1、BSI Standards PublicationMaritime navigation and radiocommunication equipmentand systems Electronic chartdisplay and information system(ECDIS) Operational and performance requirements, methods of testing and required test resultsBS EN 61174:2015National forewordThis British Standard is the UK implem
2、entation of EN 61174:2015. It is identical to IEC 61174:2015. It supersedes BS EN 61174:2008, which will bewithdrawn on 23 September 2018.The UK participation in its preparation was entrusted to TechnicalCommittee EPL/80, Maritime navigation and radiocommunication equipment and systems.A list of org
3、anizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 201
4、5ISBN 978 0 580 81529 4ICS 47.020.70Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 November 2015.Amendments/corrigenda issued since publicationDate Text affect
5、edBRITISH STANDARDBS EN 61174:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61174 November 2015 ICS 47.020.70 Supersedes EN 61174:2008 English Version Maritime navigation and radiocommunication equipment and systems - Electronic chart display and information system (ECDIS) - Operational a
6、nd performance requirements, methods of testing and required test results (IEC 61174:2015) Matriels et systmes de navigation et de radiocommunication maritimes - Systmes de visualisation des cartes lectroniques et dinformation (ECDIS) - Exigences dexploitation et de fonctionnement, mthodes dessai et
7、 rsultats dessai exigs (IEC 61174:2015) Navigations- und Funkkommunikationsgerte und -systeme fr die Seeschifffahrt - Elektronisches Kartendarstellungs- und Informationssystem (ECDIS) - Betriebs- und Leistungsanforderungen, Prfverfahren und geforderte Prfergebnisse (IEC 61174:2015) This European Sta
8、ndard was approved by CENELEC on 2015-09-23. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concer
9、ning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC mem
10、ber into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republ
11、ic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
12、 Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61174:2015 E BS
13、EN 61174:2015EN 61174:2015 2 European foreword The text of document 80/761/FDIS, future edition 4 of IEC 61174, prepared by IEC/TC 80 “Maritime navigation and radiocommunication equipment and systems“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61174:2015. The follow
14、ing dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-06-23 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-09-23 This docu
15、ment supersedes EN 61174:2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standa
16、rd IEC 61174:2015 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61162 series NOTE Harmonized in EN 61162 series IEC 61162-2:1998 NOTE Harmonized as EN 61162-2:1
17、998 (not modified). IEC 61162-3 NOTE Harmonized as EN 61162-3. IEC 61162-460 NOTE Harmonized as EN 61162-460. IEC 61966-4:2000 NOTE Harmonized as EN 61966-4:2000 (not modified). IEC 62616:2010 NOTE Harmonized as EN 62616:2010 (not modified). ISO 9001 NOTE Harmonized as EN ISO 9001. ISO 9241-12 NOTE
18、Harmonized as EN ISO 9241-12. BS EN 61174:2015EN 61174:2015 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its
19、 application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD app
20、lies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60945 - Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and
21、required test results EN 60945 - IEC 61162-1 - Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners EN 61162-1 - IEC 61162-450 2011 Maritime navigation and radiocommunication equipment and systems - Digital interfaces -
22、Part 450: Multiple talkers and multiple listeners - Ethernet interconnection EN 61162-450 2011 IEC 61924-2 2012 Maritime navigation and radiocommunication equipment and systems - Integrated navigation systems - Part 2: Modular structure for INS - Operational and performance requirements, methods of
23、testing and required test results EN 61924-2 2013 IEC 61996-1 2013 Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - Part 1: Performance requirements, methods of testing and required test results EN 61996-1 2013 BS EN 61174:2015EN 61174:2015 4
24、Publication Year Title EN/HD Year IEC 62288 2014 Maritime navigation and radiocommunication equipment and systems - Presentation of navigation-related information on shipborne navigational displays - General requirements, methods of testing and required test results EN 62288 2014 IEC 62388 2013 Mari
25、time navigation and radiocommunication equipment and systems - Shipborne radar - Performance requirements, methods of testing and required test results EN 62388 2013 ISO 8601 - Data elements and interchange formats - Information interchange - Representation of dates and times - - IHO M-3 2007 Resolu
26、tions of the IHO, Chapter A, Section 3, Technical Resolution 3.11 - - IHO S-52 Annex A 2014 IHO Presentation Library for ECDIS - - IHO S-52 appendix 1 2012 Guidance on updating the electronic navigational chart - - IHO S-52 2014 Specifications for Chart Content and Display Aspects of ECDIS - - IHO S
27、-57 appendix B.1 - ENC product specification - - IHO S-57 - Transfer standard for digital hydrographic data - - IHO S-61 1999 Product specification for raster navigational charts (RNC) - - IHO S-63 - IHO data protection scheme - - IHO S-64 - Test data sets for ECDIS - - IMO A.694(17) 1991 General re
28、quirements for shipborne radio equipment forming part of the global maritime distress and safety system (GMDSS) and for electronic navigational aids - - IMO MSC.191(79) 2004 Performance standards for the presentation of navigation-related information on shipborne navigational displays - - IMO MSC.23
29、2(82) 2006 Adoption of the revised performance standards for electronic chart display and information systems (ECDIS) - - IMO MSC.252(83) - Performance standards for integrated navigation systems (INS) - - IMO MSC/Circular 982 2000 Guidelines on ergonomic criteria for bridge equipment and layout - -
30、 IMO SN.1/Circular 266 2007 Maintenance of electronic chart display and information system (ECDIS) software - - IMO SOLAS Convention for safety of life at sea (SOLAS) - - BS EN 61174:2015 2 IEC 61174:2015 IEC 2015 CONTENTS FOREWORD . 12 1 Scope 14 2 Normative references 14 3 Terms, definitions and a
31、bbreviations . 16 3.1 Terms and definitions 16 3.2 Abbreviations 21 4 Minimum operational and performance requirements . 22 4.1 General . 22 4.2 ECDIS definitions 23 4.3 Display of SENC information . 23 4.3.1 SENC 23 4.3.2 Indication about use of non-HO source 23 4.3.3 Categories of display . 23 4.3
32、.4 Safety contour . 24 4.3.5 Safety depth 25 4.3.6 Information content 25 4.3.7 Verification and updates 25 4.3.8 Information about chart objects 25 4.3.9 Display scale . 25 4.4 Provision and updating of chart information 25 4.4.1 Contents of the SENC 25 4.4.2 Updates . 26 4.5 Scale 26 4.6 Display o
33、f other navigational information . 26 4.6.1 General for all overlays 26 4.6.2 Radar information 27 4.6.3 AIS information 30 4.6.4 AIS target data. 32 4.6.5 AIS voyage-related data 33 4.6.6 AIS CPA/TCPA alarms . 33 4.6.7 AIS lost target warning . 34 4.6.8 Anchor watch . 34 4.7 Display mode and genera
34、tion of the neighbouring area . 35 4.8 Colours and symbols. 35 4.9 Display requirements 36 4.9.1 Route planning and monitoring 36 4.9.2 Chart presentation size 36 4.9.3 Colour and resolution . 36 4.9.4 Presentation 36 4.9.5 Removal of information categories . 36 4.10 Route planning, monitoring and v
35、oyage recording . 36 4.10.1 General 36 4.10.2 Route planning 37 4.10.3 Route monitoring . 38 4.10.4 Position integration 40 4.10.5 Object information 41 BS EN 61174:2015IEC 61174:2015 IEC 2015 3 4.10.6 LOP position fix . 41 4.10.7 Voyage recording . 41 4.11 Calculations and accuracy 42 4.12 Connecti
36、ons with other equipment (interfaces) 42 4.12.1 Connection with navigation equipment . 42 4.12.2 Connection with BAM . 42 4.12.3 Connection with VDR . 43 4.12.4 Connection with BNWAS 44 4.12.5 Connection for SENC information 44 4.12.6 Connection with NAVTEX or SafetyNET for MSI 44 4.12.7 Connection
37、for transfer of route information . 45 4.12.8 Connection with INS 46 4.13 Performance tests, malfunction alerts and indications . 46 4.14 Back-up arrangements 46 4.15 Power supply 46 4.16 Software maintenance 46 4.17 Quality management requirements 47 4.18 Default control setting and saved user cont
38、rol settings 47 5 Requirements contained in IHO publications 49 5.1 Priority of chart display . 49 5.2 Display of chart information 50 5.2.1 Scale and navigation purpose 50 5.2.2 Units and legend 50 5.2.3 Terminology . 51 5.3 Display functions 51 5.3.1 Cursor pick 51 5.3.2 Navigational information 5
39、1 5.3.3 Date-dependant ENC objects . 52 5.4 Supplementary display functions . 52 5.4.1 Additional mariners information . 52 5.4.2 Additional non-HO information . 52 5.4.3 Tidal adjustment 53 5.5 Use of the presentation library 53 5.5.1 Presentation library 53 5.5.2 Test diagrams 53 5.6 Display chara
40、cteristics 53 5.7 Performance requirements 54 5.7.1 Redraw 54 5.7.2 Resolution . 54 5.7.3 Symbols . 54 5.7.4 Number of colours . 55 5.7.5 Brightness and contrast . 55 5.8 Ergonomic requirements . 55 5.8.1 Mode and orientation . 55 5.8.2 Windows 55 5.9 Update of chart information . 56 5.9.1 General 5
41、6 5.9.2 Manual update . 57 5.9.3 Semi-automatic update 58 BS EN 61174:2015 4 IEC 61174:2015 IEC 2015 5.9.4 Reception of updates . 58 5.9.5 Sequence check 58 5.9.6 Consistency check . 59 5.9.7 Geographic applicability . 59 5.9.8 Summary report . 59 5.9.9 Review of ENC updates . 59 5.9.10 Modification
42、 of updates 59 5.10 Operational area . 59 5.11 External removable media . 60 6 Methods of testing and required test results 60 6.1 EUT installation, technical documentation, and test requirements . 60 6.2 Interfaces 60 6.2.1 General 60 6.2.2 BAM interface 61 6.2.3 VDR interface 62 6.2.4 BNWAS interf
43、ace . 63 6.3 General requirements and presentation requirements . 63 6.3.1 General requirements 63 6.3.2 Presentation requirements . 63 6.4 Preparation . 63 6.4.1 Power-up . 63 6.4.2 Initial ship parameters 64 6.4.3 Required test items 64 6.5 Requirements related to ENC chart . 64 6.5.1 General 64 6
44、.5.2 Presentation library 65 6.5.3 ENC . 65 6.5.4 Encrypted ENC 65 6.6 Accuracy . 65 6.7 Visual requirements 65 6.7.1 Symbols . 65 6.7.2 Terminology, units and legend . 65 6.7.3 Colour table . 65 6.7.4 Resolution . 66 6.7.5 Display characteristics . 66 6.8 Functional requirements 66 6.8.1 Methods of
45、 testing . 66 6.8.2 Standard display 66 6.8.3 Display base 66 6.8.4 All other information . 67 6.8.5 Viewing group layers and text group layers 67 6.8.6 Display priorities 67 6.8.7 Additional display functions 67 6.8.8 Scale and navigation purpose 67 6.8.9 Mode and orientation . 68 6.8.10 Safety con
46、tour . 68 6.8.11 Safety depth 68 6.8.12 Cursor pick 68 6.8.13 Navigation related functions . 68 BS EN 61174:2015IEC 61174:2015 IEC 2015 5 6.8.14 Position integration 69 6.8.15 Radar and other navigational information . 69 6.8.16 Loading of corrupted data 72 6.8.17 Automatic updates . 72 6.8.18 Manua
47、l updates . 73 6.8.19 Self-tests of major functions . 73 6.8.20 Operational area 73 6.8.21 External removable media 74 6.9 Operational requirements 74 6.9.1 Ergonomic principles 74 6.9.2 Route planning 74 6.9.3 Route monitoring . 76 6.9.4 Twelve hour log . 78 6.9.5 Voyage record . 78 6.9.6 Power sup
48、ply . 78 6.9.7 LOP position fix . 78 6.10 Software maintenance 79 6.11 Quality management . 79 6.12 Default control setting and saved operator control settings . 80 6.13 AIS information and AIS target data 80 6.13.1 General 80 6.13.2 AIS targets and data report capacity 80 6.13.3 AIS target filterin
49、g 80 6.13.4 Activation and deactivation of AIS targets 81 6.13.5 AIS functionality and presentation 81 6.13.6 AIS target data. 82 6.13.7 AIS CPA/TCPA alarm. 83 6.13.8 AIS lost target warning . 83 6.14 AIS Voyage-related data . 84 6.15 Anchor watch 84 6.16 NAVTEX and SafetyNET for MSI . 85 6.17 Interface for transfer of route information 85 6.18 Interface with INS . 86 Annex A (normative) SENC information to be displayed during route planning and route monitoring 87 Annex B (normative) Navigation
