1、BSI Standards PublicationLamp controlgearPart 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modulesBS EN 61347-2-13:2014National forewordThis British Standard is the UK implementation of EN 61347-2-13:2014. It isidentical to IEC 61347-2-13:2014. It supersedes
2、 BS EN 61347-2-13:2006which is withdrawn.The UK participation in its preparation was entrusted by TechnicalCommittee CPL/34, Lamps and Related Equipment, to SubcommitteeCPL/34/3, Auxiliaries for lamps.A list of organizations represented on this committee can be obtained onrequest to its secretary.Th
3、is publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2014.Published by BSI Standards Limited 2014ISBN 978 0 580 75057 1ICS 29.140.99Compliance with a British Standard cannot confer i
4、mmunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 October 2014.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 61347-2-13:2014EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORME
5、N 61347-2-13 October 2014 ICS 29.140.99 Supersedes EN 61347-2-13:2006 English Version Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules (IEC 61347-2-13:2014) Appareillages de lampes - Partie 2-13: Exigences particulires pour les ap
6、pareillages lectroniques aliments en courant continu ou alternatif pour les modules de LED (CEI 61347-2-13:2014) Gerte fr Lampen - Teil 2-13: Besondere Anforderungenan gleich- oder wechselstromversorgte elektronischeBetriebsgerte fr LED-Module (IEC 61347-2-13:2014) This European Standard was approve
7、d by CENELEC on 2014-10-08. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationa
8、l standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own
9、language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, F
10、rance, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de
11、Normalisation ElectrotechniqueEuropisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61347-2-13:2014 E EN 61347-2-13:201
12、4 - 2 - Foreword The text of document 34C/1092/FDIS, future edition 2 of IEC 61347-2-13, prepared by SC 34C, “Auxiliaries for lamps“, of IEC TC 34, “Lamps and related equipment“, was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61347-2-13:2014. The following dates are fix
13、ed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2015-07-08 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2017-10-08 This document supersedes E
14、N 61347-2-13:2006 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This standard covers the Principle Elements of the Safety Objectives
15、 for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC). Endorsement notice The text of the International Standard IEC 61347-2-13:2014 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following
16、 notes have to be added for the standards indicated: IEC 60051 Series NOTE Harmonised in EN 60051 Series. IEC 60085:2004 NOTE Harmonised as EN 60085:2008. IEC 60364-4-41:2005 NOTE Harmonised as HD 60364-4-41:2007. IEC 60384-14:2005 NOTE Harmonised as EN 60384-14:2005. IEC 60950-1:2005 NOTE Harmonise
17、d as EN 60950-1:2006. IEC 61558-1:2005 NOTE Harmonised as EN 61558-1:2005. IEC 61558-2-1:2007 NOTE Harmonised as EN 61558-2-1:2007. IEC 61558-2-4:2009 NOTE Harmonised as EN 61558-2-4:2009. IEC 61558-2-13:2009 NOTE Harmonised as EN 61558-2-13:2009. BS EN 61347-2-13:2014- 3 - EN 61347-2-13:2014 Annex
18、ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies.
19、For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the Eu
20、ropean Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 61347-1 (mod) 2007 Lamp controlgear - Part 1: General and safety requirements EN 61347-1 2008 +A1 2010 +A1 2011 +A2 2012 +A2 2013 IEC 61347-2-7 2011 Lamp controlgear - Part 2-7: Particular
21、requirements for battery supplied electronic controlgear for emergency lighting (self-contained) EN 61347-2-7 2012 IEC 61547 - Equipment for general lighting purposes - EMC immunity requirements EN 61547 - IEC 61558 series - Safety of power transformers, power supplies, reactors and similar products
22、 - Part 1: General requirements and tests EN 61558 series - IEC 61558-2-6 2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporat
23、ing safety isolating transformers EN 61558-2-6 2009 IEC 61558-2-16 2009 Safety of transformers, reactors, power supply units and similar products for voltages up to 1 100 V - Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply
24、 units EN 61558-2-16 2009 IEC 62384 2006 D.C. or A.C. supplied electronic control gear for LED modules - Performance requirements EN 62384 2006 BS EN 61347-2-13:2014 2 IEC 61347-2-13:2014 IEC 2014 CONTENTS INTRODUCTION . 6 1 Scope 7 2 Normative references 7 3 Terms and definitions 8 4 General requir
25、ements 9 5 General notes on tests 10 6 Classification . 10 7 Marking . 10 7.1 Mandatory marking . 10 7.2 Information to be provided if applicable . 10 8 Protection against accidental contact with live parts 10 9 Terminals 10 10 Provisions for protective earthing. 11 11 Moisture resistance and insula
26、tion . 11 12 Electric strength 11 13 Thermal endurance test for windings of ballasts 11 14 Fault conditions . 11 15 Transformer heating 11 15.1 General . 11 15.2 Normal operation 11 15.3 Abnormal operation . 11 16 Construction 12 17 Creepage distances and clearances 12 18 Screws, current-carrying pa
27、rts and connections . 12 19 Resistance to heat, fire and tracking 12 20 Resistance to corrosion . 12 Annex A (normative) Test to establish whether a conductive part is a live part which may cause an electric shock . 13 Annex B (normative) Particular requirements for thermally protected lamp controlg
28、ear . 14 Annex C (normative) Particular requirements for electronic lamp controlgear with means of protection against overheating . 15 Annex D (normative) Requirements for carrying out the heating tests of thermally protected lamp controlgear . 16 Annex E (normative) Use of constant S other than 4 5
29、00 in twtests . 17 Annex F (normative) Draught-proof enclosure 18 Annex G (normative) Explanation of the derivation of the values of pulse voltages 19 Annex H (normative) Tests. 20 Annex I (normative) Particular additional requirements for SELV d.c. or a.c. supplied electronic controlgear for LED mo
30、dules . 21 Annex J (normative) Particular additional safety requirements for a.c., a.c./d.c. or d.c. supplied electronic controlgear for emergency lighting 22 J.1 General . 22 BS EN 61347-2-13:2014IEC 61347-2-13:2014 IEC 2014 3 J.2 Marking . 22 J.2.1 Mandatory markings 22 J.2.2 Information to be pro
31、vided if applicable . 22 J.3 General notes on tests 22 J.4 Starting conditions 23 J.5 Operating condition . 23 J.6 Emergency supply current . 23 J.7 EMC immunity. 23 J.8 Pulse voltage from central battery systems . 23 J.9 Tests for abnormal conditions . 24 J.10 Temperature cycling test and endurance
32、 test 24 J.11 Functional safety (EOFx) 24 Bibliography 25 Table J.1 Pulse voltages 23 BS EN 61347-2-13:2014 6 IEC 61347-2-13:2014 IEC 2014 INTRODUCTION This second edition of IEC 61347-2-13 is published in conjunction with IEC 61347-1. The formatting into separately published parts provides for ease
33、 of future amendments and revisions. Additional requirements will be added as and when a need for them is recognized. This standard and the parts which make up IEC 61347-2, in referring to any of the clauses of IEC 61347-1 specify the extent to which such a clause is applicable and the order in whic
34、h the tests are to be performed; they also include additional requirements as necessary. All parts which make up IEC 61347-2 are self-contained and therefore do not include references to each other. BS EN 61347-2-13:2014IEC 61347-2-13:2014 IEC 2014 7 LAMP CONTROLGEAR Part 2-13: Particular requiremen
35、ts for d.c. or a.c. supplied electronic controlgear for LED modules 1 Scope This part of IEC 61347 specifies particular safety requirements for electronic controlgear for use on d.c. or a.c. supplies up to 1 000 V (a.c. at 50 Hz or 60 Hz) and at an output frequency which can deviate from the supply
36、frequency, associated with LED modules. Controlgear for LED modules specified in this standard are designed to provide constant voltage or current at SELV or higher voltages. Deviations from the pure voltage and current types do not exclude the gear from this standard. The annexes of IEC 61347-1 whi
37、ch are applicable according to this Part 2-13 and using the word “lamp” are understood to also comprise LED modules. Particular requirements for SELV controlgear are given in Annex I. Performance requirements are covered by IEC 62384. Plug-in controlgear, being part of the luminaire, are covered as
38、for built-in controlgear by the additional requirements of the luminaire standard. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For und
39、ated references, the latest edition of the referenced document (including any amendments) applies. IEC 61347-1:2007, Lamp controlgear Part 1: General and safety requirements Amendment 1:2010 Amendment 2:2012 IEC 61347-2-7:2011, Lamp controlgear Part 2-7: Particular requirements for battery supplied
40、electronic controlgear for emergency lighting (self-contained) IEC 61547, Equipment for general lighting purposes EMC immunity requirements IEC 61558 (all parts), Safety of power transformers, power supplies, reactors and similar products IEC 61558-2-6:2009, Safety of transformers, reactors, power s
41、upply units and similar products for supply voltages up to 1 100 V Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers IEC 61558-2-16:2009, Safety of transformers, reactors, power supply units and similar pr
42、oducts for supply voltages up to 1 100 V Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units BS EN 61347-2-13:2014 8 IEC 61347-2-13:2014 IEC 2014 IEC 62384:2006, DC or AC supplied electronic controlgear for LED modules P
43、erformance requirements 3 Terms and definitions For the purpose of this document, the terms and definitions given in IEC 61347-1, as well as the following apply. 3.1 electronic controlgear for LED modules unit inserted between the supply and one or more LED modules which serves to supply the LED mod
44、ule(s) with its (their) rated voltage or rated current Note 1 to entry: The unit may consist of one or more separate components and may include means for dimming, correcting the power factor and suppressing radio interference, and futher control functions. Note 2 to entry: The controlgear consists o
45、f a power supply and a control unit. Note 3 to entry: The controlgear may be partly or totally integrated in the LED module. 3.2 d.c. or a.c. supplied controlgear controlgear that includes stabilising elements for operating one or more LED module(s) 3.3 SELV controlgear controlgear providing an SELV
46、 output isolated from the supply mains by means such as a safety isolating transformer, as specified in IEC 61558-2-6 and IEC 61558-2-16 3.4 associated controlgear controlgear designed to supply specific appliance(s) or equipment, incorporated or not incorporated EXAMPLE: An electronic controlgear w
47、ithin an emergency unit where it is assigned in a one-to-one relation to a battery driven ballast. 3.5 plug-in controlgear controlgear incorporated in an enclosure provided with an integral plug as the means of connection of the electrical supply 3.6 rated output voltage for constant voltage control
48、gear output voltage, at rated supply voltage, rated frequency and at rated output power, assigned to the controlgear 3.7 rated output current for constant current controlgear output current, at rated supply voltage, rated frequency and at rated output power, assigned to the controlgear 3.8 light emi
49、tting diode LED solid state device embodying a p-n junction, emitting optical radiation when excited by an electric current Note 1 to entry: This definition is independent from the existence of enclosure(s) and of terminals. BS EN 61347-2-13:2014IEC 61347-2-13:2014 IEC 2014 9 SOURCE: IEC 60050-845:1987, 845.04.40 3.9 LED module light source having no cap, incorporating one or more LED package(s) on a printed circuit board, and possibly including one or more of the following: electrical, optical, mec
