1、BRITISH STANDARD BS EN 61523-1:2002 IEC 61523-1:2001 Delay and power calculation standards Part 1: Integrated circuit delay and power calculation systems The European Standard EN 61523-1:2001 has the status of a British Standard ICS 31.200; 35.240.50 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMI
2、TTED BY COPYRIGHT LAWBS EN 61523-1:2002 This British Standard, having been prepared under the direction of the Electrotechnical Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 8 March 2002 BSI 8 March 2002 ISBN 0 580 39114 0 N
3、ational foreword This British Standard is the official English language version of EN 61523-1:2001. It is identical with IEC 61523-1:2001 The UK participation in its preparation was entrusted to Technical Committee GEL/93, Design automation, which has the responsibility to: A list of organizations r
4、epresented on this committee can be obtained on request to its secretary. From 1 January 1997, all IEC publications have the number 60000 added to the old number. For instance, IEC 27-1 has been renumbered as IEC 60027-1. For a period of time during the change from one system to the other, publicati
5、ons may contain identifiers from both systems. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using
6、 the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity f
7、rom legal obligations. aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary
8、of pages This document comprises a front cover, an inside front cover, the EN title page, the EN foreword page, pages 1 to 423 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEU
9、ROPEAN STANDARD EN 61523-1 NORME EUROPENNE EUROPISCHE NORM January 2002 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2002 CEN
10、ELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61523-1:2002 E ICS 35.240.50 English version Delay and power calculation standards Part 1: Integrated circuit delay and power calculation systems (IEC 61523-1:2001) Normes de calculs de
11、 puissance et de temps de retard Partie 1: Systmes de calcul de puissance et de temps de retard des circuits intgrs (CEI 61523-1:2001) Berechnung von Verzgerung und Leistungsaufnahme beim Entwurf von Chips Teil 1: System zur Berechnung von Verzgerung und Leistungsaufnahme integrierter Schaltkreise (
12、IC) (IEC 61523-1:2001) This European Standard was approved by CENELEC on 2001-12-04. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lis
13、ts and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the r
14、esponsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland,
15、 Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.Foreword The text of document 93/143/FDIS, future edition 1 of IEC 61523-1, prepared by IEC TC 93, Design automation, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
16、EN 61523-1 on 2001-12-04. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2002-09-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2004-12-01 This standard is based on IEEE Std P1481:1999; IEEE Standard for delay and power calculation systems. _ Endorsement notice The text of the International Standard IEC 61523-1:2001 was approved by CENELEC as a European Standard without any modification. _ BSI8March2002 EN615231:2002
