1、BSI Standards PublicationIndustrial communication networks ProfilesPart 5-17: Installation of fieldbuses Installation profiles for CPF 17BS EN 61784-5-17:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking
2、 permitted without license from IHS-,-,-National forewordThis British Standard is the UK implementation of EN 61784-5-17:2013. It isidentical to IEC 61784-5-17:2013.The UK participation in its preparation was entrusted to Technical Com-mittee AMT/7, Industrial communications: process measurement and
3、control, including fieldbus.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 20
4、14.Published by BSI Standards Limited 2014ISBN 978 0 580 84202 3ICS 25.040.40; 35.100.40Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 January 2014.Amendments/
5、corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 61784-5-17:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-EUROPEAN STANDARD EN 61784-5
6、-17 NORME EUROPENNE EUROPISCHE NORM December 2013 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels 2013 CENELEC - All rig
7、hts of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61784-5-17:2013 E ICS 25.040.40; 35.100.40 English version Industrial communication networks - Profiles - Part 5-17: Installation of fieldbuses - Installation profiles for CPF 17 (IEC 61784-5-17:2013
8、) Rseaux de communication industriels - Profils - Partie 5-17: Installation des bus de terrain - Profils dinstallation pour CPF 17 (CEI 61784-5-17:2013) Industrielle Kommunikationsnetze - Profile - Teil 5-17: Feldbusinstallation - Installationsprofile fr die Kommunikationsprofilfamilie 17 (IEC 61784
9、-5-17:2013) This European Standard was approved by CENELEC on 2013-10-22. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibl
10、iographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the re
11、sponsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Fi
12、nland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 61784-5-17:2013Copyr
13、ight British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 61784-5-17:2013 - 2 - Foreword The text of document 65C/738/FDIS, future edition 1 of IEC 61784-5-17, prepared by SC 65C
14、 “Industrial networks“ of IEC/TC 65 “Industrial-process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61784-5-17:2013. The following dates are fixed: latest date by which the document has to be implemented at national level by publi
15、cation of an identical national standard or by endorsement (dop) 2014-07-22 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2016-10-22 This standard is to be used in conjunction with EN 61918:2013. Attention is drawn to the possibility that some o
16、f the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61784-5-17:2013 was approved by CENELEC as a European Standard without an
17、y modification. BS EN 61784-5-17:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,- 3 - EN 61784-5-17:2013 Annex ZA (normative) Normative references to internationa
18、l publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the r
19、eferenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Annex ZA of EN 61918:2013 applies, except as follows: Publication Year Title EN/HD Year Addition to Annex ZA of EN
20、61918:2013: IEC 61918 2013 Industrial communication networks - Installation of communication networks in industrial premises EN 61918 2013 BS EN 61784-5-17:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networki
21、ng permitted without license from IHS-,-,- 2 61784-5-17 IEC:2013 CONTENTS INTRODUCTION . 7 1 Scope . 8 2 Normative references . 8 3 Terms, definitions and abbreviated terms . 8 4 CPF 17: Overview of installation profiles 8 5 Installation profile conventions . 8 6 Conformance to installation profiles
22、 9 Annex A (Normative) CP 17/1 (RAPIEnet) specific installation profile. 10 A.1 Installation profile scope . 10 A.2 Normative references . 10 A.3 Installation profile terms, definitions, and abbreviated terms . 10 A.3.1 Terms and definitions 10 A.3.2 Abbreviated terms . 10 A.3.3 Conventions for inst
23、allation profiles . 10 A.4 Installation planning . 10 A.4.1 General . 10 A.4.1.1 Objective 10 A.4.1.2 Cabling in industrial premises . 10 A.4.1.3 The planning process 10 A.4.1.4 Specific requirements for CPs . 10 A.4.1.5 Specific requirements for generic cabling in accordance with ISO/IEC 24702 10 A
24、.4.2 Planning requirements . 10 A.4.2.1 Safety . 10 A.4.2.2 Security 10 A.4.2.3 Environmental considerations and EMC 10 A.4.2.4 Specific requirements for generic cabling in accordance with ISO/IEC 24702 11 A.4.3 Network capabilities 11 A.4.3.1 Network topology 11 A.4.3.2 Network characteristics . 11
25、 A.4.4 Selection and use of cabling components 12 A.4.4.1 Cable selection . 12 A.4.4.2 Connecting hardware selection . 14 A.4.4.3 Connections within a channel/permanent link 15 A.4.4.4 Terminators 16 A.4.4.5 Device location and connection . 16 A.4.4.6 Coding and labelling . 16 A.4.4.7 Earthing and b
26、onding of equipment and devices and shielded cabling 16 A.4.4.8 Storage and transportation of cables . 17 A.4.4.9 Routing of cables 18 A.4.4.10 Separation of circuit 18 A.4.4.11 Mechanical protection of cabling components . 18 BS EN 61784-5-17:2013Copyright British Standards Institution Provided by
27、IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-61784-5-17 IEC:2013 3 A.4.4.12 Installation in special areas . 18 A.4.5 Cabling planning documentation 19 A.4.5.1 Common description . 19 A.4.5.2 Cabling planning documen
28、tation for CPs . 19 A.4.5.3 Network certification documentation 19 A.4.5.4 Cabling planning documentation for generic cabling in accordance with ISO/IEC 24702. 19 A.4.6 Verification of cabling planning specification . 19 A.5 Installation implementation . 19 A.5.1 General requirements 19 A.5.1.1 Comm
29、on description . 19 A.5.1.2 Installation of CPs . 19 A.5.1.3 Installation of generic cabling in industrial premises 19 A.5.2 Cable installation . 19 A.5.2.1 General requirements for all cabling types 19 A.5.2.2 Installation and routing 20 A.5.2.3 Specific requirements for CPs . 20 A.5.2.4 Specific r
30、equirements for wireless installation . 20 A.5.2.5 Specific requirements for generic cabling in accordance with ISO/IEC 24702 21 A.5.3 Connector installation 21 A.5.3.1 Common description . 21 A.5.3.2 Shielded connectors . 21 A.5.3.3 Unshielded connectors 21 A.5.3.4 Specific requirements for CPs . 2
31、1 A.5.3.5 Specific requirements for generic cabling in accordance with ISO/IEC 24702 21 A.5.4 Terminator installation . 21 A.5.5 Device installation . 21 A.5.5.1 Common description . 21 A.5.5.2 Specific requirements for CPs . 21 A.5.6 Coding and labelling 21 A.5.6.1 Common description . 21 A.5.6.2 S
32、pecific requirements for CPs . 21 A.5.7 Earthing and bonding of equipment and devices and shield cabling . 21 A.5.7.1 Common description . 21 A.5.7.2 Bonding and earthing of enclosures and pathways 21 A.5.7.3 Earthing methods 21 A.5.7.4 Shield termination methods . 22 A.5.7.5 Specific requirements f
33、or CPs . 22 A.5.7.6 Specific requirements for generic cabling in accordance with ISO/IEC 24702 22 A.5.8 As-implemented cabling documentation . 22 A.6 Installation verification and installation acceptance test 22 A.6.1 General . 22 A.6.2 Installation verification . 22 A.6.2.1 General . 22 A.6.2.2 Ver
34、ification according to cabling planning documentation 22 A.6.2.3 Verification of earthing and bonding 22 A.6.2.4 Verification of shield earthing 22 BS EN 61784-5-17:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or
35、 networking permitted without license from IHS-,-,- 4 61784-5-17 IEC:2013 A.6.2.5 Verification of cabling system 22 A.6.2.6 Cable selection verification . 23 A.6.2.7 Connector verification . 23 A.6.2.8 Connection verification 23 A.6.2.9 Terminators verification . 23 A.6.2.10 Coding and labelling ver
36、ification . 23 A.6.2.11 Verification report . 23 A.6.3 Installation acceptance test . 23 A.6.3.1 General . 23 A.6.3.2 Acceptance test of Ethernet based cabling 23 A.6.3.3 Acceptance test of non-Ethernet-based cabling . 24 A.6.3.4 Specific requirements for wireless installation . 24 A.6.3.5 Acceptanc
37、e test report 24 A.7 Installation administration . 24 A.8 Installation maintenance and installation troubleshooting . 24 Figure 1 Standards relationships 7 Table A.1 Network characteristics for balanced cabling based on Ethernet 11 Table A.2 Network characteristics for optical fibre cabling 12 Table
38、 A.3 Information relevant to copper cable: fixed cables 13 Table A.4 Information relevant to copper cable: cords 13 Table A.5 Information relevant to optical fibre cables . 14 Table A.6 Connectors for balanced cabling CPs based on Ethernet . 14 Table A.7 Optical fibre connecting hardware 15 Table A.
39、8 Relationship between FOC and fibre types (CP 17/1) . 15 Table A.9 Parameters for balanced cables . 19 Table A.10 Parameters for silica optical fibre cables 20 BS EN 61784-5-17:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo re
40、production or networking permitted without license from IHS-,-,-61784-5-17 IEC:2013 7 INTRODUCTION This International Standard is one of a series produced to facilitate the use of communication networks in industrial control systems. IEC 61918:2013 provides the common requirements for the installati
41、on of communication networks in industrial control systems. This installation profile standard provides the installation profiles of the communication profiles (CP) of a specific communication profile family (CPF) by stating which requirements of IEC 61918 fully apply and, where necessary, by supple
42、menting, modifying, or replacing the other requirements (see Figure 1). For general background on fieldbuses, their profiles, and relationship between the installation profiles specified in this standard, see IEC 61158-1. Each CP installation profile is specified in a separate annex of this standard
43、. Each annex is structured exactly as the reference standard IEC 61918 for the benefit of the persons representing the roles in the fieldbus installation process as defined in IEC 61918 (planner, installer, verification personnel, validation personnel, maintenance personnel, administration personnel
44、). By reading the installation profile in conjunction with IEC 61918, these persons immediately know which requirements are common for the installation of all CPs and which are modified or replaced. The conventions used to draft this standard are defined in Clause 5. The provision of the installatio
45、n profiles in one standard for each CPF (for example IEC 61784-5-17 for CPF 17), allows readers to work with standards of a convenient size. Figure 1 Standards relationships BS EN 61784-5-17:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not fo
46、r ResaleNo reproduction or networking permitted without license from IHS-,-,- 8 61784-5-17 IEC:2013 INDUSTRIAL COMMUNICATION NETWORKS PROFILES Part 5-17: Installation of fieldbuses Installation profiles for CPF 17 1 Scope This part of IEC 61784-5 specifies the installation profiles for CPF 17 (RAPIE
47、net1). The installation profiles are specified in the annex. This annex is read in conjunction with IEC 61918:2013. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only t
48、he edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61918:2013, Industrial communication networks Installation of communication networks in industrial premises The normative references of IEC 61918:2013, Clause 2, apply. 3 Terms, definitions and abbreviated terms For the purpose of this document, the terms, definitions and abbreviated terms of IEC 61918:2013, Clause 3, apply. 4 CPF 17: Overview of installation profiles CPF 17 consists of one communication pr
