1、Terrestrial photovoltaic (PV) modules Design qualification and type approvalPart 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) modulesBS EN 61215-1-1:2016Incorporating corrigendum June 2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15
2、:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61215-1-1 June 2016 ICS 27.160 Supersedes EN 61215:2005 (partially) English Version Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-1: Special requirements for testing of crystalline silicon photovoltaic
3、(PV) Modules (IEC 61215-1-1:2016) Modules photovoltaques (PV) pour applications terrestres - Qualification de la conception et homologation - Partie 1-1: Exigences particulires dessai des modules photovoltaques (PV) au silicium cristallin (IEC 61215-1-1:2016) Terrestrische Photovoltaik-(PV-)Module -
4、 Bauarteignung und Bauartzulassung - Part 1-1: Besondere Anforderungen fr das Prfen von kristallinen Silizium-Photovoltaik-(PV )Modulen (IEC 61215-1-1:2016) This European Standard was approved by CENELEC on 2016-04-13. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations whi
5、ch stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. Thi
6、s European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENE
7、LEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherla
8、nds, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centr
9、e: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61215-1-1:2016 E National forewordThis British Standard is the UK implementation of EN 61215-1-1:2016. It is identical to IEC 61215-1-1:2016.
10、Together with BS EN 61215-1:2016, BS EN 61215-1-2, BS EN 61215-1-3, BS EN 61215-1-4 and BS EN 61215-2:2017, it supersedes BS EN 61215:2005, which will be withdrawn upon publication of all remaining parts of the BS EN 61215-1 series.The UK participation in its preparation was entrusted to Technical C
11、ommittee GEL/82, Photovoltaic Energy Systems.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Stand
12、ards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 98104 3ICS 27.160Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2016.Amendm
13、ents/corrigenda issued since publicationDate Text affected30 June 2016 Supersession details in national foreword correct-edBRITISH STANDARDBS EN 61215-1-1:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61215-1-1 June 2016 ICS 27.160 Supersedes EN 61215:2005 (partially) English Version Terr
14、estrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) Modules (IEC 61215-1-1:2016) Modules photovoltaques (PV) pour applications terrestres - Qualification de la conception et homologation - Pa
15、rtie 1-1: Exigences particulires dessai des modules photovoltaques (PV) au silicium cristallin (IEC 61215-1-1:2016) Terrestrische Photovoltaik-(PV-)Module - Bauarteignung und Bauartzulassung - Part 1-1: Besondere Anforderungen fr das Prfen von kristallinen Silizium-Photovoltaik-(PV )Modulen (IEC 612
16、15-1-1:2016) This European Standard was approved by CENELEC on 2016-04-13. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bib
17、liographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the r
18、esponsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, F
19、inland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for El
20、ectrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members
21、. Ref. No. EN 61215-1-1:2016 E BS EN 61215-1-1:20162 European foreword The text of document 82/1047/FDIS, future edition 1 of IEC 61215-1-1, prepared by IEC/TC 82 “Solar photovoltaic energy systems“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61215-1-1:2016. The foll
22、owing dates are fixed: latest date by which the document has to beimplemented at national level bypublication of an identical nationalstandard or by endorsement(dop) 2017-01-13 latest date by which the nationalstandards conflicting with thedocument have to be withdrawn(dow) 2019-04-13 This document
23、supersedes EN 61215:2005 (partially). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International
24、 Standard IEC 61215-1-1:2016 was approved by CENELEC as a European Standard without any modification. EN 61215-1-1:2016 BS EN 61215-1-1:20162 European foreword The text of document 82/1047/FDIS, future edition 1 of IEC 61215-1-1, prepared by IEC/TC 82 “Solar photovoltaic energy systems“ was submitte
25、d to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61215-1-1:2016. The following dates are fixed: latest date by which the document has to beimplemented at national level bypublication of an identical nationalstandard or by endorsement(dop) 2017-01-13 latest date by which the nationals
26、tandards conflicting with thedocument have to be withdrawn(dow) 2019-04-13 This document supersedes EN 61215:2005 (partially). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for id
27、entifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61215-1-1:2016 was approved by CENELEC as a European Standard without any modification. EN 61215-1-1:2016 EN 61215-1-1:2016 3 Annex ZA (normative) Normative references to international publications
28、 with their corresponding European publications Annexes ZA of EN 61215-1:2016 and of EN 61215-2:2016 applies. BS EN 61215-1-1:2016This page deliberately left blank 2 IEC 61215-1-1:2016 IEC 2016 CONTENTS FOREWORD . 3 1 Scope and object . 5 2 Normative references. 5 3 Terms and definitions 5 4 Test sa
29、mples . 5 5 Marking and documentation . 5 6 Testing 5 7 Pass criteria 6 8 Major visual defects . 6 9 Report . 6 10 Modifications . 6 11 Test flow and procedures . 6 11.1 Visual inspection (MQT 01) . 6 11.2 Maximum power determination (MQT 02) . 6 11.3 Insulation test (MQT 03) 6 11.4 Measurement of t
30、emperature coefficients (MQT 04) . 6 11.5 Measurement of nominal module operating temperature (NMOT) (MQT 05) 6 11.6 Performance at STC (MQT 06.1) and NMOT (MQT 06.2) 6 11.7 Performance at low irradiance (MQT 07) 6 11.8 Outdoor exposure test (MQT 08) . 6 11.9 Hot-spot endurance test (MQT 09) . 7 11.
31、9.1 Purpose . 7 11.9.2 Classification of cell interconnection . 7 11.9.3 Apparatus 7 11.9.4 Procedure 7 11.9.5 Final measurements . 7 11.9.6 Requirements 7 11.10 UV preconditioning test (MQT 10) 7 11.11 Thermal cycling test (MQT 11) . 7 11.12 Humidity-freeze test (MQT 12) . 7 11.13 Damp heat test (M
32、QT 13) 7 11.14 Robustness of terminations test (MQT 14) . 7 11.15 Wet leakage current test (MQT 15) 7 11.16 Static mechanical load test (MQT 16) 8 11.17 Hail test (MQT 17) . 8 11.18 Bypass diode thermal test (MQT 18) 8 11.19 Stabilization (MQT 19) . 8 11.19.4 Other stabilization procedures 8 11.19.5
33、 Initial stabilization (MQT 19.1) 8 11.19.6 Final stabilization (MQT 19.2) . 8 2 IEC 61215-1-1:2016 IEC 2016 CONTENTS FOREWORD . 3 1 Scope and object . 5 2 Normative references. 5 3 Terms and definitions 5 4 Test samples . 5 5 Marking and documentation . 5 6 Testing 5 7 Pass criteria 6 8 Major visua
34、l defects . 6 9 Report . 6 10 Modifications . 6 11 Test flow and procedures . 6 11.1 Visual inspection (MQT 01) . 6 11.2 Maximum power determination (MQT 02) . 6 11.3 Insulation test (MQT 03) 6 11.4 Measurement of temperature coefficients (MQT 04) . 6 11.5 Measurement of nominal module operating tem
35、perature (NMOT) (MQT 05) 6 11.6 Performance at STC (MQT 06.1) and NMOT (MQT 06.2) 6 11.7 Performance at low irradiance (MQT 07) 6 11.8 Outdoor exposure test (MQT 08) . 6 11.9 Hot-spot endurance test (MQT 09) . 7 11.9.1 Purpose . 7 11.9.2 Classification of cell interconnection . 7 11.9.3 Apparatus 7
36、11.9.4 Procedure 7 11.9.5 Final measurements . 7 11.9.6 Requirements 7 11.10 UV preconditioning test (MQT 10) 7 11.11 Thermal cycling test (MQT 11) . 7 11.12 Humidity-freeze test (MQT 12) . 7 11.13 Damp heat test (MQT 13) 7 11.14 Robustness of terminations test (MQT 14) . 7 11.15 Wet leakage current
37、 test (MQT 15) 7 11.16 Static mechanical load test (MQT 16) 8 11.17 Hail test (MQT 17) . 8 11.18 Bypass diode thermal test (MQT 18) 8 11.19 Stabilization (MQT 19) . 8 11.19.4 Other stabilization procedures 8 11.19.5 Initial stabilization (MQT 19.1) 8 11.19.6 Final stabilization (MQT 19.2) . 8 BS EN
38、61215-1-1:2016IEC 61215-1-1:2016 IEC 2016 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ TERRESTRIAL PHOTOVOLTAIC (PV) MODULES DESIGN QUALIFICATION AND TYPE APPROVAL Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) modules FOREWORD 1) The International Electrotechni
39、cal Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this
40、end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Co
41、mmittee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in
42、accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from al
43、l interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held r
44、esponsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any diver
45、gence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC m
46、arks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual expe
47、rts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC P
48、ublication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC P
49、ublication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61215-1-1 has been prepared by IEC technical committee 82: Solar photovoltaic energy systems. This edition cancels and replaces the second edition of IEC 61215, issued in 2005, and constitutes a technical revision. This standard is to be read in conjunction with IEC 61215-1:2016 and IEC 61215-2:2016. BS EN 61215-1-1:2016IEC 61215-1-1:2016 IEC 2016 3 INTER
