1、BSI Standards PublicationRadio frequency (RF) bulk acoustic wave (BAW) filters of assessed qualityPart 1: Generic specificationBS EN 62575-1:2016National forewordThis British Standard is the UK implementation of EN 62575-1:2016. It isidentical to IEC 62575-1:2015.The UK participation in its preparat
2、ion was entrusted to TechnicalCommittee EPL/49, Piezoelectric devices for frequency control and selection.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are
3、 responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 77859 9ICS 31.140Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStanda
4、rds Policy and Strategy Committee on 31 March 2016.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62575-1:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62575-1 February 2016 ICS 31.140 English Version Radio frequency (RF) bulk acoustic wave (BAW) fil
5、ters of assessed quality - Part 1: Generic specification (IEC 62575-1:2015) Filtres radiofrquences (RF) ondes acoustiques de volume (OAV) sous assurance de la qualit - Partie 1: Spcification gnrique (IEC 62575-1:2015) Volumenwellen-(BAW-)Filter mit bewerteter Qualitt fr Hochfrequenz-(HF-)Anwendungen
6、 - Teil 1: Fachgrundspezifikation (IEC 62575-1:2015) This European Standard was approved by CENELEC on 2015-12-03. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without
7、any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other
8、language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
9、 the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the U
10、nited Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any mean
11、s reserved worldwide for CENELEC Members. Ref. No. EN 62575-1:2016 E BS EN 62575-1:2016EN 62575-1:2016 2 European foreword The text of document 49/1163/FDIS, future edition 1 of IEC 62575-1, prepared by IEC/TC 49 “Piezoelectric, dielectric and electrostatic devices and associated materials for frequ
12、ency control, selection and detection“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62575-1:2016. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsemen
13、t (dop) 2016-09-03 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-12-03 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible fo
14、r identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62575-1:2015 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated
15、: IEC 60368 Series NOTE Harmonized as EN 60368 Series. IEC 60862-1:2015 NOTE Harmonized as EN 60862-1:2015 (not modified). IEC 61000-4-2 NOTE Harmonized as EN 61000-4-2. IEC 62604-1:2015 NOTE Harmonized as EN 62604-1:2015 (not modified) BS EN 62575-1:2016EN 62575-1:2016 3 Annex ZA (normative) Normat
16、ive references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated reference
17、s, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards list
18、ed in this annex is available here: www.cenelec.eu Publication Year Title EN/HD Year IEC 60027 Series Letter symbols to be used in electrical technology EN 60027 Series IEC 60050-561 - International electrotechnical vocabulary (IEV) - Part 561: Piezoelectric, dielectric and electrostatic devices and
19、 associated materials for frequency control, selection and detection - - IEC 60068-1 2013 Environmental testing - Part 1: General and guidance EN 60068-1 2014 IEC 60068-2-1 - Environmental testing - Part 2-1: Tests - Test A: Cold EN 60068-2-1 - IEC 60068-2-2 - Environmental testing - Part 2-2: Tests
20、 - Test B: Dry heat EN 60068-2-2 - IEC 60068-2-6 - Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) EN 60068-2-6 - IEC 60068-2-7 - Basic environmental testing procedures - Part 2-7: Tests - Test Ga and guidance: Acceleration, steady state EN 60068-2-7 - IEC 60068-2-13 - Basi
21、c environmental testing procedures - Part 2-13: Tests - Test M: Low air pressure EN 60068-2-13 - IEC 60068-2-14 - Environmental testing - Part 2-14: Tests - Test N: Change of temperature EN 60068-2-14 - IEC 60068-2-17 1994 Basic environmental testing procedures - Part 2-17: Tests - Test Q: Sealing E
22、N 60068-2-17 1994 IEC 60068-2-21 - Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices EN 60068-2-21 - IEC 60068-2-27 - Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock EN 60068-2-27 - IEC 60068-2-30 - Environmental testin
23、g - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) EN 60068-2-30 - BS EN 62575-1:2016EN 62575-1:2016 4 Publication Year Title EN/HD Year IEC 60068-2-31 - Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens EN 60068-2-31
24、 - IEC 60068-2-45 - Basic environmental testing procedures - Part 2-45: Tests - Test XA and guidance: Immersion in cleaning solvents EN 60068-2-45 - IEC 60068-2-52 - Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution) EN 60068-2-52 - IEC 60068-2-58 - Envi
25、ronmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) EN 60068-2-58 - IEC 60068-2-64 - Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guid
26、ance EN 60068-2-64 - IEC 60068-2-78 - Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state EN 60068-2-78 - IEC 60122-1 - Quartz crystal units of assessed quality - Part 1: Generic specification EN 60122-1 - IEC 60617-DB - Graphical symbols for diagrams - - IEC 60642 - Piezoel
27、ectric ceramic resonators and resonator units for frequency control and selection - Chapter I: Standard values and conditions - Chapter II: Measuring and test conditions - - IEC 60695-11-5 - Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrang
28、ement and guidance EN 60695-11-5 - IEC 60749-28 1)- Semiconductor devices - Mechanical and climatic test methods - Part 28: Electrostatic Discharge (ESD) Sensitivity Testing Direct contact charged device model (DC-CDM) EN 60749-28 1)- IEC 61340-3-1 - Electrostatics - Part 3-1: Methods for simulation
29、 of electrostatic effects - Human body model (HBM) electrostatic discharge test waveforms EN 61340-3-1 - IEC 61340-3-2 - Electrostatics - Part 3-2: Methods for simulation of electrostatic effects - Machine model (MM) electrostatic discharge test waveforms EN 61340-3-2 - ISO 80000-1 - Quantities and
30、units - Part 1: General EN ISO 80000-1 - 1)At draft stage. BS EN 62575-1:2016 2 IEC 62575-1:2015 IEC 2015 CONTENTS FOREWORD . 5 INTRODUCTION . 7 1 Scope 8 2 Normative references. 8 3 Terms, definitions, units and symbols . 9 3.1 Terms and definitions 9 3.2 Units and symbols . 15 4 Preferred values f
31、or ratings and characteristics 15 4.1 General . 15 4.2 Nominal frequencies 15 4.3 Operating temperature ranges, in degrees Celsius (C) 16 4.4 Climatic category 16 4.5 Bump severity . 16 4.6 Vibration severity 17 4.7 Shock severity 17 4.8 Fine leak rate 17 5 Marking . 18 5.1 Filter marking 18 5.2 Pac
32、kage marking 18 6 Quality assessment procedures . 18 6.1 General . 18 6.2 Primary stage of manufacture 18 6.3 Structurally similar components . 18 6.4 Subcontracting 18 6.5 Incorporated components 18 6.6 Manufacturers approval 19 6.7 Approval procedures . 19 6.7.1 General . 19 6.7.2 Capability appro
33、val 19 6.7.3 Qualification approval 19 6.8 Procedures for capability approval . 19 6.8.1 General . 19 6.8.2 Eligibility for capability approval . 20 6.8.3 Application for capability approval 20 6.8.4 Granting of capability approval . 20 6.8.5 Capability manual 20 6.9 Procedures for qualification app
34、roval . 20 6.9.1 General . 20 6.9.2 Eligibility for qualification approval 20 6.9.3 Application for qualification approval 20 6.9.4 Granting of qualification approval . 20 6.9.5 Quality conformance inspection 20 6.10 Test procedures 20 6.11 Screening requirements 20 6.12 Rework and repair work . 21
35、6.12.1 Rework 21 BS EN 62575-1:2016IEC 62575-1:2015 IEC 2015 3 6.12.2 Repair work . 21 6.13 Certified records of released lots . 21 6.14 Validity of release . 21 6.15 Release for delivery 21 6.16 Unchecked parameters 21 7 Test and measurement procedures 21 7.1 General . 21 7.2 Test and measurement c
36、onditions . 21 7.2.1 Standard conditions of testing 21 7.2.2 Precision of measurement 22 7.2.3 Precautions 22 7.2.4 Alternative test methods . 22 7.3 Visual inspection . 22 7.3.1 General . 22 7.3.2 Visual test A 22 7.3.3 Visual test B 23 7.3.4 Visual test C 23 7.4 Dimensions and gauging procedures .
37、 23 7.4.1 Dimensions test A 23 7.4.2 Dimensions test B 23 7.5 Electrical test procedures 23 7.5.1 General . 23 7.5.2 Insertion attenuation measurement . 23 7.5.3 Return attenuation measurement 25 7.5.4 Intermodulation distortion measurement . 27 7.5.5 Measurement of insertion attenuation characteris
38、tics at specified terminating impedances and at standard atmospheric conditions . 28 7.5.6 Measurement of insertion attenuation characteristics as a function of temperature . 28 7.5.7 Measurement of return attenuation at specified terminating impedance and at the standard atmospheric conditions 28 7
39、.5.8 Measurement of intermodulation distortion at standard atmospheric conditions 28 7.5.9 Measurement method for the balanced type filter 29 7.5.10 Insulation resistance 30 7.5.11 Voltage proof . 30 7.6 Mechanical and environmental test procedures 30 7.6.1 Robustness of terminations (destructive) 3
40、0 7.6.2 Sealing tests (non-destructive) . 31 7.6.3 Soldering (solderability and resistance to soldering heat) (destructive) 31 7.6.4 Rapid change of temperature: severe shock by liquid immersion (non-destructive) 31 7.6.5 Rapid change of temperature with prescribed time of transition (non-destructiv
41、e) 32 7.6.6 Bump (destructive) . 32 7.6.7 Vibration (destructive) 32 7.6.8 Shock (destructive) 33 7.6.9 Free fall (destructive) . 33 7.6.10 Acceleration, steady state (non-destructive) . 33 7.6.11 Low air pressure (non-destructive) . 33 BS EN 62575-1:2016 4 IEC 62575-1:2015 IEC 2015 7.6.12 Dry heat
42、(non-destructive) 33 7.6.13 Damp heat, cyclic (destructive) . 33 7.6.14 Cold (non-destructive) 34 7.6.15 Climatic sequence (destructive) 34 7.6.16 Damp heat, steady state (destructive) . 34 7.6.17 Salt mist cyclic (destructive) . 34 7.6.18 Immersion in cleaning solvents (non-destructive) 34 7.6.19 F
43、lammability test (destructive) 34 7.6.20 Electrostatic discharge (ESD) sensitivity test (destructive) 34 7.7 Endurance test procedure . 35 Bibliography . 36 Figure 1 FBAR configuration 10 Figure 2 SMR configuration 11 Figure 3 Frequency response of RF BAW filters 15 Figure 4 Insertion attenuation me
44、asurement . 24 Figure 5 Return attenuation measurement 25 Figure 6 Intermodulation distortion measurement 28 Figure 7 Four-port network analyser measurement for balanced-balanced-connection filter 29 Figure 8 Three-port network analyser measurement for unbalanced-balanced-connection filter 30 Table
45、1 Frequency allocation of typical UMTS bands 16 BS EN 62575-1:2016IEC 62575-1:2015 IEC 2015 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ RADIO FREQUENCY (RF) BULK ACOUSTIC WAVE (BAW) FILTERS OF ASSESSED QUALITY Part 1: Generic specification FOREWORD 1) The International Electrotechnical Commission
46、(IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addi
47、tion to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interes
48、ted in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with
49、 conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. Whil