1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationFibre optic active components and devices Performance standardsPart 5: ATM-PON transceivers with LD driver and CDR ICsBS EN 62149-5:2011National forewordThis British Standard is
2、the UK implementation of EN 62149-5:2011. It isidentical to IEC 62149-5:2009. It supersedes BS EN 62149-5:2003, which iswithdrawn.The UK participation in its preparation was entrusted by Technical CommitteeGEL/86, Fibre optics, to Subcommittee GEL/86/3, Fibre optic systems andactive devices.A list o
3、f organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2011 ISBN 978 0 580 62225 0 ICS 33.180.20Compliance with a British S
4、tandard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2011.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 62149-5:2011EUROPEAN STANDARD EN 62149-
5、5 NORME EUROPENNE EUROPISCHE NORM January 2011 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2011 CENELEC - All rights of exploita
6、tion in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62149-5:2011 E ICS 33.180.20 Supersedes EN 62149-5:2003English version Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver and CDR ICs (IEC 62149-5:2009)
7、Composants et dispositifs actifs fibres optiques - Normes de fonctionnement - Partie 5: Emetteurs-rcepteurs ATM-PON avec programme de gestion LD et ICs CDR (CEI 62149-5:2009) Aktive Lichtwellenleiterbauelemente und -gerte - Betriebsverhalten - Teil 5: ATM-PON Sende- und Empfangsmodule mit Laserdiode
8、ntreiberschaltungen und Takt- und Datenrckgewinnungs-ICs (IEC 62149-5:2009) This European Standard was approved by CENELEC on 2011-01-02. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a nat
9、ional standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version
10、in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cypr
11、us, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 62149-5:2011EN 62149-5:
12、2011 Foreword The text of document 86C/891/FDIS, future edition 2 of IEC 62149-5, prepared by SC 86C, Fibre optic systems and active devices, of IEC TC 86, Fibre optics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62149-5 on 2011-01-02. This European Standard sup
13、ersedes EN 62149-5:2003. The main changes with respect to EN 62149-5:2003 are listed below: Normative references have been updated; Incorrect “Letter symbols” have been corrected; Some “Notes” in tables have been revised in order to harmonize with EN 62150-2:2004. Attention is drawn to the possibili
14、ty that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an ide
15、ntical national standard or by endorsement (dop) 2011-10-02 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2014-01-02 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 62149-5:2009 was approved by CENEL
16、EC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60617 series NOTE Harmonized in EN 60617 series (not modified). IEC 60793 series NOTE Harmonized in EN 60793 series (partially modified
17、). IEC 60794 series NOTE Harmonized in EN 60794 series (not modified). IEC 60825 series NOTE Harmonized in EN 60825 series (not modified). IEC 60874 series NOTE Harmonized in EN 60874 series (not modified). IEC 61076 series NOTE Harmonized in EN 61076 series (not modified). IEC 61280 series NOTE Har
18、monized in EN 61280 series (not modified). IEC 61281-1:1999 NOTE Harmonized as EN 61281-1:1999 (not modified). IEC 61754 series NOTE Harmonized in EN 61754 series (partially modified). IEC 62007-1:1999 NOTE Harmonized as EN 62007-1:2000 (not modified). IEC 62007-2:1999 NOTE Harmonized as EN 62007-2:
19、2000 (not modified). IEC 62148-1:2002 NOTE Harmonized as EN 62148-1:2002 (not modified). _ BS EN 62149-5:2011EN 62149-5:2011 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for
20、 the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the
21、 relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60068-2-6 2007 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) EN 60068-2-6 2008 IEC 60068-2-27 2008 Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock EN 60068-2-27 2009 IEC 60825-1 2007 Saf
22、ety of laser products - Part 1: Equipment classification and requirements EN 60825-1 2007 IEC 60950-1 (mod) 2005 Information technology equipment - Safety - Part 1: General requirements EN 60950-1 + A11 2006 2009 IEC 61000-6-3 - Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emi
23、ssion standard for residential, commercial and light-industrial environments EN 61000-6-3 - IEC 61280-1-1 1998 Fibre optic communication subsystem basic test procedures - Part 1-1: Test procedures for general communication subsystems - Transmitter output optical power measurement for single-mode opt
24、ical fibre cable EN 61280-1-1 1998 IEC 61280-1-3 1998 Fibre optic communication subsystem basic test procedures - Part 1-3: Test procedures for general communication subsystems - Central wavelength and spectral width measurement EN 61280-1-31)1999 IEC 61280-2-2 2008 Fibre optic communication subsyst
25、em test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement EN 61280-2-2 2008 IEC 61300-2-4 1995 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention EN 61300-2
26、-4 1997 1) EN 61280-1-3 is superseded by EN 61280-1-3:2010, which is based on IEC 61280-1-3:2010. BS EN 62149-5:2011EN 62149-5:2011 Publication Year Title EN/HD Year IEC 61300-2-17 2003 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-17: Te
27、sts - Cold EN 61300-2-17 2003 IEC 61300-2-18 2005 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat - High temperature endurance EN 61300-2-18 2005 IEC 61300-2-19 2005 Fibre optic interconnecting devices and passive compo
28、nents - Basic test and measurement procedures - Part 2-19: Tests - Damp heat (steady state) EN 61300-2-19 2005 IEC 61300-2-22 2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature EN 61300-2-22 2007 IEC 6130
29、0-3-6 2003 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6: Examinations and measurements - Return loss EN 61300-3-62)2003 IEC 61753-1 2007 Fibre optic interconnecting devices and passive components performance standard - Part 1: General
30、and guidance for performance standards EN 61753-1 2007 IEC/TR 61931 - Fibre optic - Terminology - - IEC 62150-2 2004 Fibre optic active components and devices - Test and measurement procedures - Part 2: ATM-PON transceivers EN 62150-23)2004 ITU-T Recommendation G.983.1 - Broadband optical access sys
31、tems based on Passive Optical Networks (PON) - - 2) EN 61300-3-6 is superseded by EN 61300-3-6:2009, which is based on IEC 61300-3-6:2008. 3) EN 62150-2 is superseded by EN 62150-2:2011, which is based on IEC 62150-2:2010. BS EN 62149-5:201162149-5 IEC:2009 CONTENTS INTRODUCTION.6 1 Scope.7 2 Normat
32、ive references .7 3 Term, definitions and abbreviations 8 3.1 Terms and definitions 8 3.2 Abbreviations 9 4 Classification9 5 Product definition .9 5.1 Description of transceiver module9 5.2 Description of applied form10 5.3 Block diagram .10 5.4 Absolute limiting rating 10 5.5 Functional specificat
33、ion .11 6 Testing .20 6.1 Characterization testing.20 6.1.1 Characterization: transmitter section .21 6.1.2 Characterization: receiver section 22 6.2 Performance testing 22 7 Environmental specifications 23 7.1 General safety.23 7.2 Laser safety 23 7.3 Electromagnetic emission23 Annex A (informative
34、) Measurement on tolerance to the reflected optical power (Table 3, Item 13) .24 Annex B (informative) Logic level of alarm and shutdown signal 26 Bibliography27 Figure 1 Functional block diagram (example) .10 Figure 2 Relationship of phase between clock and data signals .18 Figure 3 Recommended ele
35、ctrical circuit diagram for LVTTL-type interface (example) . 19 Figure 4 Schematic drawing for defining launched optical power without input to transmitter 19 Figure 5 Schematic drawing for defining launched optical power without input to transmitter 20 Figure A.1 Model for incidence into ONU receiv
36、er 24 Figure A.2 An example system to measure tolerance to the reflected optical power .24 Figure A.3 A recommended system to measure tolerance to the reflected optical power .25 Table 1 Absolute maximum ratings 11 Table 2 Operating environment 12 Table 3 Electrical and optical characteristics13 Tab
37、le 4 Electrical interface characteristics (PECL type) .16 BS EN 62149-5:201162149-5 IEC:2009 Table 5 Electrical interface characteristics (LVTTL type) 17 Table 6 Electrical interface characteristics of alarm output voltage (PECL type). 17 Table 7 Electrical interface characteristics of alarm output
38、voltage (LVTTL type) . 17 Table 8 Electrical interface characteristics of shutdown input voltage (both PECL and LVTTL types) .18 Table 9 Transmitter section characterization tests .21 Table 10 Receiver section characterization tests .22 Table 11 Performance testing plan.23 BS EN 62149-5:2011 6 62149
39、-5 IEC:2009 INTRODUCTION Fibre optic transceivers are used to convert electrical signals into optical signals and vice versa. The optical performance criteria are generally well specified for a number of internationally agreed applications areas such as ITU-T Recommendation G.983.1 and IEEE 802.3. T
40、his standard aims to assure inter-changeability in performance between fibre optic transceivers for ATM-PON systems supplied by different manufacturers, but does not guarantee operation between fibre optic transceivers. Manufacturers using the standards are responsible for meeting the required perfo
41、rmance and/or reliability and quality assurance under a recognized scheme. BS EN 62149-5:201162149-5 IEC:2009 7 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES PERFORMANCE STANDARDS Part 5: ATM-PON transceivers with LD driver and CDR ICs 1 Scope This part of IEC 62149 specifies performance on the transcei
42、ver modules for asynchronous-transfer-mode passive optical network (ATM-PON) systems recommended by the International Telecommunication Union (ITU) in ITU-T Recommendation G.983.1. 2 Normative references The following referenced documents are indispensable for the application of this document. For d
43、ated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60068-2-6:2007, Environmental testing Part 2-6: Tests Test Fc: Vibration (sinusoidal) IEC 60068-2-27:2008, Environmental testing Part 2-27: T
44、ests Test Ea and guidance: Shock IEC 60825-1:2007, Safety of laser products Part 1: Equipment classification and requirements IEC 60950-1:2005, Information technology equipment Safety Part 1: General requirements IEC 61000-6-3, Electromagnetic compatibility (EMC) Part 6-3: Generic standards Emission
45、 standard for residential, commercial and light-industrial environments IEC 61280-1-1:1998, Fibre optic communication subsystem basic test procedures Part 1-1: Test procedures for general communication subsystems Transmitter output optical power measurement for single-mode optical fibre cable IEC 61
46、280-1-3:1998, Fibre optic communication subsystem basic test procedures Part 1-3: Test procedures for general communication subsystems Central wavelength and spectral width measurement IEC 61280-2-2:2008, Fibre optic communication subsystem test procedures Part 2-2: Digital systems Optical eye patte
47、rn, waveform and extinction ratio measurement IEC 61300-2-4:1995, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-4: Tests Fibre/cable retention IEC 61300-2-17:2003, Fibre optic interconnecting devices and passive components Basic test and meas
48、urement procedures Part 2-17: Tests Cold IEC 61300-2-18:2005, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-18: Tests Dry heat High temperature endurance BS EN 62149-5:2011 8 62149-5 IEC:2009 IEC 61300-2-19:2005, Fibre optic interconnecting d
49、evices and passive components Basic test and measurement procedures Part 2-19: Tests Damp heat (steady state) IEC 61300-2-22:2007, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-22: Tests Change of temperature IEC 61300-3-6:2003, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-6: E
