1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationElectric and optical fibre cables Test methods for non-metallic materialsPart 607: Physical tests Test for the assessment of carbon black dispersion in polyethylene and polypropy
2、leneBS EN 60811-607:2012National forewordThis British Standard is the UK implementation of EN 60811-607:2012. It isidentical to IEC 60811-607:2012.In the UK, the relationship between the supersessions of BS EN 60811 seriescan be summarized as follows.Superseded standards are withdrawnThe UK particip
3、ation in its preparation was entrusted by Technical CommitteeGEL/20, Electric cables, to Subcommittee GEL/20/17, Electric Cables - Lowvoltage.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessar
4、y provisions of acontract. Users are responsible for its correct application. The British Standards Institution 2012Published by BSI Standards Limited 2012ISBN 978 0 580 65344 5ICS 29.035.01; 29.060.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standa
5、rd was published under the authority of the StandardsPolicy and Strategy Committee on 31 July 2012.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 60811-607:2012BS EN 60811-100 together with Supersedes - -201, -202, -203, -501 BS EN 60811-1-1:1995 -301, -302, -411
6、, -601, -602, -603, -604 BS EN 60811-5-1:2000 -401, -412 BS EN 60811-1-2:1995 -402, -502, -503, -606 BS EN 60811-1-3:1995 -403, -404, -507 BS EN 60811-2-1:1998 -405, -409 BS EN 60811-3-2:1995 -406, -511, -605, -607 BS EN 60811-4-1:2004 -407, -408, -410, -510, -512, -513 BS EN 60811-4-2:2004 -504, -5
7、05, -506 BS EN 60811-1-4:1995 -508, -509 BS EN 60811-3-1:1995EUROPEAN STANDARD EN 60811-607 NORME EUROPENNE EUROPISCHE NORM June 2012 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Manag
8、ement Centre: Avenue Marnix 17, B - 1000 Brussels 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60811-607:2012 E ICS 29.035.01; 29.060.20 Supersedes EN 60811-4-1:2004 (partially)English version Electric and optical fibre ca
9、bles - Test methods for non-metallic materials - Part 607: Physical tests - Test for the assessment of carbon black dispersion in polyethylene and polypropylene (IEC 60811-607:2012) Cbles lectriques et fibres optiques - Mthodes dessai pour les matriaux non-mtalliques - Partie 607: Essais physiques -
10、 Essai pour lvaluation de la dispersion du noir de carbone dans le polythylne et le polypropylne (CEI 60811-607:2012) Kabel, isolierte Leitungen und Glasfaserkabel - Prfverfahren fr nichtmetallene Werkstoffe - Teil 607: Physikalische Prfungen - Prfung fr die Bewertung der Russverteilung in Polyethyl
11、en und in Polypropylen (IEC 60811-607:2012) This European Standard was approved by CENELEC on 2012-04-17. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alter
12、ation. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language
13、made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czec
14、h Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. EN 60811-607:2012 - 2 - Foreword
15、The text of document 20/1316/FDIS, future edition 1 of IEC 60811-607, prepared by IEC/TC 20 “Electric cables“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60811-607:2012. The following dates are fixed: latest date by which the document has to be implemented at nationa
16、l level by publication of an identical national standard or by endorsement (dop) 2013-01-17 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2015-04-17 This document supersedes Clause 13 of EN 60811-4-1:2004 (partially). Full details of the replace
17、ments are shown in Annex A of EN 60811-100:2012. There are no technical changes with respect to EN 60811-4-1:2004, but see the Foreword to EN 60811-100:2012. This standard is to be read in conjunction with EN 60811-100. Attention is drawn to the possibility that some of the elements of this document
18、 may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC) Endors
19、ement notice The text of the International Standard IEC 60811-607:2012 was approved by CENELEC as a European Standard without any modification. BS EN 60811-607:2012- 3 - EN 60811-607:2012 Annex ZA (normative) Normative references to international publications with their corresponding European public
20、ations The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
21、NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60811-100 2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 100: General EN 60811-100 2012 ISO
22、 18553 2002 Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds - - BS EN 60811-607:2012 2 60811-607 IEC:2012 CONTENTS INTRODUCTION . 5 1 Scope . 6 2 Normative references . 6 3 Terms and definitions . 6 4 Test method . 6 4.1 Gener
23、al . 6 4.2 Procedure . 6 4.3 Expression of results . 7 4.4 Requirements 7 5 Test report 7 Bibliography 8 BS EN 60811-607:201260811-607 IEC:2012 5 INTRODUCTION The IEC 60811 series specifies the test methods to be used for testing non-metallic materials of all types of cables. These test methods are
24、intended to be referenced in standards for cable construction and for cable materials. NOTE 1 Non-metallic materials are typically used for insulating, sheathing, bedding, filling or taping within cables. NOTE 2 These test methods are accepted as basic and fundamental and have been developed and use
25、d over many years principally for the materials in all energy cables. They have also been widely accepted and used for other cables, in particular optical fibre cables, communication and control cables and cables for ships and offshore applications. BS EN 60811-607:2012 6 60811-607 IEC:2012 ELECTRIC
26、 AND OPTICAL FIBRE CABLES TEST METHODS FOR NON-METALLIC MATERIALS Part 607: Physical tests Test for the assessment of carbon black dispersion in polyethylene and polypropylene 1 Scope This Part 607 of IEC 60811 specifies test methods for carbon black dispersion that are applicable specifically to PE
27、 and PP compounds, including cellular compounds and foam skin for insulation. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated
28、references, the latest edition of the referenced document (including any amendments) applies. IEC 60811-100:2012, Electric and optical fibre cables Test methods for non-metallic materials Part 100: General ISO 18553:2002, Method for the assessment of the degree of pigment or carbon black dispersion
29、in polyolefin pipes, fittings and compounds 3 Terms and definitions For the purposes of this document, the terms and definitions given in IEC 60811-100 apply. 4 Test method 4.1 General This part of IEC 60811 shall be used in conjunction with IEC 60811-100. The assessment shall be carried out in acco
30、rdance with ISO 18553. The method is suitable for use with granules of polyethylene or granule of polypropylene compound or extrusion of polyethylene or polypropylene (for example a sheath). NOTE The method applies with less than 3 % carbon black content. ISO 18553 gives two procedures for the prepa
31、ration of test specimens. Either may be used, but the following recommendations apply: the compression procedure is primarily intended for use with polyethylene compounds, but may be used for extrusions; the microtome procedure is intended for use with polyethylene extrusions. 4.2 Procedure Prepare
32、the specified number of test specimens in accordance with ISO 18553. BS EN 60811-607:201260811-607 IEC:2012 7 Using the microscopic examination technique given in ISO 18553, examine the test specimens for a) degree of dispersion. b) rating of appearance. 4.3 Expression of results Express the results
33、 of the examination in the manner given in ISO 18553. 4.4 Requirements Unless otherwise stated in the relevant cable standard, the limits recommended in Annex D of ISO 18553:2002 shall be taken to indicate an acceptable degree of dispersion. NOTE Annex D of ISO 18553:2002 states: “The following limi
34、ts are recommended: Grading: mean (see 5.1) 3. Appearance rating: not worse than micrograph B in Annex B (i.e. only dispersion ratings comparable to photomicrographs A1, A2, A3 and B are acceptable).” 5 Test report The test report shall be in accordance with that given in IEC 60811-100. BS EN 60811-
35、607:2012 8 60811-607 IEC:2012 Bibliography IEC 60811-4-1:2004, Insulating and sheathing materials of electric and optical cables Common test methods Part 4-1:Methods specific to polyethylene and polypropylene compounds Resistance to environmental stress cracking Measurement of the melt flow index Ca
36、rbon black and/or mineral filler content measurement in polyethylene by direct combustion Measurement of carbon black content by thermogravimetric analysis (TGA) Assessment of carbon black dispersion in polyethylene using a microscope (withdrawn) _ BS EN 60811-607:2012This page deliberately left bla
37、nkBSI is the independent national body responsible for preparing British Standards and other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international level. BSI is incorporated by Royal Charter. British Standards and other stan
38、dardisation products are published by BSI Standards Limited.British Standards Institution (BSI)raising standards worldwideBSI389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards and PASs are periodically updated by amendment or revision. Users of British Standa
39、rds and PASs should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using British Standards would inform the Secretary of the techn
40、ical committee responsible, the identity of which can be found on the inside frontcover. Similary for PASs, please notify BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers BSI Subscribing Members an individual updating service called PLUS which ensures that subscriber
41、s automatically receive the latest editions of British Standards and PASs.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the website addition all orders for BSI, internation
42、al and foreign standards publicationscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for international standards, BSI will supply the British Standard implementation of the relevant international standard, unless otherwise reque
43、sted.Information on standardsBSI provides a wide range of information on national, Europeanand international standards through its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: BSI Subscribing Members are kept up to date with standards developments and receive substantial
44、discounts on the purchase priceof standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards and PASs via British Standards Online can be found at informatio
45、n about British Standards is available on the BSI website at www.bsi- the data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some person or entity that own copyright in the information used (such as the internat
46、ional standardisation bodies) has formally licensed such information to BSI for commerical publication and use. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, phot
47、ocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Department.Tel: +44 (0)20 8996 7070Email:
