1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationFibre optic interconnectingdevices and passive components Performance standard Part 057-2: Single mode fibre plug-receptacle style optical fuse for category C Controlled environm
2、entBS EN 61753-057-2:2013National forewordThis British Standard is the UK implementation of EN 61753-057-2:2013. It isidentical to IEC 61753-057-2:2012.The UK participation in its preparation was entrusted by Technical CommitteeGEL/86, Fibre optics, to Subcommittee GEL/86/2, Fibre optic interconnect
3、ingdevices and passive components.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. The British Standards Institut
4、ion 2013Published by BSI Standards Limited 2013ISBN 978 0 580 70067 5ICS 33.180.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 30 April 2013.Amendments issued s
5、ince publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 61753-057-2:2013EUROPEAN STANDARD EN 61753-057-2 NORME EUROPENNE EUROPISCHE NORM March 2013 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrot
6、echnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61753-057-2:2013 E ICS 33.180.20 English version Fibre optic interconnecting devices and passive compone
7、nts - Performance standard - Part 057-2: Single mode fibre plug-receptacle style optical fuse for category C - Controlled environment (IEC 61753-057-2:2012) Dispositifs dinterconnexion et composants passives fibres optiques - Norme de performance - Partie 057-2: Fusible optique du type fiche-embase
8、fibre unimodale pour catgorie C - Environnement contrl (CEI 61753-057-2:2012) Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 057-2: Optische Sicherung fr Einmodenfasern in Steckverbinder-Buchse-Bauform fr die Kategorie C - Kontrollierte Umgebung (IEC 61753-05
9、7-2:2012) This European Standard was approved by CENELEC on 2013-01-09. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and biblio
10、graphical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the resp
11、onsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finl
12、and, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 61753-057-2:2013EN 617
13、53-057-2:2013 - 2 - Foreword The text of document 86B/3501/FDIS, future edition 1 of IEC 61753-057-2, prepared by SC 86B, “Fibre optic interconnecting devices and passive components“, of IEC TC 86, “Fibre optics“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61753-057-
14、2:2013. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2013-10-09 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 20
15、16-01-09 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61753-057-2:201
16、2 was approved by CENELEC as a European Standard without any modification. BS EN 61753-057-2:2013- 3 - EN 61753-057-2:2013 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normativ
17、ely referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by commo
18、n modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60793-2-50 - Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres EN 60793-2-50 - IEC 60869-1 - Fibre optic interconnecting devices and passiv
19、e components - Fibre optic passive power control devices - Part 1: Generic specification EN 60869-1 - IEC 61300-1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance EN 61300-1 - IEC 61300-2-1 - Fibre optic interconnecti
20、ng devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal) EN 61300-2-1 - IEC 61300-2-2 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-2: Tests - Mating durability EN 61300-2-2 -
21、IEC 61300-2-6 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-6: Tests - Tensile strength of coupling mechanism EN 61300-2-6 - IEC 61300-2-9 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedu
22、res - Part 2-9: Tests - Shock EN 61300-2-9 - IEC 61300-2-14 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - High optical power EN 61300-2-14 - IEC 61300-2-17 - Fibre optic interconnecting devices and passive components - Basic
23、 test and measurement procedures - Part 2-17: Tests - Cold EN 61300-2-17 - IEC 61300-2-18 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat - High temperature endurance EN 61300-2-18 - BS EN 61753-057-2:2013EN 61753-057
24、-2:2013 - 4 - Publication Year Title EN/HD Year IEC 61300-2-19 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19: Tests - Damp heat (steady state) EN 61300-2-19 - IEC 61300-2-22 - Fibre optic interconnecting devices and passive component
25、s - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature EN 61300-2-22 - IEC 61300-3-2 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-2: Examinations and measurements - Polarization dependent loss in a single-
26、mode fibre optic device EN 61300-3-2 - IEC 61300-3-3 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-3: Examinations and measurements - Active monitoring of changes in attenuation and return loss EN 61300-3-3 - IEC 61300-3-4 - Fibre optic
27、 interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation EN 61300-3-4 - IEC 61300-3-6 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6: Examinations a
28、nd measurements - Return loss EN 61300-3-6 - IEC 61300-3-7 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7: Examinations and measurements - Wavelength dependence of attenuation and return loss of single mode components EN 61300-3-7 - IE
29、C 61300-3-28 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-28: Examinations and measurements - Transient loss EN 61300-3-28 - IEC 61300-3-32 - Fibre optic interconnecting devices and passive components - Basic test and measurement proce
30、dures - Part 3-32: Examinations and measurements - Polarisation mode dispersion measurement for passive optical components EN 61300-3-32 - IEC 61754 Series Fibre optic connector interfaces EN 61754 Series IEC 61755 Series Fibre optic connector optical interfaces EN 61755 Series IEC/TR 62627-02 2010
31、Fibre optic interconnecting devices and passive components - Part 02: Report of round robin test results on SC plug style fixed attenuators - - BS EN 61753-057-2:2013 2 61753-057-2 IEC:2012(E) CONTENTS INTRODUCTION . 5 1 Scope . 6 2 Normative references . 6 3 Tests 7 4 Test reports 8 5 Performance r
32、equirements . 8 5.1 Sample size, sequencing and grouping 8 5.2 Dimensions . 8 5.3 Test details and requirements . 8 Annex A (normative) Sample size and product sourcing requirements . 16 Annex B (normative) Threshold powers for optical fuses 17 Annex C (normative) Reference connector and adaptor . 1
33、8 Annex D (informative) Example of style configuration for optical fuse . 19 Annex E (normative) Testing of optical fuses . 20 Bibliography 23 Figure D.1 Optical fuse, plug-receptacle style configuration . 19 Figure E.1 Test set-up schematics . 20 Figure E.2 Example of power threshold and blocking a
34、ttenuation at threshold measurements for sample 1280A of an optical fuse 21 Figure E.3 Response time curve of an optical fuse . 21 Figure E.4 Response time testing set-up 22 Table 1 Performance requirements for optical fuses . 8 Table A.1 Sample size and product sourcing requirements 16 Table B.1 Po
35、wers for optical fuses, single-mode 17 Table C.1 Requirements for reference connector and adaptor 18 BS EN 61753-057-2:201361753-057-2 IEC:2012(E) 5 INTRODUCTION The International Electrotechnical Commission (IEC) draws attention to the fact that it is claimed that compliance with this document may
36、involve the use of a patent concerning optical fuse. IEC takes no position concerning the evidence, validity and scope of this patent right. The holder of this patent right has assured the IEC that he/she is willing to negotiate licences either free of charge or under reasonable and non-discriminato
37、ry terms and conditions with applicants throughout the world. In this respect, the statement of the holder of this patent right is registered with IEC. Information may be obtained from: KiloLambda technologies, Ltd. 22a Wallenberg street, Tel-Aviv 69719, Israel Attention is drawn to the possibility
38、that some of the elements of this document may be the subject of patent rights other than those identified above. IEC shall not be held responsible for identifying any or all such patent rights. ISO (www.iso.org/patents) and IEC (http:/patents.iec.ch) maintain on-line data bases of patents relevant
39、to their standards. Users are encouraged to consult the data bases for the most up to date information concerning patents. US patent US-7162,114 B2 “Optical Energy switching device and method“, granted January 9,2007. Japan patent 4376632 “Optical Energy switching device and method“, granted Septemb
40、er 18, 2009 The optical fuse is a passive device, designed to protect equipment and fibre cables from damage due to optical overpower, spikes and surges. The optical fuse produces a controlled, permanent, signal blocking at a predetermined power threshold in an optical fibre transmission line. The o
41、ptical fuse is wavelength independent over its entire specified spectral range. IEC 60869-1 contains the generic information of the optical fuse. The optical fuse has a maximum allowed power input Pin max that is allowed. Beyond this power it is dysfunctional and can let light through. Numerical val
42、ues for Pin max are given in Annex B. BS EN 61753-057-2:2013 6 61753-057-2 IEC:2012(E) FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD Part 057-2: Single mode fibre plug-receptacle style optical fuse for category C Controlled environment 1 Scope This part of IEC 61753
43、 contains the minimum initial test and measurement requirements and severities which a fibre optical fuse satisfies in order to be categorised as meeting the requirements of single mode fibre plug-receptacle style optical fuse used in controlled environments. Optical performance specified in this do
44、cument relate to plug-receptacle style configuration fuses only. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, t
45、he latest edition of the referenced document (including any amendments) applies. IEC 60793-2-50, Optical fibres Part 2-50: Product specifications Sectional specification for class B single-mode fibres IEC 60869-1, Fibre optic interconnecting devices and passive components Fibre optic passive power c
46、ontrol devices Part 1: Generic specification1IEC 61300-1, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 1: General and guidance IEC 61300-2-1, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part
47、 2-1: Tests Vibration (sinusoidal) IEC 61300-2-2, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-2: Tests Mating durability IEC 61300-2-6, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-
48、6: Tests Tensile strength of coupling mechanism IEC 61300-2-9, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-9: Tests Shock IEC 61300-2-14, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part
49、2-14: Tests High optical power1 IEC 61300-2-17, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-17: Tests Cold _ 1To be published. BS EN 61753-057-2:201361753-057-2 IEC:2012(E) 7 IEC 61300-2-18, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-18: Tests Dry heat High temperature endurance IEC 61300-2-19, Fibre optic interco
