1、raising standards worldwide NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BSI Standards Publication Electric vehicle conductive charging system Part 1: General requirements BS EN 61851-1:2011National foreword This British Standard is the UK implementation of EN 61851-1:2011.
2、 It is identical to IEC 61851-1:2010. It supersedes BS EN 61851-1:2001 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee PEL/69, Electric vehicles. A list of organizations represented on this committee can be obtained on request to its secretary. This p
3、ublication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2011 ISBN 978 0 580 64015 5 ICS 43.120 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under
4、 the authority of the Standards Policy and Strategy Committee on 31 August 2011. Amendments issued since publication Amd. No. Date Text affected BRITISH STANDARD BS EN 61851-1:2011 EUROPEAN STANDARD EN 61851-1 NORME EUROPENNE EUROPISCHE NORM August 2011 CENELEC European Committee for Electrotechnica
5、l Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61851-1
6、:2011 E ICS 43.120 Supersedes EN 61851-1:2001English version Electric vehicle conductive charging system - Part 1: General requirements (IEC 61851-1:2010) Systme de charge conductive pour vhicules lectriques - Partie 1: Rgles gnrales (CEI 61851-1:2010) Elektrische Ausrstung von Elektro- Straenfahrze
7、ugen - Konduktive Ladesysteme fr Elektrofahrzeuge - Teil 1: Allgemeine Anforderungen (IEC 61851-1:2010) This European Standard was approved by CENELEC on 2011-04-12. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
8、Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English,
9、 French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belg
10、ium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. B
11、S EN 61851-1:2011EN 61851-1:2011 - 2 - Foreword The text of document 69/173/FDIS, future edition 2 of IEC 61851-1, prepared by IEC TC 69, Electric road vehicles and electric industrial trucks, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61851-1 on 2011-04-12. Thi
12、s European Standard supersedes EN 61851-1:2001. The main changes with respect to EN 61851-1:2001 are the following: revision of connector definitions and current levels (Clause 8); modification definition of pilot wire to pilot function; division of Clause 9 to create Clauses 9 and 11; Clause 9: spe
13、cific requirements for inlet, plug and socketoutlet; Clause 11: EVSE requirements: the basic generic requirements for charging stations; renumbering of annexes; deletion of previous Annex A and integration of charging cable requirements into new Clause 10; Annex B becomes Annex A and is normative fo
14、r all systems using a PWM pilot function with a pilot wire; Annex C becomes Annex B; replacement of previous Annex D (coding tables for power indicator) with B.4 in Annex B using new values; new informative Annex C describing an alternative pilot function system. Attention is drawn to the possibilit
15、y that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an iden
16、tical national standard or by endorsement (dop) 2012-01-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2014-04-01 Annexes ZA, ZB and ZC have been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 61851-1:2010 was appr
17、oved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60068-2-1:2007 NOTE Harmonized as EN 60068-2-1:2007 (not modified). IEC 60068-2-14:2009 NOTE Harmonized as EN 60068-2-14:2
18、009 (not modified). IEC 60364-6:2006 NOTE Harmonized as HD 60364-6:2007 (modified). BS EN 61851-1:2011 - 3 - EN 61851-1:2011 IEC 60947-1:2007 NOTE Harmonized as EN 60947-1:2007 (not modified). IEC 60947-6-1:2005 NOTE Harmonized as EN 60947-6-1:2005 (not modified). IEC 61140 NOTE Harmonized as EN 611
19、40. IEC 61851-21 NOTE Harmonized as EN 61851-21. IEC 61851-22 NOTE Harmonized as EN 61851-22. _ BS EN 61851-1:2011EN 61851-1:2011 - 4 - Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indisp
20、ensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by
21、 (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year - - Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 1: General requirements, frequency bands and electromagnetic disturbances EN 50065-1 2001 IEC 60038 (mod) 2009 IEC standard vo
22、ltages FprEN 60038 1)2011 IEC 60068-2-30 2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) EN 60068-2-30 2005 IEC 60068-2-75 1997 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests EN 60068-2-75 1997 IEC 60068-2-78 2001 Environmental testing
23、 - Part 2-78: Tests - Test Cab: Damp heat, steady state EN 60068-2-78 2001 IEC 60276 - Definitions and nomenclature for carbon brushes, brush-holders, commutators and slip-rings EN 60276 - IEC 60309-1 1999 Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements EN 6
24、0309-1 + A11 1999 2004 IEC 60309-2 1999 Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories EN 60309-2 + A11 1999 2004 IEC 60364-4-41 (mod) 2005 Low-voltage electrical installations - Part 4-41: Protect
25、ion for safety - Protection against electric shock HD 60364-4-41 + corr. July 2007 2007 IEC 60529 1989 Degrees of protection provided by enclosures (IP Code) EN 60529 + corr. May 1991 1993 IEC 60664-1 2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, require
26、ments and tests EN 60664-1 2007 IEC/TR 60755 2008 General requirements for residual current operated protective devices - - IEC 60884-1 2002 Plugs and socket-outlets for household and similar purposes - Part 1: General requirements - - 1)At draft stage. BS EN 61851-1:2011 - 5 - EN 61851-1:2011 Publi
27、cation Year Title EN/HD Year IEC 60884-2-5 1995 Plugs and socket-outlets for household and similar purposes - Part 2: Particular requirements for adaptors - - IEC 60947-3 2008 Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch- disconnectors and fuse-combination units E
28、N 60947-3 2009 IEC 60950-1 (mod) + corr. August 2005 2006 Information technology equipment - Safety - Part 1: General requirements EN 60950-1 + A11 + A12 2006 2009 2011 IEC 60990 1999 Methods of measurement of touch current and protective conductor current EN 60990 1999 IEC 61000-6-1 2005 Electromag
29、netic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments EN 61000-6-1 2007 IEC 61000-6-3 2006 Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light- industria
30、l environments EN 61000-6-3 2007 IEC 61008-1 (mod) 2010 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules FprEN 61008-1 200X 1)IEC 61009-1 (mod) 2010 Residual current operated circuit-breakers with integr
31、al overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules FprEN 61009-1 200X 1)IEC 61180-1 1992 High-voltage test techniques for low-voltage equipment - Part 1: Definitions, test and procedure requirements EN 61180-1 1994 IEC 62196-1 2003 Plugs, socket-outlets, vehicle
32、 couplers and vehicle inlets - Conductive charging of electric vehicles - Part 1: Charging of electric vehicles up to 250 A a.c. and 400 A d.c. EN 62196-1 2003 ISO 6469-2 2009 Electrically propelled road vehicles - Safety specifications - Part 2: Vehicle operational safety means and protection again
33、st failures - - ISO 6469-3 2001 Electric road vehicles - Safety specifications - Part 3: Protection of persons against electric hazards - - SAE J1772 2010 Recommended practices: SAE Electric Vehicle and Plug In Hybrid Electric Vehicle Conductive Charge Coupler - - BS EN 61851-1:2011EN 61851-1:2011 -
34、 6 - Annex ZB (normative) Special national conditions Special national condition: National characteristic or practice that cannot be changed even over a long period, e.g. climatic conditions, electrical earthing conditions. NOTE If it affects harmonization, it forms part of the European Standard or
35、Harmonization Document. For the countries in which the relevant special national conditions apply these provisions are normative, for other countries they are informative. Clause Special national condition 6.2 Germany In Germany the inline control box (EVSE) shall be in the plug or located within 2,
36、0 m of the plug. 6.3.3, Note 3 Finland The use of adaptors from mode 1 socket outlets to mode 3 vehicle cable assembly, that maintain the overall safety requirements of this standard is allowed in Finland. 11.3.2, Note 1 Finland In Finland IPXXD is not required for mode 1. 11.3.2, Note 1 The Netherl
37、ands In The Netherlands IPXXD is not required for mode 1. BS EN 61851-1:2011 - 7 - EN 61851-1:2011 Annex ZC (informative) A-deviations A-deviation: National deviation due to regulations, the alteration of which is for the time being outside the competence of the CENELEC national member. This Europea
38、n Standard does fall under LVD (2006/95/EC). In the relevant CENELEC countries these A-deviations are valid instead of the provisions of the European Standard until they have been removed. Clause Deviation 2 United Kingdom IEC 60884-1 is not indispensable for the application of this document. IEC 60
39、884-1 is not applicable in UK. The BS 1363 Series of standards applies to domestic socket-outlets, fused plugs, fused connection units, fused conversion plugs and to adaptors in the UK. 6.2 Germany Mode 1 cables without an in-cable RCD shall not be used but only Mode 1 cables with an in-cable RCD. A
40、ll Mode 1 cables without an in-cable RCD shall bear the following safety information: “Shall not be used in Germany“. Due to article 14 in the constitutional law of Germany which frames the preservation of status quo of existing electrical installations it cannot be ensured that fixed electrical ins
41、tallations at all times provide an RCD in Germany. 6.3.3 United Kingdom IEC 60884-2-5 is not applicable in UK. BS 1363-3 and BS 1363-5 apply to domestic adaptors and fused conversion plugs in the UK. 9.1 United Kingdom IEC 60884-1 is not applicable in UK. The BS 1363 Series of standards applies to d
42、omestic socket-outlets, fused plugs, fused connection units, fused conversion plugs and to adaptors in the UK. 9.2 United Kingdom IEC 60884-1 is not applicable in UK. The BS 1363 Series of standards applies to domestic socket-outlets, fused plugs, fused connection units, fused conversion plugs and t
43、o adaptors in the UK. 9.3 United Kingdom IEC 60884-1 is not applicable in UK. The BS 1363 Series of standards applies to domestic socket-outlets, fused plugs, fused BS EN 61851-1:2011EN 61851-1:2011 - 8 - connection units, fused conversion plugs and to adaptors in the UK. 11.6 United Kingdom IEC 608
44、84-1 is not applicable in UK. The BS 1363 Series of standards applies to domestic socket-outlets, fused plugs, fused connection units, fused conversion plugs and to adaptors in the UK. _ BS EN 61851-1:2011 2 61851-1 IEC:2010 CONTENTS 1 Scop e 7 2 Normative references 7 3 Terms and definitions 9 4 Ge
45、neral requirements . 13 5 Rating of the supply a.c. voltage 13 6 General system requirement and interface 14 6.1 General description 14 6.2 EV charging modes 14 6.3 Types of EV connection using cables and plugs (cases A, B, and C) . 14 6.3.1 General description . 14 6.3.2 Cord extension set 16 6.3.3
46、 Adaptors 17 6.4 Functions provided in each mode of charging for modes 2, 3, and 4 17 6.4.1 Modes 2, 3 and 4 functions 17 6.4.2 Optional functions for modes 2, 3 and 4 . 17 6.4.3 Details of functions for modes 2, 3 and 4 . 18 6.4.4 Details of optional functions . 18 6.4.5 Details of pilot function 1
47、8 6.5 Serial data communication 19 7 Protection against electric shock 19 7.1 General requirements . 19 7.2 Protection against direct contact 19 7.2.1 General 19 7.2.2 Accessibility of live parts 19 7.2.3 Stored energy discharge of capacitors 20 7.3 Protection against indirect contact . 20 7.4 Suppl
48、ementary measures 20 7.5 Provision for mode 4 EVSE . 20 7.6 Additional requirements 21 8 Connection between the power supply and the EV . 21 8.1 General . 21 8.2 Contact sequencing 23 8.3 Functional description of a standard interface . 23 8.4 Functional description of a basic interface 23 8.5 Funct
49、ional description of a universal interface . 23 9 Specific requirements for vehicle inlet, connector, plug and socket-outlet . 24 9.1 General requirements . 24 9.2 Operating temperature 24 9.3 Service life of inlet/connector and plug/socket-outlet 24 9.4 Breaking capacity . 24 9.5 IP degrees. 24 9.6 Insertion and extraction force 25 9.7 Latching of the retaining device . 25 10 Charging cable assembly requirements . 25 BS EN 61851-1:201161851-1 IEC:2010 3 10.1 Electrical rating 25 10.2 Electrical
