1、BSI Standards PublicationDetermination of certain substances in electrotechnicalproductsPart 5: Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MSBS EN 62321-5:2014National foreworded by BSI Standards Limited 2014 ISBN 978 0 580 7185
2、0 2 ICS 13.020; 43.040.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 May 2014.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARD
3、BS EN 62321-5:2014The UK participation in its preparation was entrusted to TechnicalCommittee GEL/111, Electrotechnical environment committee.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessar
4、y provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2014Published by BSI Standards Limited 2014ISBN 978 0 580 71850 2ICS 13.020; 43.040.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard
5、was published under the authority of theStandards Policy and Strategy Committee on 31 May 2014.Amendments/corrigenda issued since publicationDate Text affectedThis British Standard is the UK implementation of EN 62321-5:2014. It is identical to IEC 62321-5:2013. Together with BS EN 62321-1:2013, BS
6、EN 62321-2:2014, BS EN 62321-3-1:2014, BS EN 62321-3-2:2014, BS EN 62321-4:2014, BS EN 62321-6, BS EN 62321-7-1, BS EN 62321-7-2 andBS EN 62321-8 it supersedes BS EN 62321:2009, which will be withdrawnupon publication of all parts of the BS EN 62321 series.EUROPEAN STANDARD EN 62321-5 NORME EUROPENN
7、E EUROPISCHE NORM April 2014 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels 2014 CENELEC - All rights of exploitation i
8、n any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62321-5:2014 E ICS 13.020; 43.040.10 Supersedes EN 62321:2009 (partially) English version Determination of certain substances in electrotechnical products - Part 5: Cadmium, lead and chromium in polymers and electronics
9、and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS (IEC 62321-5:2013) Dtermination de certaines substances dans les produits lectrotechniques - Partie 5: Du cadmium, du plomb et du chrome dans les polymres et les produits lectroniques, du cadmium et du plomb dans les mtaux par AAS, AFS,
10、ICP-OES et ICP-MS (CEI 62321-5:2013) Verfahren zur Bestimmung von bestimmten Substanzen in Produkten der Elektrotechnik - Teil 5: Cadmium, Blei und Chrom in Polymeren und Elektronik und Cadmium und Blei in Metallen mit AAS, AFS, ICP-OES und ICP-MS (IEC 62321-5:2013) This European Standard was approv
11、ed by CENELEC on 2013-11-15. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nation
12、al standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own
13、 language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
14、 France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 62321-5:2014EN 62321-5:2014 - 2 - Foreword The text of document 1
15、11/297/FDIS, future edition 1 of IEC 62321-5, prepared by IEC/TC 111 “Environmental standardization for electrical and electronic products and systems“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62321-5:2014. The following dates are fixed: latest date by which the d
16、ocument has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2014-10-25 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2016-11-15 EN 62321-5:2014 is a partial replacement of EN 62321:200
17、9, forming a structural revision and generally replacing Clauses 8 to 10, as well as Annexes F, G and H. Future parts in the EN 62321 series will gradually replace the corresponding clauses from EN 62321:2009. Until such time as all parts are published, however, EN 62321:2009 remains valid for those
18、 clauses not yet re-published as a separate part. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the I
19、nternational Standard IEC 62321-5:2013 was approved by CENELEC as a European Standard without any modification. BS EN 62321-5:2014EN 62321-5:2014 - 2 - Foreword The text of document 111/297/FDIS, future edition 1 of IEC 62321-5, prepared by IEC/TC 111 “Environmental standardization for electrical an
20、d electronic products and systems“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62321-5:2014. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (d
21、op) 2014-10-25 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2016-11-15 EN 62321-5:2014 is a partial replacement of EN 62321:2009, forming a structural revision and generally replacing Clauses 8 to 10, as well as Annexes F, G and H. Future parts
22、 in the EN 62321 series will gradually replace the corresponding clauses from EN 62321:2009. Until such time as all parts are published, however, EN 62321:2009 remains valid for those clauses not yet re-published as a separate part. Attention is drawn to the possibility that some of the elements of
23、this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62321-5:2013 was approved by CENELEC as a European Standard without any modification. BS EN
24、 62321-5:2014- 3 - EN 62321-5:2014 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated ref
25、erences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title
26、EN/HD Year IEC 62321-1 - Determination of certain substances in electrotechnical products - Part 1: Introduction and overview EN 62321-1 - IEC 62321-2 - Determination of certain substances in electrotechnical products - Part 2: Disassembly, disjunction and mechanical sample preparation EN 62321-2 -
27、IEC 62321-3-1 - Determination of certain substances in electrotechnical products - Part 3-1: Screening electrotechnical products for lead, mercury, cadmium, total chromium and total bromine using X-ray Fluorescence Spectrometry EN 62321-3-1 - ISO 3696 - Water for analytical laboratory use - Specific
28、ation and test methods EN ISO 3696 - ISO 5961 - Water quality - Determination of cadmium by atomic absorption spectrometry EN ISO 5961 - BS EN 62321-5:2014 2 62321-5 IEC:2013 CONTENTS INTRODUCTION . 6 1 Scope . 7 2 Normative references . 8 3 Terms, definitions and abbreviations 8 Terms and definitio
29、ns 8 3.1Abbreviations 9 3.24 Reagents 9 General . 9 4.1Reagents . 9 4.25 Apparatus . 11 General . 11 5.1Apparatus 12 5.26 Sampling 13 General . 13 6.1Test portion . 13 6.2Polymers . 13 6.2.1Metals . 13 6.2.2Electronics 13 6.2.37 Procedure. 13 Polymers . 13 7.1General . 13 7.1.1Dry ashing method 14 7
30、.1.2Acid digestion method . 15 7.1.3Microwave digestion 15 7.1.4Metals . 16 7.2General . 16 7.2.1Common methods of sample digestion. 17 7.2.2Samples containing Zr, Hf, Ti, Ta, Nb or W 17 7.2.3Samples containing Sn 17 7.2.4Electronics 18 7.3General . 18 7.3.1Digestion with aqua regia 18 7.3.2Microwav
31、e digestion 19 7.3.3Preparation of reagent blank solution 20 7.48 Calibration 20 General . 20 8.1Preparation of the calibration solution . 20 8.2Development of the calibration curve . 20 8.3Measurement of the sample 21 8.49 Calculation . 22 10 Precision 22 11 Quality control 24 General . 24 11.1Limi
32、ts of detection (LOD) and limits of quantification (LOQ) . 25 11.2BS EN 62321-5:2014 2 62321-5 IEC:2013 CONTENTS INTRODUCTION . 6 1 Scope . 7 2 Normative references . 8 3 Terms, definitions and abbreviations 8 Terms and definitions 8 3.1Abbreviations 9 3.24 Reagents 9 General . 9 4.1Reagents . 9 4.2
33、5 Apparatus . 11 General . 11 5.1Apparatus 12 5.26 Sampling 13 General . 13 6.1Test portion . 13 6.2Polymers . 13 6.2.1Metals . 13 6.2.2Electronics 13 6.2.37 Procedure. 13 Polymers . 13 7.1General . 13 7.1.1Dry ashing method 14 7.1.2Acid digestion method . 15 7.1.3Microwave digestion 15 7.1.4Metals
34、. 16 7.2General . 16 7.2.1Common methods of sample digestion. 17 7.2.2Samples containing Zr, Hf, Ti, Ta, Nb or W 17 7.2.3Samples containing Sn 17 7.2.4Electronics 18 7.3General . 18 7.3.1Digestion with aqua regia 18 7.3.2Microwave digestion 19 7.3.3Preparation of reagent blank solution 20 7.48 Calib
35、ration 20 General . 20 8.1Preparation of the calibration solution . 20 8.2Development of the calibration curve . 20 8.3Measurement of the sample 21 8.49 Calculation . 22 10 Precision 22 11 Quality control 24 General . 24 11.1Limits of detection (LOD) and limits of quantification (LOQ) . 25 11.2BS EN
36、 62321-5:201462321-5 IEC:2013 3 Annex A (informative) Practical application of determination of Cd , Pb and Cr in polymers and electronics and Cd and Pb in metals by AAS, AFS, ICP-OES and ICP-MS . 27 Annex B (informative) Results of international interlaboratory study nos. 2 (IIS2) and 4A (IIS 4A) 3
37、3 Bibliography 36 Figure A.1 Background correction 31 Table 1 Repeatability and reproducibility 22 Table 2 Acceptance criteria of items for the quality control . 24 Table 3 Method detection limit = t sn1. 26 Table A.1 Spectral interferences for the wavelengths of Cd and Pb . 28 Table A.2 Spectral in
38、terferences for the wavelengths of Cr 29 Table A.3 Examples of mass/charge (m/z) ratios 30 Table A.4 Examples of wavelengths for AAS 30 Table A.5 Examples of wavelengths for AFS 31 Table A.6 Program for microwave digestion of samples . 32 Table B.1 Statistical data for AAS 33 Table B.2 Statistical d
39、ata for AFS 33 Table B.3 Statistical data for ICP-OES . 34 Table B.4 Statistical data for ICP-MS . 35 BS EN 62321-5:2014 6 62321-5 IEC:2013 INTRODUCTION The widespread use of electrotechnical products has drawn increased attention to their impact on the environment. In many countries this has result
40、ed in the adaptation of regulations affecting wastes, substances and energy use of electrotechnical products. The use of certain substances (e.g. lead (Pb), cadmium (Cd) and polybrominated diphenyl ethers (PBDEs) in electrotechnical products, is a source of concern in current and proposed regional l
41、egislation. The purpose of the IEC 62321 series is therefore to provide test methods that will allow the electrotechnical industry to determine the levels of certain substances of concern in electrotechnical products on a consistent global basis. WARNING Persons using this International Standard sho
42、uld be familiar with normal laboratory practice. This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any national regulatory cond
43、itions. BS EN 62321-5:2014 6 62321-5 IEC:2013 INTRODUCTION The widespread use of electrotechnical products has drawn increased attention to their impact on the environment. In many countries this has resulted in the adaptation of regulations affecting wastes, substances and energy use of electrotech
44、nical products. The use of certain substances (e.g. lead (Pb), cadmium (Cd) and polybrominated diphenyl ethers (PBDEs) in electrotechnical products, is a source of concern in current and proposed regional legislation. The purpose of the IEC 62321 series is therefore to provide test methods that will
45、 allow the electrotechnical industry to determine the levels of certain substances of concern in electrotechnical products on a consistent global basis. WARNING Persons using this International Standard should be familiar with normal laboratory practice. This standard does not purport to address all
46、 of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any national regulatory conditions. BS EN 62321-5:201462321-5 IEC:2013 7 DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTEC
47、HNICAL PRODUCTS Part 5: Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS 1 Scope This Part of IEC 62321 describes the test methods for lead, cadmium and chromium in polymers, metals and electronics by AAS, AFS, ICP-OES and ICP-MS.
48、This standard specifies the determination of the levels of cadmium (Cd), lead (Pb) and chromium (Cr) in electrotechnical products. It covers three types of matrices: polymers/polymeric workpieces, metals and alloys and electronics. This standard refers to the sample as the object to be processed and
49、 measured. What the sample is or how to get to the sample is defined by the entity carrying out the tests. Further guidance on obtaining representative samples from finished electronic products to be tested for levels of regulated substances may be found in IEC 62321-2. It is noted that the selection and/or determination of the sample may affect the interpretation of the test results. This standard describes the use of four methods, namely AAS (atomic absorption spectrometry), AFS (atomi
