1、BSI Standards PublicationElectronic railway equipment On board driving data recording systemPart 1: System specificationBS EN 62625-1:2013Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted
2、without license from IHS-,-,-National forewordThis British Standard is the UK implementation of EN 62625-1:2013. It isidentical to IEC 62625-1:2013.The UK participation in its preparation was entrusted to TechnicalCommittee GEL/9, Railway Electrotechnical Applications.A list of organizations represe
3、nted on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2013.Published by BSI Standards Limited 2013ISBN 978 0 580 67
4、581 2ICS 45.060Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 November 2013.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS
5、EN 62625-1:2013Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EUROPEAN STANDARD EN 62625-1 NORME EUROPENNE EUROPISCHE NORM November 2013 CENELEC European Co
6、mmittee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide f
7、or CENELEC members. Ref. No. EN 62625-1:2013 E ICS 45.060 English version Electronic railway equipment - On board driving data recording system - Part 1: System specification (IEC 62625-1:2013) Matriel lectronique ferroviaire - Systme embarqu denregistrement de donnes de conduite - Partie 1: Spcific
8、ation du systme (CEI 62625-1:2013) Elektronische Betriebsmittel fr Bahnen - Bordsystem zur Fahrdatenaufzeichnung - Teil 1: Systemspezifikation (IEC 62625-1:2013) This European Standard was approved by CENELEC on 2013-10-17. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulation
9、s which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member
10、. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
11、 CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Net
12、herlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 62625-1:2013Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permit
13、ted without license from IHS-,-,-EN 62625-1:2013 - 2 - Foreword The text of document 9/1820/FDIS, future edition 1 of IEC 62625-1, prepared by IEC/TC 9 “Electrical equipment and systems for railways“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62625-1:2013. The follo
14、wing dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2014-07-17 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2016-10-17 Attentio
15、n is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62625-1:2013 was approved by CEN
16、ELEC as a European Standard without any modification. BS EN 62625-1:2013Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- 3 - EN 62625-1:2013 Annex ZA (normat
17、ive) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undate
18、d references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60571 - Railway applications - Elect
19、ronic equipment used on rolling stock EN 50155 - IEC 61375 Series Electronic railway equipment - Train communication network (TCN) EN 61375 Series IEC 62498-1 - Railway applications - Environmental conditions for equipment - Part 1: Equipment on board rolling stock EN 50125-1 - ISO/IEC 8824 Series I
20、nformation technology - Abstract Syntax Notation One (ASN.1): Specification of basic notation - - BS EN 62625-1:2013Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from I
21、HS-,-,- 2 62625-1 IEC:2013 CONTENTS INTRODUCTION . 5 1 Scope . 6 2 Normative references 6 3 Terms, definitions, abbreviations, acronyms, and conventions . 7 3.1 Terms and definitions 7 3.2 Abbreviations and acronyms 8 3.3 Conventions 8 3.3.1 Base of numeric values 8 3.3.2 Naming conventions . 9 4 Re
22、quirements . 9 4.1 General . 9 4.2 Functional requirements 9 4.2.1 Record train data . 9 4.2.2 Ensure on board protection of recorded data 9 4.2.3 Ensure retrieval of recorded data . 10 4.2.4 Enable recorded data analysis . 10 4.2.5 Optional functions 11 4.3 System requirements . 11 4.3.1 On board d
23、riving data recording system . 11 4.3.2 Optional modes 18 4.4 Use cases . 18 5 Conformity statement 18 Annex A (informative) Italian use case 19 Annex B (informative) Japanese use case 23 Annex C (informative) German use case 25 Annex D (informative) Chinese use case 26 Annex E (informative) Functio
24、nal breakdown structure Overview (extract from EN 15380-4) . 27 Annex F (informative) Check list of monitored and recorded data 30 Bibliography 34 Figure 1 ODDRS modes . 12 Figure 2 ODDRS optional modes 18 Figure A.1 SCMT and the related subsystems and devices . 20 Figure A.2 Structure of DIS remote
25、 servers and central computing systems 21 Figure A.3 Example of DIS data analysis 22 Table 1 Parameter values of the protection capability . 14 Table 2 Minimum recorded data list 15 Table 3 ODDR Unit input requirements . 17 Table E.1 ODDRS allocation in EN 15380-4 29 Table F.1 Recorded data features
26、 31 BS EN 62625-1:2013Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-62625-1 IEC:2013 5 INTRODUCTION In the railway market over the last decade, the demand
27、for event recorders onboard of trains, metros and trams, has continuously increased. The operators are asking for more and more recorders beyond the simple recording of speed, distance and elapsed time. Consequently, many national safety authorities in many countries around the world require the ins
28、tallation of on board event recording system. Herein some examples are listed: In Japan, the Ministry of Land, Infrastructure and Transport revised “Shorei (The Ministerial regulation of Japan)“ in 2006 for implementing juridical recorder. This regulation requires the railway authorities having cons
29、tant operational requirements to install juridical recorders. In the USA, the Federal Railroad Administration issued in 2005 the “Final Rule 49 CFR Part 229”. The rule requires that the leading locomotives of all the USA trains are equipped with compliant event recorders. In the UK, the regulation G
30、M/RT 2472 requires that the majority of trains operating on the network rail controlled by infrastructure are fitted with a compliant on train data recorder. In Europe, the technical specifications for interoperability for the control-command system and for Operation require the implementation of a
31、Juridical Recording Unit when running on the trans european network (TEN) (Directive 2008/57/EC of the European parliament and of the council). Today, it is necessary to set a common specification that can be referred to by the regulations issued by each national safety authority to harmonize these
32、requirements, to simplify the rolling stock design and to ensure a cost effective implementation. The aim of this standard is to fulfil this target. In addition to the usual benefits of standardization for the railway stakeholders (e.g. cost reduction), this standard has the following benefit: Achie
33、vement of a specification of a worldwide juridical event recorder that respects the minimum requirements necessary for the interoperability of trains crossing the borders of countries around the world (e.g. Europe, Asia, USA/Canada). The goals of the on board driving data recording system are to ena
34、ble the checking of train operation according to the driving rules through recording the events of train operation. According to national laws, this checking can be used for enquiry after an accident or incident or for the regular monitoring of the drivers ability and qualification to operate the tr
35、ain. BS EN 62625-1:2013Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- 6 62625-1 IEC:2013 ELECTRONIC RAILWAY EQUIPMENT ON BOARD DRIVING DATA RECORDING SYSTE
36、M Part 1: System specification 1 Scope This part of IEC 62625 covers the specification of an on board driving data recording system for the purpose of recording data about the operation of the train. The data refers both to the driver behaviour and the on board systems behaviour to support systemati
37、c safety monitoring as a means of preventing incidents and accidents. The data is recorded in a way that is suitable for identifying cause and where possible consequence, such that the data is suitable: for investigative use in case of accidents and incidents; to monitor the appropriate actions of d
38、rivers. The conformance test procedure will be covered by a future standard in the IEC 62625 series. This standard specifies the requirements for a universal recording system that is applicable to all types of rail vehicles. Requirements and responsibilities for the management and retention of the d
39、ata to ensure that its integrity is maintained once it has been extracted from the recording device lie outside the scope of this standard. Application of this standard is subsidiary to the responsibility of the transport authority and the safety regulatory authority and to the specific laws and dec
40、rees where the ODDRS (on board driving data recording system) is deployed. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated ref
41、erences, the latest edition of the referenced document (including any amendments) applies. IEC 60571, Railway applications Electronic equipment used on rolling stock IEC 61375 (all parts), Electronic railway equipment Train communication network (TCN) IEC 62498-1, Railway applications Environmental
42、conditions for equipment Part 1: Equipment on board rolling stock ISO/IEC 8824 (all parts), Information technology Abstract Syntax Notation One (ASN.1) BS EN 62625-1:2013Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for ResaleNo repro
43、duction or networking permitted without license from IHS-,-,-62625-1 IEC:2013 7 3 Terms, definitions, abbreviations, acronyms, and conventions 3.1 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1.1 accident an unintended event or series of event
44、s that results in death, injury, loss of a system or service, or environmental damage Note 1 to entry: Accidents are divided into the following categories: collisions, derailments, level crossing accidents, accidents to persons caused by rolling stock in motion, fires and others. 3.1.2 consist singl
45、e vehicle or a group of vehicles which are not separated during normal operation Note 1 to entry: Train set and rake of coaches are synonyms. Note 2 to entry: A consist may contain one or more traction units. EXAMPLE The vehicles of a consist are steadily connected in a workshop, and automatic coupl
46、ers are mounted at both ends of the consist to facilitate the coupling and de-coupling of complete consists in the workshop or during operation. 3.1.3 incidents any occurrence, other than accident or serious accident, associated with the operation of trains and which may affect the safety of operati
47、on 3.1.4 monitoring data data related to the monitoring of the driver competence 3.1.5 non-volatile storage medium memory and the relevant interface circuitry, which store the data for investigative use in case of accidents and incidents Note 1 to entry: The non-volatile storage medium may be protec
48、ted. 3.1.6 ODDR unit physical unit which implements the ODDRS Note 1 to entry: ODDRS may be implemented by one or more ODDR units. 3.1.7 resolution smallest change in the measurand, or stored quantity, which causes a perceptible change in the indication SOURCE: IEC 60050-311:2001, 311-03-10, modified 3.1.8 train safety functions technical barrier to prevent a hazard to become an accident during the train operation BS EN 62625-1:2013Copyright European Committee for Electrotechnical Standardization Provided by IHS under license with CENELECNot for Re
