1、BRITISH STANDARD BS EN 62356-3:2004 Video recording 12,65 mm type D-11 format Part 3: Data mapping over SDTI The European Standard EN 62356-3:2004 has the status of a British Standard ICS 33.160.40 BS EN 62356-3:2004 This British Standard was published under the authority of the Standards Policy and
2、 Strategy Committee on 28 January 2005 BSI 28 January 2005 ISBN 0 580 45336 7 National foreword This British Standard is the official English language version of EN 62356-3:2004. It is identical with IEC 62356-3:2003. The UK participation in its preparation was entrusted to Technical Committee EPL/1
3、00, Audio, video and multi-media systems, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may
4、 be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users a
5、re responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, an
6、d keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 15 and a back cover. The BSI copyright notice displayed in this docume
7、nt indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEAN STANDARD EN 62356-3 NORME EUROPENNE EUROPISCHE NORM October 2004 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisc
8、hes Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62356-3:2004 E ICS 33.160.40 English version Video recording 12,65 mm type D-
9、11 format Part 3: Data mapping over SDTI (IEC 62356-3:2003) Enregistrement Vido Format 12,65 mm de type D11 Partie 3: Mappage de donnes travers linterface de transport de donnes srie (SDTI) (CEI 62356-3:2003) Videoaufzeichnung D-11-Format mit 12,65 mm Teil 3: Datenabbildung ber SDTI (IEC 62356-3:200
10、3) This European Standard was approved by CENELEC on 2004-09-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographic
11、al references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a C
12、ENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ir
13、eland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Foreword The text of the International Standard IEC 62356-3:2003, prepared by IEC TC 100, Audio, video and multimedia systems and equipment, w
14、as submitted to the formal vote and was approved by CENELEC as EN 62356-3 on 2004-09-01 without any modification. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2005-09-01 la
15、test date by which the national standards conflicting with the EN have to be withdrawn (dow) 2007-09-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 62356-3:2003 was approved by CENELEC as a European Standard without any modification. _ Page2 EN
16、623563:2004CONTENTS 1 Scope.4 2 Normative references4 3 General specifications.5 4 Header data6 4.1 Location of the header data.6 4.2 Structure of the header data6 5 Payload data.7 5.1 Location of type D-11 stream data7 5.2 Structure and contents of the SDTI payload lines 7 6 AES3 data.10 6.1 Genera
17、l.10 6.2 Location of AES3 data.10 7 Auxiliary data11 7.1 General.11 7.2 Location of auxiliary data.11 7.3 VITC11 8 EDH11 Annex A (normative) SDI and SDTI Operation at 24/1,001Hz.12 Annex B (informative) SDI and SDTI Operation at 24Hz.13 Annex ZA (normative) Normative references to international publ
18、ications with their corresponding European publications14 Bibliography15 Figure 1 SDTI mapping 5 Figure 2 Payload data stream structure8 Figure 3 Addition of reserved word and ECC to a compressed picture basic block .9 Figure 4 Addition of reserved word and ECC to an auxiliary basic block.9 Table 1
19、Total number of lines and total number of samples per line for each frame rate of the interface 6 Table 2 Contents of header data (total words: 53)6 Table 3 Location of compressed picture data .7 Table 4 Contents of compressed picture data 7 Table 5 Location of AES3 data.10 Table 6 Location of auxil
20、iary data (vertical position).11 Table 7 VITC H-ANC packet 11 Table A.1 Interface sampling structure/formatting 12 Table B.1 Interface sampling structure/formatting 13 Page3 EN623563:2004 VIDEO RECORDING 12,65 mm TYPE D-11 FORMAT Part 3: Data mapping over SDTI 1 Scope This International Standard spe
21、cifies the mapping of type D-11 compressed picture data stream into the SDTI payload area (SMPTE 305.2M) together with the mapping of four channels of AES3 data and time-code data into H-ANC packets. Type D-11 compressed picture data-stream mapping is defined for source-coded picture rates of 24/1,0
22、01/P,24/P, 25/P, 50-I, 30/1,001/P and 60/1,001. For the transmission of compressed picture data coded at source picture rates of 25/P and 50/I, the SDTI interface operates at a frame rate of 25 Hz. For the transmission of compressed picture data coded at source picture rates of 30/1,001P and 60/1,00
23、1I, the SDTI interface operates at a frame rate of 30/1,001 Hz. The transmission of compressed picture data coded at the source picture rates of 24/1, 001/P and 24/P require the SDTI interface to operate at frame rates of 24/1, 001Hz and 24 Hz with the parameters defined in Annexes A and B of this s
24、tandard. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 62356-2: Vide
25、o recording 12,65 mm type D-11 format Part 2: Picture compression and data stream 1SMPTE 259M:1997, Television 10-Bit 4:2:2 Component and 4fsc Composite Digital signals Serial Digital Interface SMPTE 272M:1994, Television Formatting AES/EBU Audio and Auxiliary Data into Digital Video Ancillary Data
26、Space SMPTE 291M:1998, Television Ancillary Data Packet and Space Formatting SMPTE 305.2M:2000, Television Serial Data Transport Interface (SDTI) SMPTE RP165:1994, Error Detection Check words and Status Flags for Use in Bit-Serial Digital Interfaces for Television SMPTE RP188:1999, Transmission of T
27、ime Code and Control Code in the Ancillary Data Space of a Digital Television Data Stream AES3:1992, Serial transmission format for two-channel linearly represented digital audio data _ 1To be published. Page4 EN623563:20043 General specifications This standard specifies the mapping of type D-11 dat
28、a stream packets over SMPTE 305.2M (SDTI). Type D-11 data stream comprises packets of basic blocks containing compressed picture data and auxiliary picture data as specified in IEC 62356-2. Four channels of 24-bit AES3 data are optionally mapped into the H-ANC space of the interface according to SMP
29、TE 272M. In addition, VITC may also be mapped into the H-ANC space. Type D-11 data-stream packets are grouped into six equal data segments of which the first three data segments are mapped onto the first field of the SDTI and the last three data segments are mapped onto the second field of the SDTI,
30、 as shown in Figure 1 and Table 1. Figure 1 also includes the optional four channels of 24-bit AES3 data mapped into the H-ANC space. VITC data may also be mapped into the H-ANC space. Switchingpoint area Switchingpoint area Compressed picture data Compressed picture data 0 1439 E A V 1444 -1496 Aux
31、iliary data Auxiliary data 1440 -1443 1497-1609 (625) 1497-1637 (525) First field Second field SAV EAV Audio data Header data E A V S A V S A VFigure 1 SDTI mapping Page5 EN623563:2004Table 1 Total number of lines and total number of samples per line for each frame rate of the interface Frame rate o
32、f the interface 24/1,001Hz 24Hz 25Hz 30/1,001Hz Total number of lines 525 625 625 525 Total number of samples per line 2 145 1 800 1 728 1 716 NOTE The 24/1,001 Hz and 24 Hz interface details are contained in Annexes A and B. 4 Header data 4.1 Location of the header data Header data shall be placed
33、in H-ANC space and shall be located immediately following the EAV as shown in Figure 1 and as defined by SMPTE 305.2M. 4.2 Structure of the header data The structure of the header data shall conform to SMPTE 305.2M and the contents shall be as shown in Table 2. Table 2 Contents of header data (total
34、 words: 53) Word No. Data name Value Comment 0 ADF 000h 1 ADF 3FFh 2 ADF 3FFh 3 DID 140h 4 SDID 101h 5 Data count 22Eh Data: 46 words 6 Line No.0 XXX 7 Line No.1 XXX 8 Line No. CRC 0 XXX 9 Line No. CRC 1 XXX 10 CODE & AAI 101h Payload: 1440 words, AAI: Unspecified 11 26 Destination address 200h 27 4
35、2 Source address 200h 43 Block type 241h Fixed block size with ECC: 1438 words 44 CRC flag 101h Payload CRC 45 Reserved 0 XXX 46 Reserved 1 XXX 47 Reserved 2 XXX 48 Reserved 3 XXX 49 Reserved 4 XXX 50 Header CRC 0 XXX 51 Header CRC 1 XXX 52 Check sum XXX Page6 EN623563:20045 Payload data 5.1 Locatio
36、n of type D-11 stream data Type D-11 data-stream packets (comprising compressed picture and auxiliary data) shall be mapped into the payload space of the SDTI and shall be located as defined in Table 3 and shown in Figure 1. Table 3 Location of compressed picture data SDTI frame rate 24/1,001 Hz and
37、 30/1,001 Hz 24 Hz and 25 Hz Total number of interface lines 525 625 Horizontal mapping location Samples 0 to 1 439 Vertical mapping location First field Second field Lines 50 to 261 Lines 313 to 524 Lines 59 to 270 Lines 372 to 583 NOTE The line numbering of the vertical mapping location is the sam
38、e as that defined in SMPTE 259M. Each compressed picture data stream is divided into six equal segments, numbered 0 to 5, as defined in IEC 62356-2. All the packets from segments 0 to 2 shall be mapped into the first field of the SDTI. All the packets from segments 3 to 5 shall be mapped into the se
39、cond field of the SDTI. Figure 2 defines how the data packets are mapped into each field of the SDTI. 5.2 Structure and contents of the SDTI payload lines 5.2.1 Payload line formatting The SDTI payload lines shall contain the information defined in Table 4 and Figure 2. Table 4 Contents of compresse
40、d picture data Word No. Data name Value Comment 0 Data type 248h Data type of type D-11 1 User data 200h or 1FEh or 1FDh Valid data not exist Valid data start line Valid data line 2 to 1 437 User data XXX Type D-11 compressed picture data 1 438 Payload CRC 0 XXX 1 439 Payload CRC 1 XXX Page7 EN62356
41、3:2004 Basic block Compressed picture data = 224 W x 678 x 2/Field BID Even data RVD ECC 2 W 217 W 1 W 4 W Even data 678 Even data/field 1 sync = 224 W 8 bit E BID 0E BID 1E D0 E D1 E D2 E D216 RVD E ECC E ECC E ECC E ECC Basic block BID Odd data RVD ECC 2 W 217 W 1 W 4 W Odd data 678 Odd data/field
42、 1 sync = 224 W 8 bit O BID 0O BID 0O D0 O D1 O D2 O D216 RVD O ECC O ECC O ECC O ECC Multiplexed odd and even b9: Compliment of b8 1 packet (= 2 sync) 2 bit b8: Parity for b0b7 = 448 W 8 bit E BID 0O BID 0E BID 1O BID 1E D0 O D0 E D1 O D1 E D2 O D2 E D216 O D216 RVD RVD E ECC O ECC E ECC O ECC E EC
43、C O ECC E ECC O ECC Payload data 1436 W x 212 lines 1st line SAV 3FF SAV 000 SAV 000 SAV XYZ Type 248 FLAG1FE E BID 0O BID 0E BID 1O BID 1E D0 O D0 E ECC O ECC E BID 0O BID 0E BID 1O BID 1E D0 O D0 E D42 OD42 E D43 OD43 CRC0 CRC1 EAV 3FF EAV 000 EAV 000 EAV XYZ 2 W 1 packet = 448 W 2 W Payload = 144
44、0 W 2nd line SAV 3FF SAV 000 SAV 000 SAV XYZ Type 248 FLAG1FD E D44 O D44 E D45 O D45 E ECC O ECC E BID 0O BID 0E BID 1O BID 1E D0 O D0 E D87 O D87 E D88 O D88 E D89 O D89 CRC0 CRC1 EAV 3FF EAV 000 EAV 000 EAV XYZ 212th line SAV 3FF SAV 000 SAV 000 SAV XYZ Type 248 FLAG1FD E ECC O ECC E ECC O ECC 00
45、h 00h 00h 00h 00h 00h 00h CRC0 CRC1 EAV 3FF EAV 000 EAV 000 EAV XYZ Figure 2 Payload data-stream structure For each field of the SDTI, 1 356 basic blocks of type D-11 compressed picture data shall be mapped into the SDTI payload area on contiguous lines. In each SDTI field, 678 odd and 678 even data
46、 blocks are respectively selected from channel 0 and channel 1 as specified in IEC 62356-2. 5.2.2 Basic block formatting The compressed picture and auxiliary basic block format of type D-11 compressed data shall conform to IEC 62356-2. For the purpose of transporting the basic blocks over SDTI, four
47、 bytes of Reed-Solomon ECC shall be added to each basic block. Between the end of each basic block and the start of the ECC a 1-byte reserved word shall be added. The default value of the reserved word is zero. Page8 EN623563:2004 Figure 3 illustrates the addition of the reserved word and the 4-byte
48、 RS ECC to a compressed picture basic block. 224 W 219 W 1 1 1 162 54 1 4 8 bit BID 0BID 1HD B 215B 214B 54B 53 B 1B 0RVD K 3 K 0Luminance Chrominance ECC ECC calculation range Figure 3 Addition of reserved word and ECC to a compressed picture basic block Figure 4 illustrates the addition of the res
49、erved word and the 4-byte RS ECC to an auxiliary basic block 224 W 219 W 1 1 63 154 1 4 8 bit BID 0BID 1Auxiliary Data Reserved RVD K 3 K 0ECC ECC calculation range Figure 4 Addition of reserved word and ECC to an auxiliary basic block 5.2.3 Error correction code (Reed-Solomon ECC) Four words of Reed-Solomon EC
