1、BRITISH STANDARD BS EN 62330-1:2004 Helical-scan digital video cassette recording system using 12,65 mm (0,5 in) magnetic tape Format HD-D5 Part 1: VTR specifications The European Standard EN 62330-1:2004 has the status of a British Standard ICS 33.160.40; 35.240.99 BS EN 62330-1:2004 This British S
2、tandard was published under the authority of the Standards Policy and Strategy Committee on 11 May 2004 BSI 11 May 2004 ISBN 0 580 43759 0 National foreword This British Standard is the official English language version of EN 62330-1:2004. It is identical with IEC 62330-1:2003. The UK participation
3、in its preparation was entrusted to Technical Committee EPL/100, Audio, video and multimedia systems, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement internation
4、al or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to
5、 include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any
6、enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 66, an ins
7、ide back cover and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEAN STANDARD EN 62330-1 NORME EUROPENNE EUROPISCHE NORM March 2004 CENELEC European Committee for Electrote
8、chnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No.
9、EN 62330-1:2004 E ICS 33.160.40; 35.240.99 English version Helical-scan digital video cassette recording system using 12,65 mm (0,5 in) magnetic tape - Format HD-D5 Part 1: VTR specifications (IEC 62330-1:2003) Systme de magntoscope numrique cassette balayage hlicodal sur bande magntique de 12,65 mm
10、 (0,5 in) - Format HD-D5 Partie 1: Spcifications du magntoscope (CEI 62330-1:2003) Videokassettensystem mit Schrgspuraufzeichnung auf Magnetband 12,65 mm (0,5 in) - HD-D5-Format Teil 1: VTR-Festlegungen (IEC 62330-1:2003) This European Standard was approved by CENELEC on 2004-03-01. CENELEC members
11、are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application t
12、o the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has t
13、he same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
14、Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Foreword The text of the International Standard IEC 62330-1:2003, prepared by Technical Area 6: Higher data rate storage media and equipment, of IEC TC 100, Audio, video and multimedia systems and equipment, was submitted t
15、o the formal vote and was approved by CENELEC as EN 62330-1 on 2004-03-01 without any modification. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2005-03-01 latest date by w
16、hich the national standards conflicting with the EN have to be withdrawn (dow) 2007-03-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 62330-1:2003 was approved by CENELEC as a European Standard without any modification. In the official version,
17、 for Bibliography, the following note has to be added for the standard indicated: IEC 60735 NOTE Harmonized as EN 60735:1991 (not modified). _ Page2 EN623301:2004 CONTENTS 1 Scope.6 2 Normative references.8 3 Environment and test conditions.8 3.1 Environment8 3.2 Reference tape8 3.3 Calibration tape
18、.8 4 Video tape9 4.1 Base9 4.2 Width9 4.3 Width fluctuation.9 4.4 Tape thickness 9 4.5 Transmissivity.9 4.6 Offset yield strength9 4.7 Magnetic coating .9 4.8 Coating coercivity9 4.9 Particle orientation 9 5 Helical recordings.10 5.1 Tape speed .10 5.2 Record location and dimensions10 5.3 Helical tr
19、ack record tolerance zones13 5.4 Relative positions of recorded information.14 5.5 Gap azimuth14 5.6 Transport and scanner15 6 Programme track data 18 6.1 Introduction.18 6.2 Labelling convention18 6.3 Sector details18 6.4 Edit gaps.26 6.5 Channel code26 6.6 Magnetization38 7 Video interface.39 8 Au
20、dio interface.39 8.1 Encoding parameters39 8.2 Digital signal interface.39 9 Video processing39 9.1 Introduction.39 9.2 Recorded data.39 9.3 Channel and video block distribution .41 9.4 Word data arrangement.41 9.5 Video randomize.42 9.6 Outer error protection42 9.7 Field data array.42 9.8 Order of
21、transmission to inner coding 44 Page3 EN623301:2004 10 Audio processing44 10.1 Introduction.44 10.2 Source coding.44 10.3 Source processing.47 10.4 Auxiliary words51 10.5 Outer error protection55 10.6 Inner protection.56 10.7 Order of transmission to inner coding 56 10.8 Channel code56 10.9 Allocati
22、on of audio sectors 56 11 Longitudinal tracks .57 11.1 Relative timing57 11.2 Control track.57 11.3 Cue record58 11.4 Time and control code record 58 Annex A (normative) Tape tension .59 Annex B (normative) Cross-tape track measurement technique .60 Annex C (normative) Track pattern during insert ed
23、iting.64 Annex ZA (Normative) Normative references to international publications with their corresponding European publications .65 Bibliography66 Figure 1 Record block diagram 7 Figure 2 Playback block diagram .7 Figure 3 Location and dimensions of recorded tracks.11 Figure 4 Location of cue and ti
24、me and control code track record12 Figure 5 Location and dimensions of tolerance zones of helical track record14 Figure 6 A possible scanner configuration16 Figure 7 A possible longitudinal head location and tape wrap 17 Figure 8 Sector arrangement on helical track .18 Figure 9 Sync block format 19
25、Figure 10 Sync block identification format20 Figure 11 Track, segment and field numbers21 Figure 12 Sync block number.22 Figure 13 Sector preamble and postamble .25 Figure 14 Reconfigured data40 Figure 15 Channel and video block distribution 41 Figure 16 Field data array43 Figure 17 Audio data block
26、 field array46 Figure 18 Audio data block layout 49 Figure 19 Audio data block arrangement50 Figure 20 Digital audio word to byte conversion .51 Figure 21 Audio data block auxiliary data.52 Page4 EN623301:2004 Figure 22 Audio channel arrangement56 Figure 23 Recorded control record waveform timing.57
27、 Figure B.1 Correction factors (actual tape speed and tension) .62 Figure B.2 Cross-tape measurement technique62 Figure B.3 Track location error plot (example) .63 Figure C.1 A typical pattern during insert editing64 Table 1 Record location and dimensions13 Table 2 Parameters for a possible scanner
28、design.15 Table 3 8-14 modulation (CDS 0) 28 Table 4 8-14 modulation (CDS 0) 33 Table 5 Priority of modulation code selection (end DSV = 2) 38 Table 6 Priority of modulation code selection (end DSV = +2)38 Table 7 Data rate and wavelength38 Table 8 Signal format information 40 Table 9 AES status dat
29、a (Byte 0) .47 Table 10 AES status data (Byte 1) .47 Table 11 Audio data word mode.50 Table 12 Channel use control word53 Table 13 Pre-emphasis control word 53 Table 14 Word mode control word54 Table 15 FNCT mode.54 Table B.1 Nomenclature and calculation of track location error 61 Page5 EN623301:200
30、4 HELICAL-SCAN DIGITAL VIDEO CASSETTE RECORDING SYSTEM USING 12,65 mm (0,5 in) MAGNETIC TAPE FORMAT HD-D5 Part 1: VTR specifications 1 Scope This part of IEC 62330 specifies the content, format, and recording method of the data blocks containing HD compressed video data defined in part 2, audio, and
31、 associated data which form the helical records on 12,65 mm (0,5 in) tape in cassettes as specified in IEC 61835. In addition, this standard specifies the content, format, and recording method of the longitudinal record containing tracking information for the scanning head associated with the helica
32、l records, and also the longitudinal cue audio, and time and control code. One video channel of HD compressed video data and four independent audio channels are recorded in the digital format. Each of these channels is designed to be capable of independent editing. The HD compressed video data are d
33、erived from the following HD video signal: 1080 line / 59,94 Hz field frequency interlace system 720 line / 59,94 Hz frame frequency progressive system Figure 1 and Figure 2 show block diagrams of the processes involved in the recorder. Page6 EN623301:2004 ANALOG/ DIGITAL INTERFACE INTRA- FIELD SHUF
34、FLE BLOCK SHUFFLE AUDIO(ANALOG) (DIGITAL AES/EBU) VIDEO OUTER ECC ENCODER COMPRESSED HD DIGITAL DATA HELICAL TRACK RECORD DRIVER AND HEAD CHANNEL CODER INNER ECC ENCODER DATA MUX SYNC/ ID GEN. CONTROL TRACK INFORMATION CONTROL TRACK GEN. TIME AND CONTROL CODE EXT T.C. TIME CODE GEN. CUE (ANALOG) REC
35、. AMP RECORD DRIVERS AND HEADS CHANNEL DEMUX SWITCH OUTER ECC ENCODER INTRA- FIELD SHUFFLEFigure 1 Record block diagram AUDIO(ANALOG) DIGITAL/ ANALOG INTERFACE INTRA- FIELD DESHUFFLE (DIGITAL AES/EBU) AUDIO ERROR CONCEAL OUTER ECC DECODER BLOCK DESHUFFLE VIDEO VIDEO ERROR CONCEAL HELICAL TRACK PLAYB
36、ACK HEAD PRE AMP AND EQ. CONTROL TRACK INFORMATION CONTROL TRACKP.B. TIME AND CONTROL CODE T.C. TIME CODEREADER CUE (ANALOG) P.B. AMP HEADS AND PLAYBACK INTERFACE SYNC DETEC CHANNEL DECODER INNER ECC DECODER DATA DEMUX INTRA- FIELD DESHUFFLE CHANNEL MUX SWITCH OUTER ECC DECODER COMPRESSED HD DIGITAL
37、 DATAFigure 2 Playback block diagram Page7 EN623301:2004 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (incl
38、uding any amendments) applies. IEC 60461:2001, Time and control code for video tape recorders IEC 60958, Digital audio interface IEC 61835, Helical-scan digital component video cassette recording system using 12,65 mm (0,5 in) magnet tape Format D-5 ITU-R BS. 647 A digital audio interface for broadc
39、asting studios SMPTE RP 155:1995, Audio levels and Indicators for Digital Audio Records on Digital Television Tape Recorders 3 Environment and test conditions 3.1 Environment Tests and measurements made on the system to check the requirements of this standard shall be carried out under the following
40、 conditions: Temperature 20 C 1 C Relative humidity (50 2) % Barometric pressure from 86 kPa to 106 kPa Tape conditioning not less than 24 h Centre tape tension 0,31 N 0,05 N (see Annex A) 3.2 Reference tape Blank tape for reference recordings should be available from any source meeting the tape cha
41、racteristics as portrayed by this standard. 3.3 Calibration tape The calibration tapes meeting the requirements of 3.3.1 and Clause 4 should be available from manufacturers who produce DTTRs and players in accordance with this standard. 3.3.1 Record locations and dimensions Tolerances shown in Table
42、 1 will be reduced by 50 %. 3.3.2 Calibration signals Two sets of signals should be recorded on the calibration tape: a) Video: 100 % colour bars Audio: 1 kHz tone at 20 dB below full scale on each of audio channels Cue: 1 kHz tone at reference level; 10 kHz tone at reference level Page8 EN623301:20
43、04 b) A signal of constant recorded frequency (i.e. one-half the Nyquist frequency) shall be recorded only on tracks of field 0, segment 0 for the purpose of mechanical alignment. Recording level should conform to 6.6.3. 4 Video tape 4.1 Base The base material shall be polyester or equivalent. 4.2 W
44、idth The tape width shall be 12,650 mm 0,008 mm. The tape, covered with glass, is measured without tension at a minimum of five different positions along the tape using a calibrated comparator having an accuracy of 0,001 mm (1 m). The tape width is defined as the average of the five readings. 4.3 Wi
45、dth fluctuation Tape width fluctuation shall not exceed 5 m peak to peak. Measurement of tape width fluctuation shall be taken over a tape length of 900 mm. The value of tape width fluctuation shall be evaluated by measuring the tape width at 10 points, each separated by a distance of 100 mm. 4.4 Ta
46、pe thickness Two types of tape thickness shall be permitted by this standard. The first tape thickness shall be 10,2 m to 11,0 m (referred to as 11 m); the second tape thickness shall be 13,0 m to 14,0 m (referred to as 14 m). 4.5 Transmissivity Transmissivity shall be less than 5 %, measured over t
47、he range of wavelengths 800 nm to 900 nm. 4.6 Offset yield strength The offset yield strength shall be greater than 9 N for 11 m tape and 10 N for 14 m tape. The force required to produce 0,2 % elongation of a 1 000 mm test sample with a pull rate of a 10 mm per minute shall be used to confirm the o
48、ffset yield strength. The line beginning at 0,2 % elongation parallel to the initial tangential slope is drawn and then read at the point of intersection of the line and the stress-strain curve. 4.7 Magnetic coating The magnetic layer of the tape shall consist of a coating of metal particles or equi
49、valent. 4.8 Coating coercivity The coating coercivity shall be a class 1 800 (144 000 A/m) with an applied field of 400 000 A/m (5 000 Oe) as measured by a 50 Hz or 60 Hz B-H meter or vibrating sample magnetometer (VSM). 4.9 Particle orientation The metal particles shall be longitudinally oriented. Page9 EN623301:2004
