1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationAC and/or DC-supplied electronic control gear for tubular fluorescent lamps Performance requirementsBS EN 60929:2011Copyright European Committee for Electrotechnical Standardizat
2、ion Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-National forewordThis British Standard is the UK implementation of EN 60929:2011. It is identical to IEC 60929:2011. It supersedes BS EN 60925:1991 and BS EN 60929:2006, w
3、hich will be withdrawn on 23 June 2014.The UK participation in its preparation was entrusted by Technical Com-mittee CPL/34, Lamps and Related Equipment, to Subcommittee CPL/34/3, Auxiliaries for lamps.A list of organizations represented on this committee can be obtained on request to its secretary.
4、This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2011ISBN 978 0 580 64148 0 ICS 29.140.30Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published
5、 under the authority of the Standards Policy and Strategy Committee on 30 November 2011.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 60929:2011Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for Re
6、saleNo reproduction or networking permitted without license from IHS-,-,-EUROPEAN STANDARD EN 60929 NORME EUROPENNE EUROPISCHE NORM July 2011 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normu
7、ng Management Centre: Avenue Marnix 17, B - 1000 Brussels 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60929:2011 E ICS 29.140.30 Supersedes EN 60929:2006 + corr. Dec.2006English version AC and/or DC-supplied electronic co
8、ntrol gear for tubular fluorescent lamps - Performance requirements (IEC 60929:2011) Appareillages lectroniques aliments en courant alternatif et/ou continu pour lampes tubulaires fluorescence - Exigences de performances (CEI 60929:2011) Wechsel- und/oder gleichstromversorgte elektronische Betriebsg
9、erte fr rhrenfrmige Leuchtstofflampen - Anforderungen an die Arbeitsweise (IEC 60929:2011) This European Standard was approved by CENELEC on 2011-06-23. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the
10、status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, Germ
11、an). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria
12、, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 60929:20
13、11Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 60929:2011 - 2 - Foreword The text of document 34C/963/FDIS, future edition 4 of IEC 60929, prepared by
14、SC 34C, Auxiliaries for lamps, of IEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60929 on 2011-06-23. This European Standard supersedes EN 60929:2006 + corr. Dec.2006. The essential change with respect to EN 60929:2006 + corr.
15、 Dec.2006 is the extension to DC supplied control gear and the deletion of the requirements for digital signal control of electronic control gear. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held r
16、esponsible for identifying any or all such patent rights. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2012-03-23 latest date by which the national standards conflicting wi
17、th the EN have to be withdrawn (dow) 2014-06-23 NOTE In this standard, the following print types are used: Requirements proper: in roman type. Test specifications: in italic type. Explanatory matter: in smaller roman type. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the Inte
18、rnational Standard IEC 60929:2011 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61000-3-2 NOTE Harmonized as EN 61000-3-2. IEC 61000-4-30 IEC 61547 NOTE Harmoni
19、zed as EN 61000-4-30. NOTE Harmonized as EN 61547 _ BS EN 60929:2011Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- 3 - EN 60929:2011 Annex ZA (normative) N
20、ormative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenc
21、ed document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60081 + A1 (mod) + A2 + A3 + A4 1997 2000 2003 2005 2010 Double-capped fluorescent l
22、amps - Performance specifications EN 60081 + A1 + A2 + A3 + A4 1998 2002 2003 2005 2010 IEC 60901 + A1 + A2 + A3 + A4 1996 1997 2000 2004 2007 Single-capped fluorescent lamps - Performance specifications EN 60901 + A1 + corr. October + A2 + A3 + A4 1996 1997 1997 2000 2004 2008 IEC 61347-1 (mod) 200
23、7 Lamp controlgear - Part 1: General and safety requirements EN 61347-1 2008 IEC 61347-2-3 + A1 + A2 2000 2004 2006 Lamp controlgear - Part 2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps EN 61347-2-3 + corr. July + corr. December + A1 + A2 2001 2003 2010 200
24、4 2006 IEC 62386 Series Digital addressable lighting interface EN 62386 Series BS EN 60929:2011Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- 2 60929 IEC:2
25、011 CONTENTS INTRODUCTION . 6 1 Scope . 7 2 Normative references . 7 3 Terms and definitions . 8 4 General notes on tests . 9 5 Marking 10 5.1 Mandatory marking 10 5.2 Additional mandatory Information 10 5.3 Non-mandatory information . 10 6 General statement 11 7 Starting conditions 11 7.1 General .
26、 11 7.2 Conditions for control gear with preheating 11 7.2.1 General . 11 7.2.2 Preheat energy 11 7.2.3 Open-circuit voltage 12 7.3 Conditions for control gear without preheating . 13 7.3.1 General . 13 7.3.2 Open-circuit voltage 13 7.3.3 Control gear impedance test 13 7.3.4 Cathode current . 13 7.4
27、 Starting aid and distances . 14 8 Operating conditions 14 8.1 Ballast lumen factor . 14 8.2 Total circuit power . 14 8.3 Requirements for dimming . 14 8.3.1 Lamp cathode heating . 14 8.3.2 Control interfaces 14 8.4 Current limitation . 14 9 Circuit power factor 14 10 Supply current 15 11 Maximum cu
28、rrent in any lead to a cathode 15 12 Lamp operating current waveform . 15 13 Impedance at audio frequencies . 15 14 Operational tests for abnormal conditions . 16 14.1 Removal of lamp(s) . 16 14.2 Lamp fails to start 16 14.3 Control gear behaviour close to end of lamp life 16 15 Endurance 16 15.1 Ge
29、neral . 16 15.2 Temperature cycling 16 15.3 Test at tc +10 K . 17 Annex A (normative) Tests . 21 Annex B (normative) Reference ballasts 26 BS EN 60929:2011Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or netw
30、orking permitted without license from IHS-,-,-60929 IEC:2011 3 Annex C (normative) Conditions for reference lamps . 30 Annex D (informative) Explanation of starting conditions 31 Annex E (normative) Control interface for controllable control gear 35 Bibliography 40 Figure 1 Schematic illustration of
31、 the energy required for preheating and starting 18 Figure 2 Test circuits for non-preheat starting mode 20 Figure A.1 Measurement of impedance at audio frequencies 24 Figure A.2 Test circuit for control gear for preheat starting mode . 25 Figure B.1 HF reference circuit 29 Figure E.1 Functional spe
32、cification for d.c. voltage control . 35 Figure E.2 Connection diagram for several controllable control gear 36 Figure E.3 Circuit diagram with current sourcing 36 Figure E.4 Functional specification for PWM control 37 Figure E.5 PWM signal characteristics . 37 Figure E.6 Connecting diagram for PWM
33、controllable control gear . 38 Figure E.7 Dimming curve for controllable control gear 39 Table 1 Control gear life time information . 10 BS EN 60929:2011Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networ
34、king permitted without license from IHS-,-,- 6 60929 IEC:2011 INTRODUCTION This International Standard covers performance requirements for electronic control gear for use on a.c., at 50 Hz or 60 Hz, and/or d.c. supplies up to 1 000 V with operating frequencies deviating from the supply frequency, as
35、sociated with tubular fluorescent lamps as specified in IEC 60081 and IEC 60901, and other tubular fluorescent lamps for high frequency operation, still to be standardised. These control gear are intended to operate lamps at various frequencies including high frequencies and at various lamp powers.
36、Attention is drawn to the fact that operating frequencies below 20 kHz may cause audio noise disturbance, whereas frequencies above 50 kHz may increase radio interference problems. Some lamps may be specifically designed for high-frequency operation on high-frequency control gear. Two starting modes
37、, preheat and non-preheat, are described. NOTE Lamps, only specified for preheat starting may be operated on other types of circuits. The control gear manufacturer should provide test data which shows satisfactory starting and operation similar as the ones stated in Clause 6. In order to obtain sati
38、sfactory performance of fluorescent lamps and electronic control gears, it is necessary that certain features of their design be properly co-ordinated. It is essential, therefore, that specifications for them be written in terms of measurement made against some common baseline of reference, permanen
39、t and reproducible. These conditions may be fulfilled by reference ballasts. Moreover, the testing of control gear for fluorescent lamps will, in general, be made with reference lamps and, in particular, by comparing results obtained on such lamps with control gear to be tested and with reference ba
40、llast. Whereas the reference ballast for frequencies of 50 Hz or 60 Hz is a self-inductive coil, the high-frequency reference ballast is a resistor because of its independence of frequency and the lack of influence of parasitic capacitance. BS EN 60929:2011Copyright European Committee for Electrotec
41、hnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-60929 IEC:2011 7 AC and/or DC-SUPPLIED ELECTRONIC CONTROL GEAR FOR TUBULAR FLUORESCENT LAMPS PERFORMANCE REQUIREMENTS 1 Scope This international Standar
42、d specifies performance requirements for electronic control gear for use on a.c. at 50 Hz or 60 Hz and/or d.c. supplies, both up to 1 000 V, with operating frequencies deviating from the supply frequency, associated with fluorescent lamps as specified in IEC 60081 and IEC 60901, and other fluorescen
43、t lamps for high-frequency operation. NOTE 1 Tests in this standard are type tests. Requirements for testing individual control gear during production are not included. NOTE 2 There are regional standards regarding the regulation of mains current harmonics and immunity for end-products like luminair
44、es and independent control gear. In a luminaire, the control gear is dominant in this respect. Control gear, together with other components, should comply with these standards. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated
45、 references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60081:1997, Double-capped fluorescent lamps Performance specifications Amendment 1(2000) Amendment 2 (2003) Amendment 3 (2005) Amendment 4 (2010)
46、 IEC 60901:1996, Single-capped fluorescent lamps Performance specifications Amendment 1(1997) Amendment 2 (2000) Amendment 3 (2004) Amendment 4 (2007) IEC 61347-1:2007, Lamp controlgear Part 1: General and safety requirements Amendment 1(2010)1IEC 61347-2-3:2000, Lamp controlgear Part 2-3: Particula
47、r requirements for a.c. supplied electronic ballasts for fluorescent lamps Amendment 1(2004) Amendment 2 (2006) IEC 62386 (all parts), Digital addressable lighting 1There exists a consolidated edition 2.1 (2010) that comprises IEC 61347-1:2007 and its Amendment 1 (2010). BS EN 60929:2011Copyright Eu
48、ropean Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- 8 60929 IEC:2011 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 starting aid a conductive strip affixed to the outer surface of a lamp, or a conductive plate which is spaced within an appropriate distance from the lamp A starting aid is usually connected
