1、BRITISH STANDARD BS EN 60870-6-601: 1995 IEC870-6-601: 1994 Telecontrol equipment and systems Part6: Telecontrol protocols compatible with ISO standards and ITU-T recommendations Section601: Functional profile for providing the connection-oriented transport service in end system connected via perman
2、ent access to a packet switched data network The European Standard EN60870-6-601:1995 has the status of a BritishStandardBSEN60870-6-601:1995 This British Standard, having been prepared under the directionof the Electrotechnical Sector Board, was published underthe authority of the Standards Board a
3、nd comesintoeffect on 15September1995 BSI11-1999 The following BSI references relate to the work on this standard: Committee reference PEL/57 Draft for comment93/205001 DC ISBN 0 580 24633 7 Committees responsible for this British Standard The preparation of this British Standard was entrusted to Te
4、chnical Committee PEL/57, Power system control and associated communications, upon which the following bodies were represented: Association of Consulting Engineers BEAMA Ltd. BEAMA Metering Association (BMA) EEA (Association of Electronics, Telecommunications and Business Equipment Industries) Elect
5、ricity Association GAMBICA (BEAMA Ltd.) Transmission and Distribution Association (BEAMA Ltd.) Amendments issued since publication Amd. No. Date CommentsBSEN60870-6-601:1995 BSI 11-1999 i Contents Page Committees responsible Inside front cover National foreword ii Foreword 2 Text of EN60870-6-601 3
6、List of references Inside back coverBSEN60870-6-601:1995 ii BSI 11-1999 National foreword This British Standard has been prepared by Technical Committee PEL/57 and is the English language version of EN60870-6-601:1995 Telecontrol equipment systems Part 6: Telecontrol protocols compatible with ISO st
7、andards and ITU-T recommendations Section601. Functional profile for providing the connection-oriented transport service in end system connected via permanent access to a packet switched data network published by the European Committee for Electrotechnical Standardization (CENELEC). It is identical
8、with IEC870-6-601:1994 published by the International Electrotechnical Commission(IEC). A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of
9、itself confer immunity from legal obligations. Cross-references Publication referred to Corresponding British Standard ISO7776:1986 BS5397: High-level data link control (HDLC) procedures Part7:1990 Specification for X.25 LAPB-compatible DTE data line procedures ISO8072:1994 a BS ISO/IEC8072:1994 Inf
10、ormation technology. Open Systems Interconnection. Transport service definition EN28073:1993 BS EN28073:1994 Information technology. ISO/IEC8073:1992 Telecommunications and information exchange between systems. Open Systems Interconnection. Protocol for providing the connection-mode transport servic
11、e ISO/IEC8208:1990 BS ISO/IEC8208:1990 Information technology. Data communications. X.25 packet layer protocol for data terminal equipment ISO/IEC8348:1993 BS ISO/IEC8348:1993 Information technology. Open systems interconnection. Network service definition ISO/IEC8878:1992 BS ISO/IEC8878:1992 Inform
12、ation technology. Telecommunications and information exchange between systems. Use of X.25 to provide the OSI connection-mode network service ISO/IEC TR10029: 1989 BS7267:1990 Open systems interconnection: guide to operation of an X.25 interworking unit BS ISO/IEC ISP10609 Information technology. In
13、ternational Standardized Profiles TB, TC, TD andTE. Connection-mode Transport Service over connection-mode Network Service ISO/IEC ISP10909-1: 1992 Part1:1992 Subnetwork-type independent requirements for Group TB ISO/IEC ISP10609-5: 1992 Part5:1992 Definition of profiles TB1111/TB1121 ISO/IEC ISP106
14、09-9: 1992 Part9:1992 Subnetwork-type dependent requirements for Network Layer, Data Link Layer and Physical Layer concerning permanent access to a packet switched data network using virtual calls a ISO8072:1994 has superseded the1986 edition. Summary of pages This document comprises a front cover,
15、an inside front cover, pagesi andii, theEN title page, pages2 to10, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.EUROPEAN STANDARD NORME EUR
16、OPENNE EUROPISCHE NORM EN60870-6-601 February1995 ICS 33.200 Descriptors: Telecontrol, data transmission, protocol, functional profile, Open Systems Interconnection, connection-oriented transmission, service English version Telecontrol equipment and systems Part6: Telecontrol protocols compatible wi
17、th ISO standards ITU-T recommendations Section601: Functional profile for providing the connection-oriented transport service in end system connected via permanent access to a packet switched data network (IEC870-6-601:1994) Matriels et systmes de tlconduite Partie6: Protocoles de tlconduite compati
18、bles avec les normes ISO et les recommandations de lUIT-T Section601: Profil fonctionnel pour fournir le service de transport en mode connexion dans un systme dextrmit connect par un accs permanent un rseau de commmutation de paquets (CEI870-6-601:1994) Fernwirkeinrichtungen und -systeme Teil6: Fern
19、wirkprotokolle, die mit ISO-Normen und ITU-T Empfehlungen kompatibel sind Hauptabschnitt601: Funktionsprofil fr den verbindungsorientierten Transportdienst in einem Endsystem mit Festlanschlu an ein paketvermittelndes Datennetz (IEC870-6-601:1994) This European Standard was approved by CENELEC on199
20、5-02-15. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be
21、obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the
22、Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and UnitedKing
23、dom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1995 Copyright reserved to CENELEC members Ref. No. EN60870-6-601:1995 EEN608
24、70-6-601:1995 2 BSI 11-1999 Foreword The text of document57(CO)74, future edition1 of IEC870-6-601, prepared by IEC TC57, Power system control and associated communications, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN60870-6-601 on1995-02-15. The following dates
25、were fixed: Contents Page Foreword 2 Introduction 3 1 Scope 3 2 Normative references 4 3 Definitions and abbreviations 5 3.1 Definitions 5 3.2 Abbreviations 5 4 Scenario description 5 5 Profile protocol stacks 5 6 Conformance requirements 6 6.1 Transport Layer 6 6.2 Network Layer 7 6.3 Data Link Lay
26、er 8 6.4 Physical Layer 8 Annex A (informative) Bibliography 9 latest date by which the ENhas to be implemented at national level by publication of an identical national standard or by endorsement (dop)1996-02-15 latest date by which the national standards conflicting with the EN haveto be withdrawn
27、 (dow)1996-02-15EN60870-6-601:1995 BSI 11-1999 3 Introduction This section of IEC870-6 defines functional profiles to be used in telecommunication networks for electric power systems. It is largely based on existing ISO/IEC International Standards and International Standardized Profiles (ISP). The n
28、otion of Functional Profile is fundamental in the organization of IEC870-6. A description of Functional Profiles, their classification scheme, and the manner of defining them are laid down in Part6, Section1. The present section is a Transport-class Profile providing the COnnection-mode Transport Se
29、rvice(COTS) over the COnnection-mode Network Service (CONS) for the specific case of permanent access to a Packet Switched Data Network (PSDN). ISO defined a multi-part ISP for specification of COTS over CONS or CLNS profiles: the ISP10609. In the ISO taxonomy, it corresponds to Transport Profiles T
30、B1111 for analog permanent access and TB1121 for digital permanent access to a PSDN. It makes frequent reference to the International Standardized Profiles ISO/IEC ISP10609-1, ISO/IEC ISP10609-5 and ISO/IEC ISP10609-9. 1 Scope This Functional Profile (FP) defines the provision of the OSI Connection-
31、mode Transport Service between an End System (“The Reference End System”) which uses a Permanent Analog or Digital Circuit to access a Packet Switched Data Network (PSDN) and another End System (“The Compatible End System”) which is accessible, by permanent or switched methods, either directly from
32、the same PSDN, or indirectly through the provided OSI Connection-mode Network Service. This FP also defines the provision of the OSI Connection-mode Network Service between the Reference End System and the Compatible End System using the X.25 subnetwork procedures to aPSDN. This FP is applicable to
33、environments which support the OSI Network Service. In the ISO taxonomy four options are defined as a function of the transport protocol classes operated: Implementation of the option TD (class0 only) requires that the End System does not operate any of the multiplexing classes (class2,3, or4) of th
34、e Transport Protocol procedures. Such End Systems will only interwork with End Systems that also implement class0 Transport Protocol procedures. Implementation of the other options (groups TB, TC, TE) in one End System, enables that End System to interwork with any End System conforming to ISO8073.
35、This FP recommends the implementation of classes0,2 and4 in End Systems. In the ISO taxonomy such End Systems with permanent access to a PSDN are referenced with profiles TB1111 (foranalog access) orTB1121 (for digital access). NOTEThe FP specifies a set of protocols to be used in the Reference End
36、System in order to provide the function defined above. It does not specify total End System capability. Therequirements placed on an End System in this section of IEC870-6 are solely those necessary for operation of the protocol set specified. The format of this section is in conjunction with one of
37、 the ISO/IEC ISPs. These ISPs are defined in a multi-part way. For example, to define the profiles TB1111 and TB1121, the present section refers to the three different ISO/IEC ISPs, listed in clause2. When applicable the present section follows ISO/IEC ISP10609-1, ISO/IEC ISP10609-5 and ISO/IEC ISP1
38、0609-9. The present section defines some complementary specifications to ISP10609. Thosespecifications mainly concern the priority management and the transport class negotiation. Group TB: includes transport protocol classes0,2 and4, Group TC: includes transport protocol classes0 and2, Group TD: inc
39、ludes transport protocol class0, Group TE: includes transport protocol class2.EN60870-6-601:1995 4 BSI 11-1999 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this section of IEC870-6. Atthe time of publicati
40、on, the editions indicated were valid. All normative documents are subject to revision, and parties to agreements based on this section of IEC870-6 are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. Members of IEC and ISO ma
41、intain registers of currently valid InternationalStandards. 57/201/DIS, Telecontrol equipment and systems Part6: Telecontrol protocols compatible with ISOstandards and ITU-T recommendations Section2: Use of base standards Layers1 to4 (futureIEC870-6-2). ISO7776:1986, Information processing systems D
42、ata communications High-level data link control procedures Description of the X.25 LAPB-compatible DTE data link procedures. ISO8072:1986, Information processing systems Open Systems Interconnection Transport service definition. ISO/IEC8073:1992, Information technology Telecommunications and informa
43、tion exchange between systems Open Systems Interconnection Protocol for providing the connection-mode transport service. ISO/IEC8208:1990, Information technology Data communications X.25 Packet Layer Protocol for Data Terminal Equipment Amendment3:1991, Conformance requirements. ISO8348:1993, Inform
44、ation technology Open Systems Interconnection Network Service Definition. ISO/IEC8878:1992, Information technology Telecommunications and information exchange between systems Use of X.25 to provide the OSI Connection-mode Network Service. ITU-T X.21:1988, Interface between data terminal equipment (D
45、TE) and data-terminating equipment(DCE) for synchronous operation on public data networks (PDNs). ITU-T X.21 bis:1988, Use on PDNs of DTE which is designed for interfacing to synchronous V-series modems. ITU-T X.25:1988, Interface between DTE and DCE for terminals operating in the packet mode and co
46、nnected to public data networks by dedicated circuit. ISO DIS10732:1992, Information technology Telecommunications and information exchange between systems Use of X.25 Packet Layer Protocol to provide the OSI Connection-mode Network Service over the telephone network. ISO DIS10588:1992, Information
47、technology Telecommunications and information exchange between systems Use of X.25 Packet Layer Protocol in conjunction with X.21/X.21 bis to provide the OSIConnection-mode Network Service. ISO/IEC TR10029:1989, Information technology Telecommunications and information exchange between systems Opera
48、tion of an X.25 interworking unit. ISO/IEC ISP10609-1:1992, Information technology International Standardized Profiles TB, TC, TD and TE Connection-mode Transport Service over connection-mode Network Service Part1: Subnetwork-type independent requirements for Group TB. ISO/IEC ISP10609-5:1992, Infor
49、mation technology International Standardized ProfilesTB, TC, TD and TE Connection-mode Transport Service over connection-mode Network Service Part5: Definition of profiles TB1111/TB1121. ISO/IEC ISP10609-9:1992, Information technology International Standardized ProfilesTB, TC, TD and TE Connection-mode Transport Service over connection-mode Network Service Part9: Subnetwork-type dependent requirements for Network Layer, Data Link Layer and Physical Layer concerning permanent access to
