1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationIndustrial communication networks ProfilesPart 5-4: Installation of fieldbuses Installation profiles for CPF 4BS EN 61784-5-4:2012Copyright European Committee for Electrotechnica
2、l Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-National forewordThis British Standard is the UK implementation of EN 61784-5-4:2012. It isidentical to IEC 61784-5-4:2010.The UK participation in its prepar
3、ation was entrusted to Technical CommitteeAMT/7, Industrial communications: process measurement and control, includ-ing fieldbus.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions
4、of acontract. Users are responsible for its correct application. The British Standards Institution 2012Published by BSI Standards Limited 2012ISBN 978 0 580 72457 2ICS 25.040.40; 35.100.40 Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was publi
5、shed under the authority of the StandardsPolicy and Strategy Committee on 31 May 2012.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 61784-5-4:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for
6、ResaleNo reproduction or networking permitted without license from IHS-,-,-EUROPEAN STANDARD EN 61784-5-4 NORME EUROPENNE EUROPISCHE NORM April 2012 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnisch
7、e Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61784-5-4:2012 E ICS 25.040.40; 35.100.40 English version Industrial communication networks - Profiles - Part 5-
8、4: Installation of fieldbuses - Installation profiles for CPF 4 (IEC 61784-5-4:2010) Rseaux de communication industriels - Profils - Partie 5-4: Installation des bus de terrain - Profils dinstallation pour CPF 4 (CEI 61784-5-4:2010) Industrielle Kommunikationsnetze - Profile - Teil 5-4: Feldbusinsta
9、llation - Installationsprofile fr die Kommunikationsprofilfamilie 4 (IEC 61784-5-4:2010) This European Standard was approved by CENELEC on 2011-10-19. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the st
10、atus of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, Fren
11、ch, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria,
12、 Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the Unit
13、ed Kingdom. BS EN 61784-5-4:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EN 61784-5-4:2012 - 2 - Foreword The text of document 65C/602/FDIS, future ed
14、ition 1 of IEC 61784-5-4, prepared by SC 65C, “Industrial networks“, of IEC/TC 65, “Industrial-process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61784-5-4:2012. The following dates are fixed: latest date by which the document ha
15、s to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2012-10-20 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2014-10-19 This standard is to be used in conjunction with IEC 61918, second
16、edition (2010-07), together with the European Common Modification published with EN 61918:2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such paten
17、t rights. Endorsement notice The text of the International Standard IEC 61784-5-4:2010 was approved by CENELEC as a European Standard without any modification. BS EN 61784-5-4:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for Resa
18、leNo reproduction or networking permitted without license from IHS-,-,- 3 - EN 61784-5-4:2012 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this docume
19、nt. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Public
20、ation Year Title EN/HD Year IEC 61918 2010 Industrial communication networks - Installation of communication networks in industrial premises - - BS EN 61784-5-4:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproducti
21、on or networking permitted without license from IHS-,-,- 2 61784-5-4 IEC:2010(E) CONTENTS INTRODUCTION.5 1 Scope.6 2 Normative references .6 3 Terms, definitions and abbreviated terms .6 4 CPF 4: Overview of installation profiles 6 5 Installation profile conventions .6 6 Conformance to installation
22、profiles7 Annex A (normative) CP 4/1 (P-NET, RS 485) specific installation profile 9 Annex B (normative) CP 4/3 (P-NET on IP) specific installation profile.21 Bibliography32 Figure 1 Standards relationships5 Figure A.1 Resistor termination circuit .14 Table A.1 Basic network characteristics for bala
23、nced cabling not based on Ethernet .11 Table A.2 Information relevant to copper cable: fixed cable .12 Table A.3 Connectors for copper cabling CPs not based on Ethernet.13 Table A.4 Parameters for balanced cables.16 Table B.1 Network characteristics for balanced cabling based on Ethernet 23 Table B.
24、2 Information relevant to copper cables: fixed cables 24 Table B.3 Connectors for balanced cabling CPs based on Ethernet .24 Table B.4 Parameters for balanced cables.27 BS EN 61784-5-4:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot
25、 for ResaleNo reproduction or networking permitted without license from IHS-,-,-61784-5-4 IEC:2010(E) 5 INTRODUCTION This International Standard is one of a series produced to facilitate the use of communication networks in industrial control systems. IEC 61918:2010 provides the common requirements
26、for the installation of communication networks in industrial control systems. This installation profile standard provides the installation profiles of the communication profiles (CP) of a specific communication profile family (CPF) by stating which requirements of IEC 61918 fully apply and, where ne
27、cessary, by supplementing, modifying, or replacing the other requirements (see Figure 1). For general background on fieldbuses, their profiles, and relationship between the installation profiles specified in this standard, see IEC/TR 61158-1. Each CP installation profile is specified in a separate a
28、nnex of this standard. Each annex is structured exactly as the reference standard IEC 61918 for the benefit of the persons representing the roles in the fieldbus installation process as defined in IEC 61918 (planner, installer, verification personnel, validation personnel, maintenance personnel, adm
29、inistration personnel). By reading the installation profile in conjunction with IEC 61918, these persons immediately know which requirements are common for the installation of all CPs and which are modified or replaced. The conventions used to draft this standard are defined in Clause 5. The provisi
30、on of the installation profiles in one standard for each CPF (for example IEC 61784-5-4 for CPF 4), allows readers to work with standards of a convenient size. INDUSTRIAL PREMISESISO/IEC 24702OFFICE PREMISES ISO/IEC 11801ISO/IEC14763-2IEC 61918(Common requirements)IEC 61158 seriesandIEC 61784-1, -2G
31、ENERIC CABLINGBETWEENAUTOMATIONISLANDSAPPLICATION-SPECIFICCABLINGWITHINAUTOMATIONISLANDSBETWEENAUTOMATIONISLANDSDESIGNPLANNING AND INSTALLATIONInstallation ProfilesIEC 61784-5 series(Selection +Add/Repl/Mod)Common structureData centre AnnexHomeAnnexOfficesAnnexIndustrialAnnexISO/IEC 15018ISO/IEC 247
32、64HOMES DATA CENTRESFigure 1 Standards relationships BS EN 61784-5-4:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- 6 61784-5-4 IEC:2010(E) INDUSTRIAL
33、COMMUNICATION NETWORKS PROFILES Part 5-4: Installation of fieldbuses Installation profiles for CPF 4 1 Scope This part of IEC 61784 specifies the installation profiles for CPF 4 (P-NET)1. The installation profiles are specified in the annexes. These annexes are read in conjunction with IEC 61918:201
34、0. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61918:2010, Industr
35、ial communication networks Installation of communication networks in industrial premises The normative references of IEC 61918:2010, Clause 2, apply. 3 Terms, definitions and abbreviated terms For the purposes of this document, the terms, definitions and abbreviated terms of IEC 61918:2010, Clause 3
36、, apply. 4 CPF 4: Overview of installation profiles CPF 4 consists of three communication profiles as specified in IEC 61784-1 and IEC 61784-2. The installation requirements for CP 4/1 (P-NET with physical layer according to RS 485) are specified in Annex A. The installation requirements for CP 4/3
37、(P-NET on IP) are specified in Annex B. NOTE There is no installation profile specified for CP 4/2 (P-NET with physical layer according to RS 232). 5 Installation profile conventions The numbering of the clauses and subclauses in the annexes of this standard corresponds to the numbering of IEC 61918
38、 main clauses and subclauses. _ 1P-NET is the trade name of International P-NET User Organisation ApS (IPUO). This information is given for the convenience of users of this International Standard and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance
39、 to this profile does not require use of the trade name P-NET. Use of the trade name P-NET requires permission of the trade name holder. BS EN 61784-5-4:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or ne
40、tworking permitted without license from IHS-,-,-61784-5-4 IEC:2010(E) 7 The annex clauses and subclauses of this standard supplement, modify, or replace the respective clauses and subclauses in IEC 61918. Where there is no corresponding subclause of IEC 61918 in the normative annexes in this standar
41、d, the subclause of IEC 61918 applies without modification. The annex heading letter represents the installation profile assigned in Clause 4. The annex (sub)clause numbering following the annex letter shall represent the corresponding (sub)clause numbering of IEC 61918. EXAMPLE “Annex B.4.4” in IEC
42、 61784-5-4 means that CP 4/3 specifies the Subclause 4.4 of IEC 61918. All main clauses of IEC 61918 are cited and apply in full unless otherwise stated in each normative installation profile annex. If all subclauses of a (sub)clause are omitted, then the corresponding IEC 61918 (sub)clause applies.
43、 If in a (sub)clause it is written “Not applicable”, then the corresponding IEC 61918 (sub)clause does not apply. If in a (sub)clause it is written “Addition”, then the corresponding IEC 61918 (sub)clause applies with the additions written in the profile. If in a (sub)clause it is written “Replaceme
44、nt”, then the text provided in the profile replaces the text of the corresponding IEC 61918 (sub)clause. NOTE A replacement can also comprise additions. If in a (sub)clause it is written “Modification”, then the corresponding IEC 61918 (sub)clause applies with the modifications written in the profil
45、e. If all (sub)clauses of a (sub)clause are omitted but in this (sub)clause it is written “(Sub)clause x has addition:” (or “replacement:”) or “(Sub)clause is not applicable.”, then (sub)clause x becomes valid as declared and all the other corresponding IEC 61918 (sub)clauses apply. 6 Conformance to
46、 installation profiles Each installation profile within this standard includes part of IEC 61918:2010. It may also include defined additional specifications. A statement of compliance to an installation profile of this standard shall be stated2as either Compliance to IEC 61784-5-4:20103for CP 4/m or
47、 Compliance to IEC 61784-5-4 (Ed.1.0) for CP 4/m where the name within the angle brackets is optional and the angle brackets are not to be included. The m within CP 4/m shall be replaced by the profile number 1 or 3. NOTE The name may be the name of the profile, for example P-NET with physical layer
48、 according to RS 485 or P-NET on IP. _ 2In accordance with ISO/IEC Directives 3The date should not be used when the edition number is used. BS EN 61784-5-4:2012Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- 8 61784-5-4 IEC:2010(E) If the name is a trade name then the permission of the trade name holder shall be required. Product standards shall not include any conform
