1、Lightning protection system components (LPSC)Part 1: Requirements for connection componentsBS EN 62561-1:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62561-1 June 2017 ICS 29.020; 91.120.40 Supersedes EN 625
2、61-1:2012 English Version Lightning Protection System Components (LPSC) - Part 1: Requirements for connection components (IEC 62561-1:2017) Composants des systmes de protection contre la foudre (CSPF) - Partie 1: Exigences pour les composants de connexion (IEC 62561-1:2017) Blitzschutzsystembauteile
3、 (LPSC) - Teil 1: Anforderungen an Verbindungsbauteile (IEC 62561-1:2017) This European Standard was approved by CENELEC on 2017-04-13. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a natio
4、nal standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A
5、version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulga
6、ria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
7、Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitatio
8、n in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62561-1:2017 E National forewordThis British Standard is the UK implementation of EN 62561-1:2017. It supersedes BS EN 62561-1:2012, which is withdrawn.The UK participation in its preparation was entrusted to Technica
9、l Committee GEL/81, Protection against lightning.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British S
10、tandards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 90949 8ICS 29.020; 91.120.40Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 J
11、uly 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62561-1:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62561-1 June 2017 ICS 29.020; 91.120.40 Supersedes EN 62561-1:2012 English Version Lightning Protection System Components (LPSC) - Part 1: R
12、equirements for connection components (IEC 62561-1:2017) Composants des systmes de protection contre la foudre (CSPF) - Partie 1: Exigences pour les composants de connexion (IEC 62561-1:2017) Blitzschutzsystembauteile (LPSC) - Teil 1: Anforderungen an Verbindungsbauteile (IEC 62561-1:2017) This Euro
13、pean Standard was approved by CENELEC on 2017-04-13. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical reference
14、s concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN
15、ELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugosla
16、v Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical
17、 Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN
18、62561-1:2017 E BS EN 62561-1:2017EN 62561-1:2017 2 European foreword The text of document 81/551/FDIS, future edition 2 of IEC 62561-1, prepared by IEC/TC 81, “Lightning protection“, was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62561-1:2017. The following dates are fi
19、xed: latest date by which this document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-01-13 latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2020-04-13 This document supersede
20、s EN 62561-1:2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62561-1:2017 was
21、 approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 62305 (series) NOTE Harmonized as EN 62305 (series). IEC 62305-1 NOTE Harmonized as EN 62305-1. BS EN 62561-1:2017EN
22、62561-1:2017 2 European foreword The text of document 81/551/FDIS, future edition 2 of IEC 62561-1, prepared by IEC/TC 81, “Lightning protection“, was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62561-1:2017. The following dates are fixed: latest date by which this docum
23、ent has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-01-13 latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2020-04-13 This document supersedes EN 62561-1:2012. Attention is draw
24、n to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62561-1:2017 was approved by CENELEC as a European S
25、tandard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 62305 (series) NOTE Harmonized as EN 62305 (series). IEC 62305-1 NOTE Harmonized as EN 62305-1. EN 62561-1:2017 3 Annex ZA (normative) Normative referenc
26、es to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the lates
27、t edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this a
28、nnex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60068-2-52 1996 Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution) EN 60068-2-52 1996 IEC 62561-2 - Lightning Protection System Components (LPSC) - Part 2: Requirements for con
29、ductors and earth electrodes EN 62561-2 - ISO 6957 1988 Copper alloys; ammonia test for stress corrosion resistance - - ISO 6988 1985 Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture EN ISO 6988 1994 BS EN 62561-1:2017This page deliberately left bla
30、nk 2 IEC 62561-1:2017 IEC 2017 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references 7 3 Terms and definitions 7 4 Classification . 9 4.1 According to the ability to withstand lightning current 9 4.2 According to the installation location . 9 4.3 According to the mechanical behavio
31、ur of connection components . 9 4.4 According to whether or not a connection is permanent 9 5 Requirements 9 5.1 General . 9 5.2 Installation instructions . 9 5.3 Lightning current carrying capability 9 5.4 Static mechanical stress . 10 5.5 Permanent connection 10 5.6 Non-permanent connection . 10 5
32、.7 Dismantling of test joints . 10 5.8 Damage to conductors and metal installations 10 5.9 Reliable connection 10 5.10 Terminals of bonding bars . 10 5.11 Marking . 10 6 Tests . 11 6.1 General condition on tests 11 6.2 Preparation of the specimen . 11 6.3 Conditioning/ageing 15 6.3.1 Connection comp
33、onents not embedded in concrete . 15 6.3.2 Connection components embedded in concrete . 15 6.4 Electrical test 16 6.5 Static mechanical test . 17 6.5.1 General . 17 6.5.2 Test procedure 17 6.6 Marking test 17 7 Electromagnetic compatibility (EMC) . 17 8 Structure and content of the test report 18 8.
34、1 General . 18 8.2 Report identification 18 8.3 Specimen description 18 8.4 Conductor . 18 8.5 Standards and references . 18 8.6 Test procedure 19 8.7 Testing equipment description 19 8.8 Measuring instruments description 19 8.9 Results and parameters recorded . 19 8.10 Statement of pass/fail . 19 2
35、 IEC 62561-1:2017 IEC 2017 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references 7 3 Terms and definitions 7 4 Classification . 9 4.1 According to the ability to withstand lightning current 9 4.2 According to the installation location . 9 4.3 According to the mechanical behaviour o
36、f connection components . 9 4.4 According to whether or not a connection is permanent 9 5 Requirements 9 5.1 General . 9 5.2 Installation instructions . 9 5.3 Lightning current carrying capability 9 5.4 Static mechanical stress . 10 5.5 Permanent connection 10 5.6 Non-permanent connection . 10 5.7 D
37、ismantling of test joints . 10 5.8 Damage to conductors and metal installations 10 5.9 Reliable connection 10 5.10 Terminals of bonding bars . 10 5.11 Marking . 10 6 Tests . 11 6.1 General condition on tests 11 6.2 Preparation of the specimen . 11 6.3 Conditioning/ageing 15 6.3.1 Connection componen
38、ts not embedded in concrete . 15 6.3.2 Connection components embedded in concrete . 15 6.4 Electrical test 16 6.5 Static mechanical test . 17 6.5.1 General . 17 6.5.2 Test procedure 17 6.6 Marking test 17 7 Electromagnetic compatibility (EMC) . 17 8 Structure and content of the test report 18 8.1 Ge
39、neral . 18 8.2 Report identification 18 8.3 Specimen description 18 8.4 Conductor . 18 8.5 Standards and references . 18 8.6 Test procedure 19 8.7 Testing equipment description 19 8.8 Measuring instruments description 19 8.9 Results and parameters recorded . 19 8.10 Statement of pass/fail . 19 BS EN
40、 62561-1:2017IEC 62561-1:2017 IEC 2017 3 Annex A (normative) Summary of the requirements and corresponding tests . 20 Annex B (informative) Typical connection configurations for various LPSCs . 21 Annex C (normative) Flow chart of tests for connection components 22 Annex D (normative) Conditioning/a
41、geing for connection components . 24 D.1 General . 24 D.2 Salt mist treatment 24 D.3 Humid sulphurous atmosphere treatment 24 D.4 Ammonia atmosphere treatment 24 Bibliography 25 Figure 1 Basic arrangement of specimen with cross-connection component . 12 Figure 2 Basic arrangement of specimen with pa
42、rallel connection component 13 Figure 3 Basic arrangement of specimen with bridging component . 14 Figure 4 Basic arrangement of specimen with equipotential bonding bar 15 Figure 5 Basic arrangement for contact measurement of expansion piece 17 Figure B.1 Typical arrangements for various LPSCs 21 Fi
43、gure C.1 Flow chart of tests for connection components . 23 Table 1 Lightning impulse current (Iimp) parameters 16 Table A.1 Requirements and corresponding tests 20 BS EN 62561-1:2017IEC 62561-1:2017 IEC 2017 3 Annex A (normative) Summary of the requirements and corresponding tests . 20 Annex B (inf
44、ormative) Typical connection configurations for various LPSCs . 21 Annex C (normative) Flow chart of tests for connection components 22 Annex D (normative) Conditioning/ageing for connection components . 24 D.1 General . 24 D.2 Salt mist treatment 24 D.3 Humid sulphurous atmosphere treatment 24 D.4
45、Ammonia atmosphere treatment 24 Bibliography 25 Figure 1 Basic arrangement of specimen with cross-connection component . 12 Figure 2 Basic arrangement of specimen with parallel connection component 13 Figure 3 Basic arrangement of specimen with bridging component . 14 Figure 4 Basic arrangement of s
46、pecimen with equipotential bonding bar 15 Figure 5 Basic arrangement for contact measurement of expansion piece 17 Figure B.1 Typical arrangements for various LPSCs 21 Figure C.1 Flow chart of tests for connection components . 23 Table 1 Lightning impulse current (Iimp) parameters 16 Table A.1 Requi
47、rements and corresponding tests 20 4 IEC 62561-1:2017 IEC 2017 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) Part 1: Requirements for connection components FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for stan
48、dardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes In
49、ternational Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely wit
