1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationFibre optic interconnecting devices and passive components Performance standardPart 086-6: Non-connectorized single-mode bidirectional 1 490 / 1 550 nm downstream and 1 310 nm up
2、stream WWDM devices for category O Uncontrolled environmentBS EN 61753-086-6:2011National forewordThis British Standard is the UK implementation of EN 61753-086-6:2011. It is identical to IEC 61753-086-6:2010.The UK participation in its preparation was entrusted by Technical Committee GEL/86, Fibre
3、optics, to Subcommittee GEL/86/2, Fibre optic interconnecting devices and passive components.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsibl
4、e for its correct application. BSI 2011ISBN 978 0 580 64899 1 ICS 33.180.20Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2011.Amendments issued since pu
5、blicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 61753-086-6:2011EUROPEAN STANDARD EN 61753-086-6 NORME EUROPENNE EUROPISCHE NORM March 2011 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnisc
6、he Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61753-086-6:2011 E ICS 33.180.20 English version Fibre optic interconnecting devices and passive components - P
7、erformance standard - Part 086-6: Non-connectorized single-mode bidirectional 1 490 / 1 550 nm downstream and 1 310 nm upstream WWDM devices for category O - Uncontrolled environment (IEC 61753-086-6:2010) Dispositifs dinterconnexion et composants passifs fibres optiques - Norme de performance - Par
8、tie 086-6: Dispositifs WWDM unimodaux non connectoriss bidirectionnels 1 490 / 1 550 nm en voie descendante et 1 310 nm en voie montante pour la catgorie O - Environnement non contrl (CEI 61753-086-6:2010) Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 086-6:
9、 Nicht mit Steckeverbindern versehene bidirektionale 1 490/1 550-nm-downstream-1 310-nm-upstream-Einmoden-WWDM-Bauteile fr die Kategorie O - Unkontrollierte Umgebung (IEC 61753-086-6:2010) This European Standard was approved by CENELEC on 2011-01-18. CENELEC members are bound to comply with the CEN/
10、CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to a
11、ny CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official ve
12、rsions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portug
13、al, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 61753-086-6:2011EN 61753-086-6:2011 - 2 - Foreword The text of document 86B/3094/FDIS, future edition 1 of IEC 61753-086-6, prepared by SC 86B, Fibre optic interconnecting devices and passive components, of IEC
14、 TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61753-086-6 on 2010-12-27. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for id
15、entifying any or all such patent rights. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2011-09-27 latest date by which the national standards conflicting with the EN have to
16、 be withdrawn (dow) 2013-12-27 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 61753-086-6:2010 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added f
17、or the standard indicated: IEC 62074-1 NOTE Harmonized as EN 62074-1. _ BS EN 61753-086-6:2011- 3 - EN 61753-086-6:2011 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the
18、application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the rele
19、vant EN/HD applies. Publication Year Title EN/HD Year IEC 60793-2-50 - Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres EN 60793-2-50 - IEC 61300-2-1 - Fibre optic interconnecting devices and passive components - Basic test and measurement p
20、rocedures - Part 2-1: Tests - Vibration (sinusoidal) EN 61300-2-1 - IEC 61300-2-4 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention EN 61300-2-4 - IEC 61300-2-5 - Fibre optic interconnecting devices and pass
21、ive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion EN 61300-2-5 - IEC 61300-2-9 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock EN 61300-2-9 - IEC 61300-2-14 - Fibre optic interconnecting d
22、evices and passive components - Basic test and measurement procedures - Part 2-14: Tests - Optical power handling and damage threshold characterization EN 61300-2-14 - IEC 61300-2-19 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19: Tes
23、ts - Damp heat (steady state) EN 61300-2-19 - IEC 61300-2-22 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature EN 61300-2-22 - IEC 61300-2-42 - Fibre optic interconnecting devices and passive components - B
24、asic test and measurement procedures - Part 2-42: Tests - Static side load for connectors EN 61300-2-42 - BS EN 61753-086-6:2011EN 61753-086-6:2011 - 4 - Publication Year Title EN/HD Year IEC 61300-2-44 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedu
25、res - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices EN 61300-2-44 - IEC 61300-2-48 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-48: Tests - Temperature-humidity cycling EN 61300-2-48 - IEC 61300-3-2 - Fibre opt
26、ic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-2: Examinations and measurements - Polarization dependent loss in a single-mode fibre optic device EN 61300-3-2 - IEC 61300-3-6 - Fibre optic interconnecting devices and passive components - Basic test
27、 and measurement procedures - Part 3-6: Examinations and measurements - Return loss EN 61300-3-6 - IEC 61300-3-7 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7: Examinations and measurements - Wavelength dependence of attenuation and r
28、eturn loss of single mode components EN 61300-3-7 - IEC 61300-3-20 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-20: Examinations and measurements - Directivity of fibre optic branching devices EN 61300-3-20 - IEC 61753-1 2007 Fibre opt
29、ic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance standards EN 61753-1 2007 BS EN 61753-086-6:2011 2 61753-086-2 IEC:2009(E) CONTENTS 1 Scope.5 2 Normative references 5 3 Test6 4 Test report.6 5 Performance requirements . .7 5.1 Ref
30、erence components. 7 5.2 Dimensions . .7 5.3 Sample size . 7 5.4 Test details and requirements .7 Annex A (normative) Sample size .12 Annex B (informative) General information for 1490 / 1550 nm downstream and 1310 nm upstream PON WWDM devices . 13 Bibliography. 14 Figure B.1 Example of 1490 / 1550
31、nm downstream and 1310 nm upstream WWDM at central office and customer side Separate video detection inside the ONU 13 Figure B.2 Example of 1490 / 1550 nm downstream and 1310 nm upstream WWDM at central office side Integrated video detection inside the ONU. 13 Table 1 Test details and requirements
32、.7 Table A.1 Sample size 12 BS EN 61753-086-6:201161753-086-2 IEC:2009(E) 5 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD Part 086-2: Non-connectorized single-mode bidirectional 1 490 / 1 550 nm downstream and 1 310 nm upstream WWDM devices for category C Controlled
33、 environment 1 Scope This part of IEC 61753 contains the minimum initial performance, test and measurement requirements and severities which a fibre optic pigtailed 1 490 / 1 550 nm downstream and 1 310 nm upstream wide wavelength division multiplexing (WWDM) passive optical network (PON) device mus
34、t satisfy in order to be categorized as meeting the requirements of category C (controlled environments), as defined in Annex A of IEC 61753-1. Annex B of this standard provides information concerning the function of the 1 490 / 1 550 nm downstream and 1 310 nm upstream WWDM. 2 Normative references
35、The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60793-2-50, Optical fibres Part 2-50: Product
36、 specifications Sectional specification for class B single-mode fibres IEC 61300 (all parts), Fibre optic interconnecting devices and passive components Basic test and measurement procedures IEC 61300-2-1, Fibre optic interconnecting devices and passive components Basic test and measurement procedur
37、es Part 2-1: Tests Vibration (sinusoidal) IEC 61300-2-4, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-4: Tests Fibre/cable retention IEC 61300-2-9, Fibre optic interconnecting devices and passive components Basic test and measurement procedu
38、res Part 2-9: Tests Shock IEC 61300-2-14, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-14: Tests Optical power handling and damage threshold characterization IEC 61300-2-17, Fibre optic interconnecting devices and passive components Basic te
39、st and measurement procedures Part 2-17: Tests Cold IEC 61300-2-18, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-18: Tests Dry heat High temperature endurance IEC 61300-2-19, Fibre optic interconnecting devices and passive components Basic t
40、est and measurement procedures Part 2-19: Tests Damp heat (steady state) BS EN 61753-086-6:2011 6 61753-086-2 IEC:2009(E) IEC 61300-2-22, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-22: Tests Change of temperature IEC 61300-2-42, Fibre opti
41、c interconnecting devices and passive components Basic test and measurement procedures Part 2-42: Tests Static side load for connectors IEC 61300-2-44, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-44: Tests Flexing of the strain relief of fi
42、bre optic devices IEC 61300-3-2, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-2: Examinations and measurements Polarization dependence of attenuation in a single-mode fibre optic device IEC 61300-3-6, Fibre optic interconnecting devices and
43、passive components Basic test andmeasurement procedures Part 3-6: Examinations and measurements Return loss IEC 61300-3-7, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-7: Wavelength dependence of attenuation and return loss IEC 61300-3-20, F
44、ibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-20: Examinations and measurements Directivity of fibre optic branching devices IEC 61300-3-29, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part
45、3-29: Examinations and measurements Measurement techniques for characterizing the amplitude of the spectral transfer function of DWDM components IEC 61753-1, Fibre optic interconnecting devices and passive components performance standard Part 1: General and guidance for performance standard 3 Test U
46、nless otherwise specified, all test methods are in accordance with the relevant part of IEC 61300 series. Each test defines the number of samples to be evaluated. The samples used for each test are intended to be previously unstressed new samples but may also be selected from previously used samples
47、 if desired. The samples shall be terminated onto single-mode fibres as per IEC 60793-2-50, Type B 1.1, in either coated fibres (primary and secondary) or reinforced cable format. All measurements shall be carried out at normal room conditions, unless otherwise stated. All tests shall be carried out
48、 over the optical wavelength bands of 1 260 nm to 1 360 nm, 1 480 nm to 1 500 nm, and 1 550 nm to 1 560 nm, unless otherwise specified. NOTE 1 310 nm, 1 490 nm and 1 550 nm are the peak or centre wavelengths, stated for the bands 1 260 nm to 1 360 nm, 1 480 nm to 1 500 nm and 1 550 nm to 1 560 nm. 4
49、 Test report Fully documented test reports and supporting evidence shall be prepared and be available for inspection as evidence that the tests have been carried out and complied with. BS EN 61753-086-6:201161753-086-2 IEC:2009(E) 7 5 Performance requirements 5.1 Reference components The testing for these components does not require the use of reference components. 5.2 Dimensions Dimensions shall
