1、BSI Standards PublicationLow-voltage switchgear and controlgearPart 5-3: Control circuit devices and switching elements Requirements for proximity devices with defined behaviour under fault conditions (PDDB)BS EN 60947-5-3:2013Copyright European Committee for Electrotechnical Standardization Provide
2、d by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-National forewordThis British Standard is the UK implementation of EN 60947-5-3:2013. It isidentical to IEC 60947-5-3:2013. It supersedes BS EN 60947-5-3:1999, whichwill be withdrawn
3、 on 10 September 2016.The UK participation in its preparation was entrusted by TechnicalCommittee PEL/17, Switchgear, controlgear, and HV-LV co-ordination, toSubcommittee PEL/17/2, Low voltage switchgear and controlgear.A list of organizations represented on this committee can be obtained onrequest
4、to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2013.Published by BSI Standards Limited 2013ISBN 978 0 580 65456 5ICS 29.130.20Compliance with a British Stand
5、ard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 December 2013.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 60947-5-3:2013Copyright European Committee
6、for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EUROPEAN STANDARD EN 60947-5-3 NORME EUROPENNE EUROPISCHE NORM November 2013 CENELEC European Committee for Electrotechnical Standardizati
7、on Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60947-5-3:
8、2013 E ICS 29.130.20 Supersedes EN 60947-5-3:1999 + A1:2005 English version Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) (IEC 60947-5-3:2013) Appareillage ba
9、sse tension - Partie 5-3: Appareils et lments de commutation pour circuits de commande - Exigences pour dispositifs de dtection de proximit comportement dfini dans des conditions de dfaut (PDDB) (CEI 60947-5-3:2013) Niederspannungsschaltgerte - Teil 5-3: Steuergerte und Schaltelemente - Anforderunge
10、n fr Nherungsschalter mit definiertem Verhalten unter Fehlerbedingungen (PDDB) (IEC 60947-5-3:2013) This European Standard was approved by CENELEC on 2013-09-10. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Stan
11、dard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (En
12、glish, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees
13、of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Sloveni
14、a, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 60947-5-3:2013Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 60947-5-3:2013 - 2 - For
15、eword The text of document 17B/1821/FDIS, future edition 2 of IEC 60947-5-3, prepared by SC 17B “Low-voltage switchgear and controlgear“ of IEC/TC 17 “Switchgear and controlgear“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60947-5-3:2013. The following dates are fixe
16、d: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2014-06-10 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2016-09-10 This document supersedes EN
17、 60947-5-3:1999. EN 60947-5-3:2013 includes the following significant technical changes with respect to EN 60947-5-3:1999: a) general principles of EN 61508 series; b) classification according to the requirements of EN 62061; c) classification according to EN ISO 13849-1. This European Standard is t
18、o be read in conjunction with EN 60947-1, Low-voltage switchgear and controlgear Part 1: General rules and EN 60947-5-2, Low-voltage switchgear and controlgear Part 5-2: Control circuit devices and switching elements - Proximity switches. The provisions of Part 1 and Part 5-2 are only applicable to
19、this European Standard where specifically called for. The numbering of the subclauses of this European Standard is sometimes not continuous because it is based on the numbering of the subclauses of EN 60947-1 or EN 60947-5-2. Attention is drawn to the possibility that some of the elements of this do
20、cument may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association, and supports essential requ
21、irements of EU Directive(s). For the relationship with EU Directive(s), see informative Annex ZZ, which is an integral part of this document. This European Standard does not deal with any specific requirements on noise as the noise emission of control circuit devices and switching elements is not co
22、nsidered to be a relevant hazard. BS EN 60947-5-3:2013Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- 3 - EN 60947-5-3:2013 Endorsement notice The text of t
23、he International Standard IEC 60947-5-3:2013 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60068-2-6:2007 NOTE Harmonized as EN 60068-2-6:2008 (not modified). I
24、EC 60068-2-14:2009 NOTE Harmonized as EN 60068-2-14:2009 (not modified). IEC 60068-2-27:2008 NOTE Harmonized as EN 60068-2-27:2009 (not modified). IEC 60204-1:2005 A1:2008 NOTE Harmonized as EN 60204-1:2006 (modified) and EN 60204-1:2006/A1:2009 (not modified). IEC 60364 NOTE Harmonized in HD 384 /
25、HD 60364 series (partially modified). IEC 60445:2010 NOTE Harmonized as EN 60445:2010 (not modified). IEC 60947-5-6:1999 NOTE Harmonized as EN 60947-5-6:2000 (not modified). IEC 61000-3-2:2005 A1:2008 A2:2009 NOTE Harmonized as EN 61000-3-2:2006 (not modified), EN 61000-3-2:2006/A1:2009 (not modifie
26、d) and EN 61000-3-2:2006/A2:2009 (not modified). IEC 61000-3-3:2008 NOTE Harmonized as EN 61000-3-3:2008 (not modified). IEC 61000-4-13:2002 A1:2009 NOTE Harmonized as EN 61000-4-13:2002 (not modified) and EN 61000-4-13:2002/A1:2009 (not modified). IEC 61140:2001 A1:2004 NOTE Harmonized as EN 61140:
27、2002 (not modified) and EN 61140:2002/A1:2006 (modified). IEC 61165:2006 NOTE Harmonized as EN 61165:2006 (not modified). IEC 61326-3-1:2008 NOTE Harmonized as EN 61326-3-1:2008 (not modified). IEC 61496-1:2012 NOTE Harmonized as EN 61496-1:201X 1). IEC 61496-2:2013 NOTE Harmonized as EN 61496-2:201
28、X 2)(not modified). IEC 61496-3:2008 NOTE Harmonized as CLC/TS 61496-3:2008 (not modified). IEC 61508-4:2010 NOTE Harmonized as EN 61508-4:2010 (not modified). IEC 61508-5:2010 NOTE Harmonized as EN 61508-5:2010 (not modified). IEC 61508-6:2010 NOTE Harmonized as EN 61508-6:2010 (not modified). IEC
29、61508-7:2010 NOTE Harmonized as EN 61508-7:2010 (not modified). 1) At draft stage. 2) To be published. BS EN 60947-5-3:2013Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license
30、 from IHS-,-,-EN 60947-5-3:2013 - 4 - IEC 61511 NOTE Harmonized in EN 61511 series (not modified). IEC 61511-1:2003 NOTE Harmonized as EN 61511-1:2004 (not modified). IEC 61511-2:2003 NOTE Harmonized as EN 61511-2:2004 (not modified). IEC 61511-3:2003 NOTE Harmonized as EN 61511-3:2004 (not modified
31、). CISPR 11:2009 A1:2010 NOTE Harmonized as EN 55011:2009 (modified) and EN 55011:2009/A1:2010 (not modified). BS EN 60947-5-3:2013Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without
32、 license from IHS-,-,- 5 - EN 60947-5-3:2013 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For
33、 dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Y
34、ear Title EN/HD Year IEC 60068-2-1 2007 Environmental testing - Part 2-1: Tests - Test A: Cold EN 60068-2-1 2007 IEC 60068-2-30 2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) EN 60068-2-30 2005 IEC 60529 - + A1 1989 - 1999 Degrees of protection provide
35、d by enclosures (IP Code) EN 60529 + corr. May + A1 1991 1993 2000 IEC 60947-1 + A1 2007 2010 Low-voltage switchgear and controlgear - Part 1: General rules EN 60947-1 + A1 2007 2011 IEC 60947-5-1 - + A1 2003 - 2009 Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switc
36、hing elements - Electromechanical control circuit devices EN 60947-5-1 + corr. July + A1 2004 2005 2009 IEC 60947-5-2 + A1 2007 2012 Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches EN 60947-5-2 + A1 2007 2012 IEC 61000-4-2 2008 E
37、lectromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test EN 61000-4-2 2009 IEC 61000-4-3 + A1 + A2 2006 2007 2010 Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electroma
38、gnetic field immunity test EN 61000-4-3 + A1 + A2 2006 2008 2010 IEC 61000-4-4 2012 Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test EN 61000-4-4 2012 IEC 61000-4-5 + corr. October 2005 2009 Electromagnetic compatibili
39、ty (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test EN 61000-4-5 2006 IEC 61000-4-6 2008 Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields EN 61000-4-6 2009 BS EN 60947-
40、5-3:2013Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 60947-5-3:2013 - 6 - Publication Year Title EN/HD Year IEC 61000-4-8 2009 Electromagnetic compatib
41、ility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test EN 61000-4-8 2010 IEC 61000-4-11 2004 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity test
42、s EN 61000-4-11 2004 IEC 61131-2 2007 Programmable controllers - Part 2: Equipment requirements and tests EN 61131-2 3)2007 IEC 61508-1 2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements EN 61508-1 2010 IEC 61508-2 2010 Funct
43、ional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems EN 61508-2 2010 IEC 61508-3 2010 Functional safety of electrical/electronic/programmable electronic safety-related syst
44、ems - Part 3: Software requirements EN 61508-3 2010 IEC 62061 + corr. July + corr. April + A1 2005 2005 2008 2012 Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems EN 62061 + corr. February - + A1 2005 2010 - 2013 ISO 13849-1
45、 2006 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design - - 3) EN 61131-2 is superseded by EN 61010-2-201:2013, which is based on IEC 61010-2-201:2013. BS EN 60947-5-3:2013Copyright European Committee for Electrotechnical Standardization Provided b
46、y IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- 7 - EN 60947-5-3:2013 Annex ZZ (informative) Coverage of Essential Requirements of EC Directives This European Standard has been prepared under a mandate given to CENELEC by the Europe
47、an Commission and the European Free Trade Association to provide one means of conforming to Essential Requirements of the New Approach Directive for machinery 2006/42/EC. Once this standard is cited in the Official Journal of the European Union under that Directive, compliance with the normative cla
48、uses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with essential requirements as given in Annex I, 1.2.1 of that Directive and associated EFTA regulations. WARNING: Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard. BS EN 60947-5-3:2013Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- 2 60947-5-3 IEC:2013 CONTENT
