BS EN 60909-3-2010 Short-circuit currents in three-phase a c systems - Currents during two separate simultaneous line-to-earth short-circuits and partial short-circuit currents flo.pdf

上传人:王申宇 文档编号:576548 上传时间:2018-12-13 格式:PDF 页数:60 大小:1.79MB
下载 相关 举报
BS EN 60909-3-2010 Short-circuit currents in three-phase a c systems - Currents during two separate simultaneous line-to-earth short-circuits and partial short-circuit currents flo.pdf_第1页
第1页 / 共60页
BS EN 60909-3-2010 Short-circuit currents in three-phase a c systems - Currents during two separate simultaneous line-to-earth short-circuits and partial short-circuit currents flo.pdf_第2页
第2页 / 共60页
BS EN 60909-3-2010 Short-circuit currents in three-phase a c systems - Currents during two separate simultaneous line-to-earth short-circuits and partial short-circuit currents flo.pdf_第3页
第3页 / 共60页
BS EN 60909-3-2010 Short-circuit currents in three-phase a c systems - Currents during two separate simultaneous line-to-earth short-circuits and partial short-circuit currents flo.pdf_第4页
第4页 / 共60页
BS EN 60909-3-2010 Short-circuit currents in three-phase a c systems - Currents during two separate simultaneous line-to-earth short-circuits and partial short-circuit currents flo.pdf_第5页
第5页 / 共60页
亲,该文档总共60页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述

1、BSI Standards PublicationShort-circuit currents in three-phase a.c systemsPart 3: Currents during two separate simultaneous line-to-earth short-circuits and partial short-circuit currents flowing through earthBS EN 60909-3:2010BS EN 60909-3:2010Incorporating corrigendum September 2013BS EN 60909-3:2

2、010 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 60909-3:2010. It isidentical to IEC 60909-3:2009, incorporating corrigendum September 2013.It supersedes BS EN 60909-3:2003 which is withdrawn.The start and finish of text introduced or altered by corrigendum i

3、s indicatedin the text by tags. Text altered by IEC corrigendum September 2013 is indic-ated in the text by .The UK participation in its preparation was entrusted to TechnicalCommittee PEL/73, Short circuit currents.A list of organizations represented on this committee can be obtainedon request to i

4、ts secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application. The British Standards Institution 2013.Published by BSI Standards Limited 2013ISBN 978 0 580 84438 6ICS 17.220.01; 29.020; 29.240.20Compliance with

5、a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 30 April 2010.Amendments/corrigenda issued since publicationDate Text affected31 October 2013 Implementation of IEC corrigendum Se

6、ptember 2013EUROPEAN STANDARD EN 60909-3 NORME EUROPENNE EUROPISCHE NORM March 2010 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: Avenue Marnix 17, B - 1000 Brussel

7、s 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60909-3:2010 E ICS 17.220.01; 29.240.20 Supersedes EN 60909-3:2003English version Short-circuit currents in three-phase a.c systems - Part 3: Currents during two separate simu

8、ltaneous line-to-earth short-circuits and partial short-circuit currents flowing through earth (IEC 60909-3:2009) Courants de court-circuit dans les rseaux triphass courant alternatif - Partie 3: Courants durant deux courts-circuits monophass simultans spars la terre et courants de court-circuit par

9、tiels scoulant travers la terre (CEI 60909-3:2009) Kurzschlussstrme in Drehstromnetzen - Teil 3: Strme bei Doppelerdkurzschluss und Teilkurzschlussstrme ber Erde (IEC 60909-3:2009) This European Standard was approved by CENELEC on 2010-03-01. CENELEC members are bound to comply with the CEN/CENELEC

10、Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENEL

11、EC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.

12、CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Roma

13、nia, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 60909-3:2010EN 60909-3:2010 - 2 - Foreword The text of document 73/148/FDIS, future edition 3 of IEC 60909-3, prepared by IEC TC 73, Short-circuit currents, was submitted to the IEC-CENELEC parallel vote and was approv

14、ed by CENELEC as EN 60909-3 on 2010-03-01. This standard is to be used in conjunction with EN 60909-0:2001. This European Standard supersedes EN 60909-3:2003. The main changes with respect to EN 60909-3:2003 are listed below: New procedures are introduced for the calculation of reduction factors of

15、the sheaths or shields and in addition the current distribution through earth and the sheaths or shields of three-core cables or of three single-core cables with metallic non-magnetic sheaths or shields earthed at both ends; The information for the calculation of the reduction factor of overhead lin

16、es with earth wires are corrected and given in the new Clause 7; A new Clause 8 is introduced for the calculation of current distribution and reduction factor of three-core cables with metallic sheath or shield earthed at both ends; The new Annexes C and D provide examples for the calculation of red

17、uction factors and current distribution in case of cables with metallic sheath and shield earthed at both ends. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or a

18、ll such patent rights. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2010-12-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow

19、) 2013-03-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 60909-3:2009 was approved by CENELEC as a European Standard without any modification. _ BS EN 60909-3:2010EN 60909-3:2010- 3 - EN 60909-3:2010 Annex ZA (normative) Normative references to

20、 international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including

21、 any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60909-0 2001 Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents EN 60909

22、0 2001 IEC/TR 60909-2 2008 Short-circuit currents in three-phase a.c. systems - Part 2: Data of electrical equipment for short-circuit current calculations - - BS EN 60909-3:2010BS EN 60909-3:2010EN 60909-3:2010 2 60909-3 IEC:2009 CONTENTS 1 Scope and object7 2 Normative references .8 3 Terms and d

23、efinitions .8 4 Symbols .10 5 Calculation of currents during two separate simultaneous line-to-earth short circuits .12 5.1 Initial symmetrical short-circuit current 12 5.1.1 Determination of )( 1M and )( 2M .12 5.1.2 Simple cases of two separate simultaneous line-to-earth short circuits.13 5.2 Peak

24、 short-circuit current, symmetrical short circuit breaking current and steady-state short-circuit current .13 5.3 Distribution of the currents during two separate simultaneous line-to-earth short circuits14 6 Calculation of partial short-circuit currents flowing through earth in case of an unbalance

25、d short circuit14 6.1 General .14 6.2 Line-to-earth short circuit inside a station 15 6.3 Line-to-earth short circuit outside a station16 6.4 Line-to-earth short circuit in the vicinity of a station.18 6.4.1 Earth potential UETnat the tower n outside station B 19 6.4.2 Earth potential of station B d

26、uring a line-to earth short circuit at the tower n 19 7 Reduction factor for overhead lines with earth wires.20 8 Calculation of current distribution and reduction factor in case of cables with metallic sheath or shield earthed at both ends21 8.1 Overview .21 8.2 Three-core cable .22 8.2.1 Line-to-e

27、arth short circuit in station B 22 8.2.2 Line-to-earth short circuit on the cable between station A and station B23 8.3 Three single-core cables .26 8.3.1 Line-to-earth short circuit in station B 26 8.3.2 Line-to-earth short circuit on the cable between station A and station B26 Annex A (informative

28、) Example for the calculation of two separate simultaneous line-to-earth short-circuit currents30 Annex B (informative) Examples for the calculation of partial short-circuit currents through earth 33 Annex C (informative) Example for the calculation of the reduction factor r1and the current distribu

29、tion through earth in case of a three-core cable.43 Annex D (informative) Example for the calculation of the reduction factor r3and the current distribution through earth in case of three single-core cables 48 BS EN 60909-3:2010BS EN 60909-3:201060909-3 IEC:200960909-3 IEC:2009 3 Figure 1 Driving po

30、int impedance ZPof an infinite chain, composed of the earth wire impedance QQZ Zd=Tand the footing resistance RTof the towers, with equal distances dTbetween the towers.9 Figure 2 Driving point impedance ZPnof a finite chain with n towers, composed of the earth wire impedance TQQdZZ = , the footing

31、resistance RTof the towers, with equal distances dTbetween the towers and the earthing impedance ZEBof station B from Equation (29)10 Figure 3 Characterisation of two separate simultaneous line-to earth short circuits and the currents “kEEI .12 Figure 4 Partial short-circuit currents in case of a li

32、ne-to-earth short circuit inside station B .15 Figure 5 Partial short-circuit currents in case of a line-to-earth short circuit at a tower T of an overhead line 16 Figure 6 Distribution of the total current to earth ETtotI 17 Figure 7 Partial shortcircuit currents in the case of a line-to-earth shor

33、t circuit at a tower n of an overhead line in the vicinity of station B .18 Figure 8 Reduction factor r for overhead lines with non-magnetic earth wires depending on soil resistivity .21 Figure 9 Reduction factor of three-core power cables 23 Figure 10 Reduction factors for three single-core power c

34、ables .27 Figure A.1 Two separate simultaneous line-to-earth short circuits on a single fed overhead line (see Table 1) 30 Figure B.1 Line-to-earth short circuit inside station B System diagram for stations A, B and C 34 Figure B.2 Line-to-earth short circuit inside station B Positive-, negative- an

35、d zero-sequence systems with connections at the short-circuit location F within station B.34 Figure B.3 Line-to-earth short circuit outside stations B and C at the tower T of an overhead line System diagram for stations A, B and C .36 Figure B.4 Line-to-earth short circuit outside stations B and C a

36、t the tower T of an overhead line Positive-, negative- and zero-sequence systems with connections at the short-circuit location F.37 Figure B.5 Earth potentials uETn= UEtn /UETwith UET= 1,912 kV and uEBn= UEbn /UEB with UEB= 0,972 kV, if the line-to-earth short circuit occurs at the towers n = 1, 2,

37、 3, . in the vicinity of station B42 Figure C.1 Example for the calculation of the cable reduction factor and the current distribution through earth in a 10-kV-network, Un= 10 kV; c = 1,1; f = 50 Hz 44 Figure C.2 Short-circuit currents and partial short-circuit currents through earth for the example

38、 in Figure C.1.45 Figure C.3 Example for the calculation of current distribution in a 10-kV-network with a short circuit on the cable between A and B (data given in C.2.1 and Figure C.1).46 Figure C.4 Line-to-earth short-circuit currents, partial currents in the shield and partial currents through e

39、arth47 Figure D.1 Example for the calculation of the reduction factor and the current distribution in case of three single-core cables and a line-to-earth short circuit in station B .49 Figure D.2 Positive-, negative- and zero-sequence system of the network in Figure D.1 with connections at the shor

40、t-circuit location (station B) .50 Figure D.3 Current distribution for the network in Figure D.1, depending on the length, , of the single-core cables between the stations A and B51 BS EN 60909-3:2010BS EN 60909-3:201060909-3 IEC:2009 4 60909-3 IEC:2009 Figure D.4 Example for the calculation of the

41、reduction factors 3r and the current distribution in case of three single-core cables and a line-to-earth short circuit between the stations A and B .52 Figure D.5 Positive-, negative- and zero-sequence system of the network in Figure D.4 with connections at the short-circuit location (anywhere betw

42、een the stations A and B) 52 Figure D.6 Current distribution for the cable in Figure D.4 depending on A, REF.54 Figure D.7 Current distribution for the cable in Figure D.4 depending on A, REF= 5 56 Table 1 Calculation of initial line-to-earth short-circuit currents in simple cases 13 Table 2 Resisti

43、vity of the soil and equivalent earth penetration depth 20 Table C.1 Results for the example in Figure C.1 45 Table C.2 Results for the example in Figure C.3, km5=l .47 Table C.3 Results for the example in Figure C.3, km10=l .47 BS EN 60909-3:2010BS EN 60909-3:201060909-3 IEC:200960909-3 IEC:2009 7

44、SHORT-CIRCUIT CURRENTS IN THREE-PHASE AC SYSTEMS Part 3: Currents during two separate simultaneous line-to-earth short circuits and partial short-circuit currents flowing through earth 1 Scope and object This part of IEC 60909 specifies procedures for calculation of the prospective short-circuit cur

45、rents with an unbalanced short circuit in high-voltage three-phase a.c. systems operating at nominal frequency 50 Hz or 60 Hz, i. e.: a) currents during two separate simultaneous line-to-earth short circuits in isolated neutral or resonant earthed neutral systems; b) partial short-circuit currents f

46、lowing through earth in case of single line-to-earth short circuit in solidly earthed or low-impedance earthed neutral systems. The currents calculated by these procedures are used when determining induced voltages or touch or step voltages and rise of earth potential at a station (power station or

47、substation) and the towers of overhead lines. Procedures are given for the calculation of reduction factors of overhead lines with one or two earth wires. The standard does not cover: a) short-circuit currents deliberately created under controlled conditions as in short circuit testing stations, or

48、b) short-circuit currents in the electrical installations on board ships or aeroplanes, or c) single line-to-earth fault currents in isolated or resonant earthed systems. The object of this standard is to establish practical and concise procedures for the calculation of line-to-earth short-circuit c

49、urrents during two separate simultaneous line-to-earth short circuits and partial short-circuit currents through earth, earth wires of overhead lines and sheaths or shields of cables leading to conservative results with sufficient accuracy. For this purpose, the short-circuit currents are determined by considering an equivalent voltage source at the short-circuit location with all other voltage sources set to zero. Resista

展开阅读全文
相关资源
猜你喜欢
  • BS 7252-8-1997 Metallic materials for surgical implants - Specification for wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy《外科植入物用金属材料 可锻钴-镍-铬-钼-钨-铁合金规范》.pdf BS 7252-8-1997 Metallic materials for surgical implants - Specification for wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy《外科植入物用金属材料 可锻钴-镍-铬-钼-钨-铁合金规范》.pdf
  • BS 7254-2-1990 Orthopaedic implants - Specification for general requirements for materials and finish《矫形外科植入物 第2部分 材料和精加工一般要求规范》.pdf BS 7254-2-1990 Orthopaedic implants - Specification for general requirements for materials and finish《矫形外科植入物 第2部分 材料和精加工一般要求规范》.pdf
  • BS 7254-3-1990 Orthopaedic implants - Recommendations for care and handling《矫形外科植入物 第3部分 维护和使用推荐标准》.pdf BS 7254-3-1990 Orthopaedic implants - Recommendations for care and handling《矫形外科植入物 第3部分 维护和使用推荐标准》.pdf
  • BS 7254-4-1990 Orthopaedic implants - Recommendations for retrieval and examination of implants and associated tissues《矫形外科植入物 第4部分 植入物和有关组织的修补及检验推荐标准》.pdf BS 7254-4-1990 Orthopaedic implants - Recommendations for retrieval and examination of implants and associated tissues《矫形外科植入物 第4部分 植入物和有关组织的修补及检验推荐标准》.pdf
  • BS 7254-5-1990 Orthopaedic implants Specification for production of castings made of cobalt-chromium-molybdenum alloy《整形外科植入物 钴-铬-钼合金制铸件的生产规范》.pdf BS 7254-5-1990 Orthopaedic implants Specification for production of castings made of cobalt-chromium-molybdenum alloy《整形外科植入物 钴-铬-钼合金制铸件的生产规范》.pdf
  • BS 7255-2012 Code of practice for safe working on lifts《在升降机上安全工作的操作规程》.pdf BS 7255-2012 Code of practice for safe working on lifts《在升降机上安全工作的操作规程》.pdf
  • BS 7262-1990 Specification for automatic safe load indicators《自动安全负载指示器规范》.pdf BS 7262-1990 Specification for automatic safe load indicators《自动安全负载指示器规范》.pdf
  • BS 7267-1990 Open systems interconnection guide to operation of an X 25 interworking unit《开放式系统互连 X2 5交互工作装置操作指南》.pdf BS 7267-1990 Open systems interconnection guide to operation of an X 25 interworking unit《开放式系统互连 X2 5交互工作装置操作指南》.pdf
  • BS 7269-1-1991 Drycleanability of leather garments - Specification for drycleanability and for appropriate care labels《皮革服装耐干洗性 第1部分 耐干洗性和正确保养标签规范》.pdf BS 7269-1-1991 Drycleanability of leather garments - Specification for drycleanability and for appropriate care labels《皮革服装耐干洗性 第1部分 耐干洗性和正确保养标签规范》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > BS

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1