A and Annex ZA are normative. Annexes Z
21、A has been added by CENELEC. Endorsement notice The text of the International Standard IEC60603-13:1995 was approved by CENELEC as a European Standard without any modification. Contents Page 1 Scope 5 2 Normative references 5 3 IEC type designation 6 4 Common features 7 4.1 Isometric view 7 4.2 Surv
22、ey of styles 7 5 Dimensions 8 5.1 General 8 5.2 Fixed connectors 8 5.3 Free connectors 13 5.4 Mounting information for fixed connectors, styles A and B 16 6 Gauges 18 7 Characteristics 19 7.1 Climatic category 19 7.2 Electrical characteristics 19 7.3 Machanical characteristics 20 8 Test schedule 22
23、8.1 General 22 9 Quality assessment procedures 33 9.1 Qualification approval testing 33 9.2 Quality conformance inspection 34 9.3 Delayed delivery, re-inspection 34 10 Ordering information 34 Annex A (normative) Test phase BP3.2: Corrosion,industrial atmosphere 37 Annex ZA (normative) Normative refe
24、rences to international publications with their corresponding European publications 38 Figure 1 Isometric view 7 Figure 2 Fixed connector, marking 8 Figure 3 Fixed connector, dimensions 9 Figure 4 Fixed connector, details A and B 10 Figure 5 Fixed connectors, latches 12 Figure 6 Free connectors, dim
25、ensions 13 Figure 7 Free connectors, strain relief information 14 Figure 8 Fixed connectors, mounting information 16 Figure 9 Fixed connectors, mounting information 16 Figure 10 Fixed connectors, mounting information 17 latest date by which the EN has to be implemented at national level by publicati
26、on of an identical national standard or by endorsement (dop)1998-12-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow)1998-12-01EN60603-13:1998 BSI 04-1999 3 Page Figure 11 Fixed connectors, mounting information 17 Figure 12 Gauge dimensions 18 Figure 1
27、3 Derating curves 20 Figure 14 Connection points for measuring contact resistance 22 Figure 15 Test arrangement,90 23 Figure 16 Test arrangement, straight 23 Figure 17 Fixed connector arrangement 24 Figure 18 Free connector arrangement 24 Figure 19 Wiring arrangement 24 Figure 20 Cable pull, force d
28、irection 25 Figure 21 Coupling device test, force direction 25 Table 1 Survey of styles 7 Table 2 Fixed connectors, dimensions 11 Table 3 Fixed connectors, terminations 11 Table 4 Free connectors, dimensions 15 Table 5 Fixed connectors, mounting dimensions 18 Table 6 Gauge information 19 Table 7 Cli
29、matic categories 19 Table 8 Clearance and creepage information 19 Table 9 Insertion and withdrawal forces 21 Table 10 Vibration levels 21 Table 11 Shock levels 21 Table 12 Acceleration levels 21 Table 13 Mechanical operations 22 Table 14 Test group information 22 Table 15 Qualification approval grou
30、p information 33 Table 16 Lot-by-lot tests 34 Table 17 Periodic tests inspection groups 35 Table 18 Delayed delivery, re-inspection 364 blankEN60603-13:1998 BSI 04-1999 5 1 Scope This part of IEC603 covers a range of two-part connectors with contact arrangements having spacings of2,54mm (0,1 in) in
31、both directions. The two-part connector range comprises a fixed (board-mounted) connector containing male contacts and a free connector containing female contacts. They are primarily intended to provide interconnection between printed boards using a basic grid of2,54mm (0,1 in) as laid down in IEC97
32、 and round conductor ribbon cable on1,27mm (0,05 in) centreline spacing. The fixed connectors are provided with posts either for solder, press-in or wrapped connections. The free connectors are provided with non-accessible insulation displacement terminations. 2 Normative references The following no
33、rmative documents contain provisions which, through reference in this text, constitute provisions of this part of IEC603. At the time of publication, the editions indicated were valid. All normative documents are subject to revision, and parties to agreements based on this part of IEC603 are encoura
34、ged to investigate the possibility of applying the most recent editions of the normative documents indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. IEC68-1:1988, Environmental testing Part 1: General and guidance. Amendment No.1 (1992) IEC68-2-60
35、:1990, Environmental testing Part 2: Tests Test Ke: Corrosion tests in artificial atmosphere at very low concentration of polluting gas(es). IEC97:1991, Grid systems for printed circuits. IEC352-1:1983, Solderless connections Part 1: Solderless wrapped connections General requirements, test methods
36、and practical guidance. IEC352-4:1994, Solderless connections Part 4: Solderless non-accessible insulation displacement connections General requirements, test methods and practical guidance. IEC352-5:1995, Solderless connections Part 5: Solderless press-in connections General requirements, test meth
37、ods and practical guidance. IEC410:1973, Sampling plans and procedures for inspection by attributes. IEC512-1:1984, Electromechanical components for electronic equipment; basic testing procedures and measuring methods Part 1: General. Amendment No. 1 (1988) IEC512-2:1985, Electromechanical component
38、s for electronic equipment; basic testing procedures and measuring methods Part 2: General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests. IEC512-3:1976, Electromechanical components for electronic equipment; basic testing procedures and me
39、asuring methods Part 3: Current-carrying capacity tests. IEC512-4:1976, Electromechanical components for electronic equipment; basic testing procedures and measuring methods Part 4: Dynamic stress tests. IEC512-5:1992, Electromechanical components for electronic equipment; basic testing procedures a
40、nd measuring methods Part 5: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests. IEC512-7:1993, Electromechanical components for electronic equipment; basic testing procedures and measuring methods Part 7: Mechanical operating tests and sealing t
41、ests. IEC512-8:1993, Electromechanical components for electronic equipment; basic testing procedures and measuring methods Part 8: Connector tests (mechanical) and mechanical tests on contacts and terminations. IEC512-9:1992, Electromechanical components for electronic equipment; basic testing proce
42、dures and measuring methods Part 9: Miscellaneous tests. IEC603-1:1991, Connectors for frequencies below3MHz for use with printed boards Part 1: Generic specification General requirements and guide for the preparation of detail specifications, with assessed quality. Amendment No. 1 (1992) IEC QC0010
43、02:1986, Rules of procedure of the IEC quality assessment system for electronic components (IECQ). Amendment No. 1 (1992)EN60603-13:1998 6 BSI 04-1999 ISO272:1982, Fastener hexagon products Width across flats. ISO468:1982, Surface roughnessParameters, their values and general rules for specifying re
44、quirements. 3 IEC type designation Connectors, fixed (board-mounted) and free, with and without strain reliefs and latches according to this standard shall be designated by the following system. NOTE“L” stands for letter “N” stands for numberEN60603-13:1998 BSI 04-1999 7 Example Connector style B, h
45、aving20male contacts gold-finished with solder terminations. Complete fixed connector for boards up to3,2mm (0,126 in), straight termination without latches, with performance level2 and assessment level G: IEC603-13-B020MS-4C1A-2G. 4 Common features Not applicable. 4.1 Isometric view 4.2 Survey of s
46、tyles Table 1 Survey of styles Figure 1 Isometric view Style Number of contacts 4/6/8 10/12/14 16/20/24/26/30/34/36 40/44/50/52/56/60/64 A Fixed connector; press-in/solder/wrap post Without lateral polarization keys B Fixed connector; press-in/solder/wrap post Without lateral polarization keys With
47、one lateral polarization key With two lateral polarization keys C Free connector; insulation displacement termination Without lateral polarization slots With one lateral polarization slot With two lateral polarization slots NOTEStyle C (free connector) can be mated either with style A or style B (fi
48、xed connectors).EN60603-13:1998 8 BSI 04-1999 5 Dimensions 5.1 General Dimensions in millimetres are the original dimensions. 1) Drawings are shown in third-angle projection. The shape of the connectors may deviate from those given in the following drawings as long as the specified dimensions are no
49、t influenced. 5.2 Fixed connectors 5.2.1 Fixed connector, style A (central polarization slot only) Same as style B, but without the lateral polarization keys. 5.2.1.1 Dimensions See Figure 3. 5.2.1.2 Terminations See Table 3. 1) The inch dimensions of this detail specification are based on a German national standard and are calculated by mathematic conversion. Differences of dimensions, if any, are caused by double
