1、Fibre optic interconnecting devices and passive components Basic test and measurement proceduresPart 2-55: Tests Strength of mounted adaptorBS EN 61300-2-55:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61300
2、-2-55 June 2017 ICS 33.180.20 English Version Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-55: Tests - Strength of mounted adaptor (IEC 61300-2-55:2017) Dispositifs dinterconnexion et composants passifs fibroniques - Procdures fondamenta
3、les dessais et de mesures - Partie 2-55: Essais - Rsistance du raccord mont (IEC 61300-2-55:2017) Lichtwellenleiter Verbindungselemente und passive Bauteile - Grundlegende Prf- und Messverfahren - Teil 2-55: Prfungen - Stabilitt der Befestigung eines montierten Adapters (IEC 61300-2-55:2017) This Eu
4、ropean Standard was approved by CENELEC on 2017-04-13. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical referen
5、ces concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a C
6、ENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugos
7、lav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnic
8、al Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. E
9、N 61300-2-55:2017 E National forewordThis British Standard is the UK implementation of EN 61300-2-55:2017. It is identical to IEC 61300-2-55:2017.The UK participation in its preparation was entrusted to Technical Committee GEL/86/2, Fibre optic interconnecting devices and passive components.A list o
10、f organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limi
11、ted 2017ISBN 978 0 580 92971 7ICS 33.180.20Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2017.Amendments/corrigenda issued since publicationDate Text a
12、ffectedBRITISH STANDARDBS EN 61300-2-55:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61300-2-55 June 2017 ICS 33.180.20 English Version Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-55: Tests - Strength of mounted adaptor (IEC
13、 61300-2-55:2017) Dispositifs dinterconnexion et composants passifs fibroniques - Procdures fondamentales dessais et de mesures - Partie 2-55: Essais - Rsistance du raccord mont (IEC 61300-2-55:2017) Lichtwellenleiter Verbindungselemente und passive Bauteile - Grundlegende Prf- und Messverfahren - T
14、eil 2-55: Prfungen - Stabilitt der Befestigung eines montierten Adapters (IEC 61300-2-55:2017) This European Standard was approved by CENELEC on 2017-04-13. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
15、the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English
16、, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Au
17、stria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slov
18、enia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All
19、rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61300-2-55:2017 E BS EN 61300-2-55:2017EN 61300-2-55:2017 2 European foreword The text of document 86B/4054/FDIS, future edition 1 of IEC 61300-2-55, prepared by SC 86B “Fibre optic interconnectin
20、g devices and passive components“ of IEC/TC 86 “Fibre optics“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61300-2-55:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national
21、 standard or by endorsement (dop) 2018-01-13 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-04-13 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held
22、 responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61300-2-55:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the sta
23、ndard indicated: IEC 61753-1 NOTE Harmonized as EN 61753-1. BS EN 61300-2-55:2017EN 61300-2-55:2017 2 European foreword The text of document 86B/4054/FDIS, future edition 1 of IEC 61300-2-55, prepared by SC 86B “Fibre optic interconnecting devices and passive components“ of IEC/TC 86 “Fibre optics“
24、was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61300-2-55:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-01-13 latest date by wh
25、ich the national standards conflicting with the document have to be withdrawn (dow) 2020-04-13 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. En
26、dorsement notice The text of the International Standard IEC 61300-2-55:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated: IEC 61753-1 NOTE Harmonized as EN 61753-1. EN
27、 61300-2-55:2017 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only th
28、e edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the
29、latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 61300-1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance EN 61300-1 - IEC 61300-3
30、-1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-1: Examinations and measurements - Visual examination EN 61300-3-1 - BS EN 61300-2-55:2017This page deliberately left blank 2 IEC 61300-2-55:2017 IEC 2017 CONTENTS FOREWORD . 4 1 Scope 6
31、2 Normative references 6 3 Terms and definitions 6 4 General description . 6 5 Apparatus 6 5.1 Loading method 6 5.1.1 General . 6 5.1.2 Method A . 7 5.1.3 Method B . 7 5.2 Force generator 8 5.3 Force gauge . 8 5.4 Holding fixture 8 5.5 Fixture 8 5.6 Timer 8 6 Procedure 9 6.1 General description . 9
32、6.2 Pre-conditioning 9 6.3 Initial examination and measurement 9 6.4 Mount DUT . 9 6.5 Conditioning 9 6.6 Recovery 9 6.7 Final examination and measurement . 9 7 Severity . 9 8 Details to be specified . 10 Annex A (normative) Fixture information 11 Bibliography 15 Figure 1 Example of test apparatus f
33、or method A . 7 Figure 2 Example of test apparatus for method B . 8 Figure A.1 Fixture cut-out information for SC simplex adaptor 11 Figure A.2 Fixture cut-out information for SC duplex adaptor . 11 Figure A.3 Fixture cut-out information for LC simplex adaptor 12 Figure A.4 Fixture cut-out informati
34、on for LC duplex (square flange) adaptor . 12 Figure A.5 Fixture cut-out information for LC duplex (rectangular flange) adaptor 13 Figure A.6 Fixture cut-out information for LC quad (rectangular flange) adaptor . 13 Figure A.7 Fixture cut-out information for MPO adaptor . 13 Table 1 Recommended seve
35、rity value 9 Table A.1 Dimensions for SC simplex adaptor 11 Table A.2 Dimensions for SC duplex adaptor . 12 Table A.3 Dimensions for LC simplex adaptor 12 Table A.4 Dimensions for LC duplex (square flange) adaptor . 12 2 IEC 61300-2-55:2017 IEC 2017 CONTENTS FOREWORD . 4 1 Scope 6 2 Normative refere
36、nces 6 3 Terms and definitions 6 4 General description . 6 5 Apparatus 6 5.1 Loading method 6 5.1.1 General . 6 5.1.2 Method A . 7 5.1.3 Method B . 7 5.2 Force generator 8 5.3 Force gauge . 8 5.4 Holding fixture 8 5.5 Fixture 8 5.6 Timer 8 6 Procedure 9 6.1 General description . 9 6.2 Pre-conditioni
37、ng 9 6.3 Initial examination and measurement 9 6.4 Mount DUT . 9 6.5 Conditioning 9 6.6 Recovery 9 6.7 Final examination and measurement . 9 7 Severity . 9 8 Details to be specified . 10 Annex A (normative) Fixture information 11 Bibliography 15 Figure 1 Example of test apparatus for method A . 7 Fi
38、gure 2 Example of test apparatus for method B . 8 Figure A.1 Fixture cut-out information for SC simplex adaptor 11 Figure A.2 Fixture cut-out information for SC duplex adaptor . 11 Figure A.3 Fixture cut-out information for LC simplex adaptor 12 Figure A.4 Fixture cut-out information for LC duplex (
39、square flange) adaptor . 12 Figure A.5 Fixture cut-out information for LC duplex (rectangular flange) adaptor 13 Figure A.6 Fixture cut-out information for LC quad (rectangular flange) adaptor . 13 Figure A.7 Fixture cut-out information for MPO adaptor . 13 Table 1 Recommended severity value 9 Table
40、 A.1 Dimensions for SC simplex adaptor 11 Table A.2 Dimensions for SC duplex adaptor . 12 Table A.3 Dimensions for LC simplex adaptor 12 Table A.4 Dimensions for LC duplex (square flange) adaptor . 12 BS EN 61300-2-55:2017IEC 61300-2-55:2017 IEC 2017 3 Table A.5 Dimensions for LC duplex (rectangular
41、 flange) adaptor 13 Table A.6 Dimensions for LC quad (rectangular flange) adaptor . 13 Table A.7 Dimensions for MPO adaptor . 14 BS EN 61300-2-55:2017IEC 61300-2-55:2017 IEC 2017 3 Table A.5 Dimensions for LC duplex (rectangular flange) adaptor 13 Table A.6 Dimensions for LC quad (rectangular flange
42、) adaptor . 13 Table A.7 Dimensions for MPO adaptor . 14 4 IEC 61300-2-55:2017 IEC 2017 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS BASIC TEST AND MEASUREMENT PROCEDURES Part 2-55: Tests Strength of mounted adaptor FOREWORD 1) The Internatio
43、nal Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic
44、 fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; an
45、y IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standard
46、ization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has repre
47、sentation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC
48、 cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional public
49、ations. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) A
