BS EN 60622-2003 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-cadmium prismatic rechargeable single cells《含碱性或其它非酸性电解液的蓄电池和蓄电池组 .pdf

上传人:hopesteam270 文档编号:576025 上传时间:2018-12-13 格式:PDF 页数:24 大小:425.87KB
下载 相关 举报
BS EN 60622-2003 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-cadmium prismatic rechargeable single cells《含碱性或其它非酸性电解液的蓄电池和蓄电池组 .pdf_第1页
第1页 / 共24页
BS EN 60622-2003 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-cadmium prismatic rechargeable single cells《含碱性或其它非酸性电解液的蓄电池和蓄电池组 .pdf_第2页
第2页 / 共24页
BS EN 60622-2003 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-cadmium prismatic rechargeable single cells《含碱性或其它非酸性电解液的蓄电池和蓄电池组 .pdf_第3页
第3页 / 共24页
BS EN 60622-2003 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-cadmium prismatic rechargeable single cells《含碱性或其它非酸性电解液的蓄电池和蓄电池组 .pdf_第4页
第4页 / 共24页
BS EN 60622-2003 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-cadmium prismatic rechargeable single cells《含碱性或其它非酸性电解液的蓄电池和蓄电池组 .pdf_第5页
第5页 / 共24页
亲,该文档总共24页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述

1、BRITISH STANDARD BS EN 60622:2003 Secondary cells and batteries containing alkaline or other non-acid electrolytes Sealed nickel-cadmium prismatic rechargeable single cells The European Standard EN 60622:2003 has the status of a British Standard ICS 29.220.30 BS EN 60622:2003 This British Standard w

2、as published under the authority of the Standards Policy and Strategy Committee on 4 September 2003 BSI 4 September 2003 ISBN 0 580 42547 9 National foreword This British Standard is the official English language version of EN 60622:2003. It is identical with IEC 60622:2002. It supersedes BS EN 6062

3、2:1996 which will be withdrawn on 2005-12-01. The UK participation in its preparation was entrusted to Technical Committee PEL/21/1, Secondary cells and batteries containing alkaline and other non-acidic electrolytes, which has the responsibility to: A list of organizations represented on this commi

4、ttee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “S

5、earch” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal

6、 obligations. aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages

7、This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 20, an inside back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEAN S

8、TANDARD EN 60622 NORME EUROPENNE EUROPISCHE NORM January 2003 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2003 CENELEC - All

9、 rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60622:2003 E ICS 29.220.30 Supersedes EN 60622:1995English version Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-cadmium prismatic rechargeable

10、single cells (IEC 60622:2002) Accumulateurs alcalins et autres accumulateurs lectrolyte non acide - Elments individuels paralllpipdiques rechargeables tanches au nickel- cadmium (CEI 60622:2002) Akkumulatoren und Batterien mit alkalischem oder anderen nichtsurehaltigen Elektrolyten - Gasdichte wiede

11、raufladbare prismatische Nickel-Cadmium-Einzelzellen (IEC 60622:2002) This European Standard was approved by CENELEC on 2002-12-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national

12、standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any

13、 other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finl

14、and, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. Foreword The text of document 21A/362/FDIS, future edition 3 of IEC 60622, prepared by SC 21A, Secondary cells and batteries cont

15、aining alkaline or other non-acid electrolytes, of IEC TC 21, Secondary cells and batteries, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60622 on 2002-12-01. This European Standard supersedes EN 60622:1995. The following dates were fixed: latest date by which the

16、 EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2003-09-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2005-12-01 Annexes designated “normative“ are part of the body of the standar

17、d. In this standard, annex ZA is normative. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 60622:2002 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be

18、added for the standard indicated: IEC 61434 NOTE Harmonized as EN 61434:1996 (not modified). _ Page2 EN60622:200360622 IEC:2002 3 CONTENTS 1 General5 1.1 Scope5 1.2 Normative references5 1.3 Terms and definitions 6 1.4 Parameter measurement tolerances6 2 Designation and marking7 2.1 Cell designation

19、7 2.2 Cell termination.7 2.3 Marking.7 2.4 Safety recommendations.7 3 Dimensions8 4 Electrical tests10 4.1 Charging procedure for test purposes10 4.2 Discharge performance.10 4.2.1 Discharge performance at 20 C10 4.2.2 Discharge performance at +5 C11 4.2.3 Discharge performance at 18 C12 4.2.4 High

20、rate current test.12 4.3 Charge retention.13 4.4 Endurance.13 4.4.1 Endurance in cycles 13 4.4.2 Permanent charge endurance14 4.5 Charge acceptance at constant voltage.15 4.6 Overcharge.15 4.7 Safety device operation.15 4.8 Gas leakage test .16 4.9 Storage.16 5 Mechanical tests.16 6 Physical appeara

21、nce16 Page3 EN60622:200360622 IEC:2002 4 7 Conditions for approval and acceptance .17 7.1 Type approval.17 7.2 Batch acceptance17 Annex ZA (normative) Normative references to international publications with their .19 Bibliography20 Page4 EN60622:200360622 IEC:2002 5 SECONDARY CELLS AND BATTERIES CON

22、TAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES SEALED NICKEL-CADMIUM PRISMATIC RECHARGEABLE SINGLE CELLS 1 General 1.1 Scope This International standard specifies marking, tests and requirements for sealed nickel- cadmium prismatic secondary single cells. NOTE In this context “prismatic” refers to

23、cells having rectangular sides and bases. Where there exists an IEC standard specifying test conditions and requirements for cells used in special applications and which is in conflict with this standard, the former takes precedence. 1.2 Normative references The following referenced documents are in

24、dispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60050-486, International Electrotechnical Vocabulary Chapter 486: Secondary cells and

25、batteries. IEC 60051 (all parts), Direct acting indicating analogue electrical measuring instruments and their accessories IEC 60410, Sampling plans and procedures for inspection by attributes IEC 60417 (all parts), Graphical symbols for use on equipment. IEC 60485, Digital electronic d.c. voltmeter

26、s and d.c. electronic analogue-to-digital converters IEC 61438, Possible safety and health hazards in the use of alkaline secondary cells and batteries Guide to equipment manufacturers and users. Page5 EN60622:200360622 IEC:2002 6 1.3 Terms and definitions For the purpose of this International Stand

27、ard, the definitions contained in IEC 60050-486 and the following apply. 1.3.1 sealed cell cell which remains closed and does not release either gas or liquid when operated within the limits of charge and temperature specified by the manufacturer. The cell is equipped with a safety device to prevent

28、 dangerously high internal pressure. The cell does not require addition to the electrolyte and is designed to operate during its life in its original sealed state 1.3.2 nominal voltage the nominal voltage of a sealed nickel-cadmium rechargeable single cell is 1,2 V 1.3.3 rated capacity quantity of e

29、lectricity C 5Ah (ampere-hours) declared by the manufacturer which a single cell can deliver when discharged at the reference test current of 0,2 I tA to a final voltage of 1,0 V at +20 C after charging, storing and discharging under the conditions specified in clause 4 1.4 Parameter measurement tol

30、erances The overall accuracy of controlled or measured values, relative to the specified or actual values, shall be within these tolerances: a) 1 % for voltage; b) 1 % for current; c) 2 C for temperature; d) 0,1 % for time; e) 1 % for capacity. These tolerances comprise the combined accuracy of the

31、measuring instruments, the measurement techniques used, and all other sources of error in the test procedure. For assistance in selecting instrumentation see IEC 60051 for analogue instruments and IEC 60485 for digital instruments. The details of the instrumentation used shall be provided in any rep

32、ort of results. Page6 EN60622:200360622 IEC:2002 7 2 Designation and marking 2.1 Cell designation Sealed nickel-cadmium prismatic secondary single cells shall be designated by the letters “KC” followed by a third letter L, M, H or X which signifies: low rate of discharge (L); medium rate of discharg

33、e (M); high rate of discharge (H); very high rate of discharge (X). NOTE These types of cells are typically but not exclusively used for the following discharge rates L up to 0,5 I tA, M up to 3,5 I tA, H up to 7,0 I tA, X up to and above 7,0 I tA. This group of three letters shall be followed by a

34、group of figures indicative of the rated capacity of the cell in ampere-hours. Example: KCH15. 2.2 Cell termination This standard does not specify cell termination. 2.3 Marking Each cell shall carry durable markings giving the following minimum information: designation as specified in 2.1, (in addit

35、ion, it is permissible for a manufacturer to use his own type designation); name or identification of manufacturer or supplier; positive terminal: either a red washer or an indented or raised symbol, (see graphical symbol 5005 of IEC 60417). 2.4 Safety recommendations The manufacturer shall provide

36、recommendations for the safe handling of the cell. See also IEC 61438. Page7 EN60622:200360622 IEC:2002 8 3 Dimensions Dimensions of cells, shown in Figure 1, are given in Table 1. h bd IEC 2377/02NOTE Cells may also have four or more terminals. Figure 1 Example of a sealed prismatic cell with two t

37、erminals Page8 EN60622:200360622 IEC:2002 9 Table 1 Dimensions for unjacketed sealed nickel-cadmium prismatic cells Width, b mm Length, d mm Height, h mm 31 47 129 36 15 71 37 31 64 42 17 100 42 39 102 50 35 129 51 30 111 51 37 111 64 63 84 77 31 117 77 31 126 77 31 222 77 43 222 77 63 222 77 81 222

38、 77 121 222 93 84 126 97 19 107 NOTE 1 The dimensions given in Table 1 represent preferred values. NOTE 2 The values for widths and lengths given in Table 1 are maximum values; their negative tolerances are given in Table 2. NOTE 3 The values for height given in Table 1 relate to the maximum height

39、over the terminals or the closed cell vent whichever is the greater. No lower limits are stated. NOTE 4 The dimensions shown in Table 1 are not associated to particular cell capacities. They apply to all kinds of sealed nickel-cadmium prismatic cells, i.e. L, M, H and X types. Table 2 Measurement to

40、lerances in millimetres (valid for widths and lengths) Up to and including 60 mm 0 to 2 Above 60 mm up to and including 120 mm 0 to 3 Above 120 mm 0 to 4 Page9 EN60622:200360622 IEC:2002 10 4 Electrical tests Charge and discharge currents for the tests in accordance with 4.1 to 4.8 inclusive shall b

41、e based on the value of the rated capacity. In all tests, with the exception of that specified in 4.7, the cells shall be placed in conditions such that their large lateral sides cannot be deformed under the effect of internal pressure. 4.1 Charging procedure for test purposes Prior to charging, the

42、 cells shall have been discharged at 20 C 5 C, at a constant current of 0,2 I tA, down to a final voltage of 1,0 V. Unless otherwise specified in this standard, the charge, preceding the various discharge tests scheduled, shall be carried out in an ambient temperature of 20 C 5 C and at a constant c

43、urrent of 0,1 I tA. The duration of the charge shall be 14 h to 16 h. 4.2 Discharge performance The following discharge tests shall be carried out in sequence given. All cells shall be tested at 20 C as well as at +5 C and/or 18 C. 4.2.1 Discharge performance at 20 C 4.2.1.1 Test procedure The cell

44、shall have been charged in accordance with 4.1. After charging, the cell shall be stored, in an ambient temperature of 20 C 5 C, for not less than 1 h and not more than 4 h. It shall then be discharged in the same ambient temperature and as specified in Table 3. Page10 EN60622:200360622 IEC:2002 11

45、Table 3 Discharge performance at 20 C Discharge conditions Minimum discharge duration h / min / s Rate of constant current Final voltage Cell designation A V L M H X 0,2 I ta1,0 5 h 5 h 5 h 5 h 1,0 I t1,0 38 min 48 min 54 min 5,0 I tb0,8 2 min 30 s 6 min 30 s 10,0 I tb0,8 1 min 30 s aFive cycles are

46、 permitted for this test which shall, however, be terminated at the end of the first cycle which meets the requirement. bBefore the 5 I tA and 10 I tA discharge tests, a conditioning cycle may be included if necessary. This cycle shall consist of charging at 0,1 I tA in according to 4.1 and discharg

47、ing at 0,2 I tA in an ambient temperature of at 20 C 5 C according to 4.2.1 4.2.1.2 Acceptance criteria The duration of discharge shall be not less than the minimum specified in Table 3. 4.2.2 Discharge performance at +5 C 4.2.2.1 Test procedure The cell shall have been charged in accordance with 4.

48、1. After charging, the cell shall be stored, in an ambient temperature of +5 C 2 C, for 24 h. Means must be provided to ensure that the electrolyte temperature has reached +5 C 2 C within 24 h. It shall then be discharged in the same ambient temperature and as specified in Table 4. Table 4 Discharge performance at +5 C Discharge conditions Minimum discharge duration h / min / s Rate of constant current Final voltage Cell designation A V L M H X 0,2 I t1,0 3 h 24 min 3 h 42 min 3 h 54 min 4 h 18 min 1,0 I t1,0 25 min 36 min 44 min 2,0 I ta1,0 10 min 18 min 30 s 3,0 I ta0,8 10 min 30

展开阅读全文
相关资源
  • BS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdfBS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdf
  • BS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdfBS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdf
  • BS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdfBS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdf
  • BS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdfBS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdf
  • BS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdfBS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdf
  • BS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdfBS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdf
  • BS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdfBS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdf
  • BS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdfBS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdf
  • BS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdfBS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdf
  • BS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdfBS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > BS

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1