1、BRITISH STANDARD BS EN 61196-3-3:1998 IEC 61196-3-3: 1997 Radio frequency cables Part 3-3: Coaxial cables for digital communication in horizontal floor wiring Detail specification for coaxial cables with foamed dielectric for local area networks of185m reach and up to10Mb/s The European Standard EN
2、61196-3-3:1997 has the status of a British Standard ICS 33.120.10BSEN61196-3-3:1998 This British Standard, having been prepared under the directionof the Electrotechnical Sector Board, was published underthe authority of the Standards Board and comes into effect on 15 February 1998 BSI 04-1999 ISBN
3、0 580 29117 0 National foreword This British Standard is the English language version of EN61196-3-3:1997. It is identical with IEC61196-3-3:1997. The UK participation in its preparation was entrusted by Technical Committee EPL/46, Cables, wires, waveguides, RF connectors, and accessories for commun
4、ication and signalling, to Subcomittee EPL/46/1, LF communication cables and wires, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interes
5、ts informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this subcommittee can be obtained on request to its secretary. From 1 January 1997, all IEC publications have the number60000 added to the old number. For instan
6、ce, IEC27-1 has been renumbered as IEC60027-1. For a period of time during the change over from one numbering system to the other, publications may contain identifiers from both systems. Cross-references Attention is drawn to the fact that CEN and CENELEC Standards normally include an annex which li
7、sts normative references to international publications with their corresponding European publications. The British Standards which implement international or European publications may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, o
8、r by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer
9、immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, theEN title page, pages 2 to 7 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the
10、 amendment table on the inside front cover. Amendments issued since publication Amd. No. Date CommentsBSEN61196-3-3:1998 BSI 04-1999 i Contents Page National foreword Inside front cover Foreword 2 Text of EN 61196-3-3 3 Figure 1 Maximum transfer impedance 7ii blankEUROPEAN STANDARD NORME EUROPENNE E
11、UROPISCHE NORM EN 61196-3-3 November 1997 ICS 33.120.10 English version Radio frequency cables Part 3-3: Coaxial cables for digitalcommunication in horizontal floor wiring Detail specification for coaxial cables with foamed dielectric for local area networks of185m reach and up to10Mb/s (IEC61196-3-
12、3:1997) Cbles pour frquences radiolectriques Partie3-3: Cbles caoxiaux pour transmission numrique dstins au cblagehorizontal des immeubles Spcification particulire pour les cbles coaxiaux avec dilectrique expans pourrseaux locaux jusqu 185m, et de dbitmaximal10 Mb/s (CEI61196-3-3:1997) Hochfrequenzk
13、abel Teil3-3: Koaxialkabel fr Etagenverkabelungin der digitalen Kommunikation Bauartspezifikation fr Koaxialkabel mit geschumtem Dielektrikumfr lokale Netze mit 185m Reichweite und bis 10Mb/s (IEC61196-3-3:1997) This European Standard was approved by CENELEC on 1997-10-01. CENELEC members are bound
14、to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Cent
15、ral Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same st
16、atus as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC Europ
17、ean Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1997 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CEN
18、ELEC members. Ref. No. EN 61196-3-3:1997 EEN61196-3-3:1997 2 BSI 04-1999 Foreword The text of document 46A/290/FDIS, future edition1 of IEC61196-3-3, prepared by SC46A, Coaxial cables, of IECTC46, Cables, wires, waveguides, R.F. connectors, and accessories for communication and signalling, was submi
19、tted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN61196-3-3 on1997-10-01. The following dates were fixed: Endorsement notice The text of the International Standard IEC61196-3-3:1997 was approved by CENELEC asa European Standard without any modification. latest date by which the
20、EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 1998-07-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 1998-07-01EN61196-3-3:1997 BSI 04-1999 31 Elabor par/ Prepared by: SC46A/WG3 2
21、 Document No: Indice/Issue Date: CEI/IEC 61196-3-3 Mars/March 1997 3 Disponible / Available from: : 4 Spcification gnrique/ Generic specification CEI/IEC 61196-1 Spcification intermdiaire/ Sectional specification CEI/IEC 61196-3 Spcification particulire/ Detail specification CEI/IEC 61196-3-3 5 Rfre
22、nces complmentaires/Additional references: Les cbles satisfaisant cette spcification sont compatibles avec la connectique et les performances exiges par le systme dans les applications10BASE2 dcrites dans lISO/CEI8802-3 (1996). Cables meeting this specification are compatible with the connectorizati
23、on and system performance requirements of10 BASE2 applications described in ISO/IEC8802-3 (1996). 6 Titre/Title: Cbles pour frquences radiolectriques Partie3-3: Cbles coaxiaux pour transmission numrique destins au cblage horizontal des immeubles Spcification particulire pour les cbles coaxiaux avec
24、dilectrique expans pour rseaux locaux jusqu 185 m et de dbit maximal de10Mb/s. Radio frequency cables Part3-3: Coaxial cables for digital communication in horizontal floor wiring Detail specification for coaxial cables with foamed dielectric for local area networks of 185 m reach and up to 10 Mb/s.
25、7 Construction du cble/Cable construction: Conducteur/Conductor Matriau/Material: Nombre de brins/Number of strands: Diamtre/Diameter: cuivre tam/tinned copper 19 1,00 mm 0,07 mm Matriau dilectrique/Dielectric material Matriau/Material: Excentricit/Eccentricity: Ovalisation/Ovality: Diamtre/Diameter
26、: polythylne expans/foamed polyethylene 8 % max. 5 % max 2,65 mm 0,15 mmEN61196-3-3:1997 4 BSI 04-1999 7 Construction du cble/Cable construction (suite/continued): Conducteur extrieur/outer conductor Couche/Layer: Type/Type: Matriau/Material: 1 ruban/tape Al-polymre, face aluminium vers la couche 2,
27、 ou Al-polymre-Al; avec ou sans adhsif/ Al-polymer with aluminium surface faced to layer 2, or Al-polymer-Al; with or without adhesive. Recouvrement minimal/Minimum overlap: Couche/Layer: Type/Type: Matriau/Material: Diamtre du fil/Strand diameter: Facteur de remplissage/Filling factor: 20 % 2 tress
28、e/braid cuivre tam/tinned copper 0,13 mm 0,02 mm non spcifi/not specified Gaine/Sheath Matriau/Material: Excentricit/Eccentricity: Ovalisation/Ovality: Epaisseur minimale/Minimum thickness: Couleur/Colour: Diamtre sur gaine/Overall diameter: Marquage/Marking: PCV/PVC 5 % max. 5 % max. 0,5 mm non spc
29、ifi/not specified 4,7 mm 0,3 mm “Fabrication de cble/cable manufacturing CEI/IEC 61196-3-3” 8 Renseignements techniques/Engineering information: Connecteur/Connector type: Masse/Mass: Rayon de courbure/Bending radius: Capacit linique/Capacitance: Tension de service/Voltage rating: CEI/IEC 60169-8 (B
30、NC) 3,9 kg/100 m (nominal) 50 mm (min.) 82 pF/m (nominal) 30 V (max.)EN61196-3-3:1997 BSI 04-1999 5 9 Valeurs et caractristiques respecter/ Inspection values, ratings or characteristics 10 Paragraphe/ Subclause a 11 Valeur/ Value 12 Remarques/ Remarks Intgrit lectrique/Electrical integrity Tension d
31、e tenue de la gaine (essai sec)/ Sheath spark test 11.6 3,0 kV (Valeur efficace/r.m.s.) Tension de tenue du dilectrique/ Dielectric withstand voltage 11.5 1,0 kV (Valeur efficace/r.m.s.) Rsistance disolement/ Insulation resistance 11.2 5000 M7-km Tension/Voltage 100 /to 500 V dure/duration 1 min. Tr
32、ansmission/Transmission Impdance caractristique/ Characteristic impedance 11.8 50 7 27 10 MHz Rsistance du conducteur extrieur/ Outer conductor resistance 11.1 15 7/km (max.) Temperature: 20C Rsistance en boucle/Loop DCR 11.1 50 7/km (max.) Temperature: 20C Affaiblissement/Attenuation 11.13 3,24 dB/
33、100 m (max.) 4,59 dB/100 m (max.) 5 MHz 10 MHz Affaiblissement aprs vieillissement/ Attenuation after ageing A ltude/ under study Vitesse relative de propagation/ Velocity ratio 11.9 0,80 (min.) Impdance de transfert de surface/ Surface transfer impedance 12.1 Voir Figure 1/ See Figure 1 Maximum Fig
34、ure 1 Attnuation du blindage/ Screening attenuation 12.4 Non spcifi/ Not specified Affaiblissement de rflexion/ Return loss 11.12 Non spcifi/ Not specified a CEI/IEC 61196-1EN61196-3-3:1997 6 BSI 04-1999 9 Valeurs et caractristiques respecter/ Inspection values, ratings or characteristics (suite/con
35、tinued) 10 Paragraphe/ Subclause a 11 Valeur/ Value 12 Remarques/ Remarks Mchanique/Mechanical Allongement aprs la rupture du conducteur interieur/ Elongation after break of the inner conductor 9.5 15 % (min.) Allongement la rupture de lenveloppe isolante/Elongation at break of the insulation 9.5 No
36、n applicable/ Not applicable Allongement la rupture de la gaine/ Elongation at break of the sheath 9.5 100 % (min.) Charge de rupture de la gaine/ Tensile strength at break of the sheath 9.5 12,5 MPa (min.) Environnement/Environmental Allongement la rupture de la gaine aprs vieillissement/ Elongatio
37、n at break of the sheath after ageing 9.5 50 % Rtention minimale de la valeur initiale aprs sept jours 100C/ Minimum retention of the unaged value after seven days at 100C Charge de rupture de la gaine aprs vieillissement/ Tensile strength at break of the sheath after ageing 9.5 70 % Rtention minima
38、le de la valeur initiale aprs sept jours 100C/ Minimum retention of the unaged value after seven days at 100C Essai denroulement basse temprature pour le cble/ Bending test at low temperature for the cable 10.3 Pas de dtrioration/ No damage 50 mm (diamtre du mandrin/mandrel diameter) Temprature: 20C
39、 Temperature: 20C Essai de rayon de courbure temprature ambiante/ Bending test at room temperature 10.2 Pas de dtrioration/ No damage Essai au feu sur cble vertical/ Test under fire conditions on a vertical cable 8.1.3.2 Passe/Pass CEI/IEC 60332-1 Fume, toxicit, halognes/ Smoke, toxicity, halogens N
40、on applicable/ Not applicable 13 Assurance de qualit/Quality assurance A ltude/under consideration a CEI/IEC 61196-1EN61196-3-3:1997 BSI 04-1999 7 NOTESpecified by ISO/IEC 8802-3 (1996) Figure 1 Maximum transfer impedanceBS EN 61196-3-3:1998 IEC 61196-3-3: 1997 BSI 389 Chiswick High Road London W4 4
41、AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. User
42、s of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary
43、 of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standar
44、ds Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandar
45、ds, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on al
46、l its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership A
47、dministration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the internationalstandardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be repr
48、oduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size,
49、 type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02
