1、 g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58equipment Part 2: Sectional specification Electric double-layer capacitors for power applicationThe
2、 European Standard EN 62391-2:2006 has the status of a British StandardICS 31.060.10Fixed electric double-layer capacitors for use in electronic BRITISH STANDARDBS EN 62391-2:2006BS EN 62391-2:2006This British Standard was published under the authority of the Standards Policy and Strategy Committee
3、on 30 June 2006 BSI 2006request to its secretary.Cross-referencesISBN 0 580 48894 2The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or
4、 by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immu
5、nity from legal obligations.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 23 and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date
6、 CommentsA list of organizations represented on this committee can be obtained on present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and prom
7、ulgate them in the UK.National forewordThis British Standard is the official English language version of EN 62391-2:2006. It is identical with IEC 62391-2:2006.The UK participation in its preparation was entrusted to Technical Committee EPL/40X, Capacitors and resistors for electronic equipment, whi
8、ch has the responsibility to: aid enquirers to understand the text;EUROPEAN STANDARD EN 62391-2 NORME EUROPENNE EUROPISCHE NORM June 2006 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung C
9、entral Secretariat: rue de Stassart 35, B - 1050 Brussels 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62391-2:2006 E ICS 31.060.10 English version Fixed electric double-layer capacitors for use in electronic equipment Par
10、t 2: Sectional specification - Electric double-layer capacitors for power application (IEC 62391-2:2006) Condensateurs lectriques fixes double couche utiliss dans les quipements lectroniques Partie 2: Spcification intermdiaire -Condensateurs lectriques fixes double couche pour application de puissan
11、ce (CEI 62391-2:2006) Elektrische Doppelschichtfestkondensatoren zur Verwendung in Gerten der Elektronik Teil 2: Rahmenspezifikation: Elektrische Doppelschichtfestkondensatoren fr Leistungsanwendungen (IEC 62391-2:2006) This European Standard was approved by CENELEC on 2006-05-01. CENELEC members ar
12、e bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to
13、the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the
14、 same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Po
15、land, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Foreword The text of document 40/1641/FDIS, future edition 1 of IEC 62391-2, prepared by IEC TC 40, Capacitors and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel vote and wa
16、s approved by CENELEC as EN 62391-2 on 2006-05-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2007-02-01 latest date by which the national standards conflicting with the
17、EN have to be withdrawn (dow) 2009-05-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 62391-2:2006 was approved by CENELEC as a European Standard without any modification. _ EN 62391-2:2006 2 CONTENTS 1 General4 1.1 Scope4 1.2 Object .4 1.3 Norm
18、ative references 4 1.4 Information to be given in a detail specification 5 1.5 Terminology 6 1.6 Marking .6 2 Preferred rating and characteristics.7 2.1 Preferred characteristics7 2.2 Preferred values of ratings.7 3 Quality assessment procedures 8 3.1 Primary stage of manufacture 8 3.2 Structurally
19、similar components .8 3.3 Declaration of conformity (basic requirements) .8 3.4 Test schedule and requirement for initial assessment (mandatory and optional tests)8 3.5 Quality conformance inspection .13 4 Test and measurement procedures .15 4.1 Preliminary drying15 4.2 Measuring conditions.15 4.3 V
20、isual examination and check of dimensions15 4.4 Electrical tests.15 4.5 Robustness of terminations16 4.6 Resistance to soldering heat16 4.7 Solderability 17 4.8 Rapid change of temperature.17 4.9 Vibration17 4.10 Endurance.18 4.11 Self-discharge .18 4.12 Storage at high temperature.19 4.13 Character
21、istics at high and low temperature .19 4.14 Damp heat, steady state 19 4.15 Passive flammability (if applicable) 19 4.16 Pressure relief (if applicable) .20 Annex A (informative) Calculation procedure for power density .21 Annex ZA (normative) Normative references to international publications with
22、their corresponding European publications23 Figure A.1 Voltage characteristics between capacitor terminals 22 Table 1 Fixed sample size test plan for qualification approval .10 Table 2 Tests schedule for qualification approval11 Table 3a Lot-by-lot inspection 14 Table 3b Periodic test 14 EN 62391-2:
23、2006 3 FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT Part 2: Sectional specification Electric double-layer capacitors for power application 1 General 1.1 Scope This part of IEC 62391 applies to electric double-layer capacitors for power application. Electric double-layer cap
24、acitors for power are intended for applications that require discharge currents in the range from mA to A. The characteristics of the capacitors include such performance as relatively high capacitance and low internal resistance, which is applicable to Class 3 of the measurement classification speci
25、fied in IEC 62391-1. The definition of power density and its calculating procedure should be in accordance with Annex A. 1.2 Object The object of this standard is to prescribe preferred ratings and characteristics and to select from IEC 62391-1 the appropriate quality assessment procedures, tests an
26、d measuring methods and to give general performance requirements for this type of capacitor. Test severities and requirements prescribed in detail specifications referring to this sectional specification shall be of equal or higher performance level; lower performance levels are not permitted. 1.3 N
27、ormative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60063, Preferred number s
28、eries for resistors and capacitors IEC 60068-1, Environmental testing Part 1: General and guidance IEC 60384-1, Fixed capacitors for use in electronic equipment Part 1: Generic specification IEC 60410, Sampling plans and procedures for inspection by attributes IEC 62391-1, Fixed electric double-laye
29、r capacitors for use in electronic equipment Part 1: Generic specification IEC 62391-2-1, Fixed electric double-layer capacitors for use in electronic equipment Part 2-1: Electric double-layer capacitors for power application Assessment level EZ ISO 3, Preferred numbers Series of preferred numbers E
30、N 62391-2:2006 4 1.4 Information to be given in a detail specification Detail specifications shall be derived from the relevant blank detail specification. Detail specifications shall not specify requirements inferior to those of the generic, sectional or blank detail specification. When more severe
31、 requirements are included, they shall be listed in 1.9 of the detail specification and indicated in the test schedules, for example by an asterisk. NOTE The information given in 1.4.1 may, for convenience, be presented in tabular form. The following information shall be given in each detail specifi
32、cation and the values quoted shall preferably be selected from those given in the appropriate clause of this sectional specification. 1.4.1 Outline drawing and dimensions There shall be an illustration of the surface mount capacitors as an aid to easy recognition and for comparison of the surface mo
33、unt capacitors with others. Dimensions and their associated tolerances, which affect interchangeability and mounting, shall be given in the detail specification. All dimensions shall preferably be stated in millimetres; however, when the original dimensions are given in inches, the converted metric
34、dimensions in millimetres shall be added. Normally, numerical values shall be given for the length of the body, the width and height of the body and wire spacing, or, for cylindrical types, the body diameter and length, and the length and diameter of the terminations. When necessary, for example, wh
35、en a number of case sizes are covered by a detail specification, the dimensions and their associated tolerances shall be placed in a table below the drawing. When the configuration is other than described above, the detail specification shall state such dimensional information as will adequately des
36、cribe the capacitor. When the capacitor is not designed for use on printed boards, this shall be clearly stated in the detail specification. 1.4.2 Mounting The detail specification shall specify the method of mounting to be applied for normal use and for the application of the vibration and the bump
37、 or shock test. The capacitors shall be mounted by their normal means. The design of the capacitor may be such that special mounting fixtures are required for its use. In this case, the detail specification shall describe the mounting fixtures and they shall be used in the application of the vibrati
38、on and bump or shock tests. 1.4.3 Rating and characteristics The ratings and characteristics shall be in accordance with the relevant clauses of this specification, together with the following. 1.4.3.1 Rated capacitance range See 2.2.1. NOTE When products approved to the detail specification have di
39、fferent ranges, the following statement should be added: “The range of capacitance values available in each voltage range is given in IEC QC 001005.” EN 62391-2:2006 5 1.4.3.2 Particular characteristics Additional characteristics may be listed, when they are considered necessary to specify adequatel
40、y the component for design and application purposes. 1.4.3.3 Soldering The detail specification shall prescribe the test methods, severities and requirements applicable to the solderability and the resistance to soldering heat tests. 1.4.4 Marking The detail specification shall specify the content o
41、f the marking on the capacitor and on the package. Deviations from 1.6 of this sectional specification shall be specifically stated. 1.5 Terminology For the purposes of this document, the terms and definitions of IEC 62391-1, together with the following, apply. 1.5.1 surface mount capacitor capacito
42、r whose small dimensions and nature or shape of terminations make it suitable for surface mounting 1.5.2 electric double layer capacitors for power application capacitors intended for the applications that require discharge currents in the range from mA to A NOTE The characteristics of the capacitor
43、s include such performance as relatively high capacitance and low internal resistance, which is applicable to Class 3 of the measurement classification specified in IEC 62391-1. 1.6 Marking IEC 62391-1, 2.4, applies with the following details. 1.6.1 The information given in the marking is normally s
44、elected from the following list; the relative importance of each item is indicated by its position in the list: a) polarity of the terminations (unless identified by the construction); b) rated capacitance; c) rated voltage (d.c. voltage may be indicated by the symbol or ); d) style (in accordance w
45、ith 1.1); e) year and month (or week) of manufacture; f) manufacturers name or trade mark; g) manufacturers type designation; h) classification of processing lead terminals (if applicable). 1.6.2 Capacitors shall bear a), b) and c) in 1.6.1, and as many of the rest of the items as possible which sho
46、uld be as legible as possible. Indication of marked items on a capacitor shall not overlap. 1.6.3 Any marking shall be legible and not easily smeared or removed by rubbing with the finger. EN 62391-2:2006 6 1.6.4 The package containing the capacitor(s) shall be clearly marked with all the informatio
47、n listed in 1.6.1, except polarity, unless this is applicable to the method of packaging. 1.6.5 Any additional marking shall be so applied that no confusion can arise. 2 Preferred rating and characteristics 2.1 Preferred characteristics The values given in the detail specification shall preferably b
48、e selected from the following: 2.1.1 Preferred climatic categories The surface mount capacitors covered by this specification are classified into climatic categories according to the general rules given in IEC 60068-1. The lower and upper category temperatures and the duration of the damp-heat, stea
49、dy-state test shall be chosen from the following. Lower category temperature: 25 C (40 C) Upper category temperature: +60 C and +70 C Duration of the damp-heat, steady-state test: 10 days The severities for the cold and dry heat tests are the lower and upper category temperatures respectively. NOTE The damp-heat steady-state test conditions here should be at a temperature of 40 C, and the relative humidity should be between 90 % and 95 %. 2.2 Prefe
