1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards Publication3D display devicesPart 22-1: Measuring methods for autostereoscopic displays OpticalBS EN 62629-22-1:2013National forewordThis British Standard is the UK implementation of EN 626
2、29-22-1:2013. It isidentical to IEC 62629-22-1:2013.The UK participation in its preparation was entrusted to Technical CommitteeEPL/47, Semiconductors.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the
3、 necessary provisions of acontract. Users are responsible for its correct application. The British Standards Institution 2013Published by BSI Standards Limited 2013ISBN 978 0 580 67901 8ICS 31.120; 31.260Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Sta
4、ndard was published under the authority of the StandardsPolicy and Strategy Committee on 31 May 2013.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 62629-22-1:2013EUROPEAN STANDARD EN 62629-22-1 NORME EUROPENNE EUROPISCHE NORM May 2013 CENELEC European Committee
5、for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
6、Ref. No. EN 62629-22-1:2013 E ICS 31.120; 31.260 English version 3D display devices - Part 22-1: Measuring methods for autostereoscopic displays - Optical (IEC 62629-22-1:2013) Dispositifs daffichage 3D - Partie 22-1 : Mthodes de mesure des crans autostroscopiques - Optique (CEI 62629-22-1:2013) 3D-
7、Anzeigen - Teil 22-1: Messverfahren fr auto-stereoskopische Anzeigen - Optisch (IEC 62629-22-1:2013) This European Standard was approved by CENELEC on 2013-03-13. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Sta
8、ndard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (E
9、nglish, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees
10、 of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Sloven
11、ia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 62629-22-1:2013EN 62629-22-1:2013 - 2 - Foreword The text of document 110/428/FDIS, future edition 1 of IEC 62629-22-1, prepared by IEC/TC 110 “Electronic display devices“ was submitted to the IEC-CENELEC parallel vote and approved
12、 by CENELEC as EN 62629-22-1:2013. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2013-12-13 latest date by which the national standards conflicting with the document ha
13、ve to be withdrawn (dow) 2016-03-13 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International S
14、tandard IEC 62629-22-1:2013 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61747-6:2004 NOTE Harmonised as EN 61747-6:2004 (not modified). IEC 62341-6-1:2009 NOT
15、E Harmonised as EN 62341-6-1:2011 (not modified). ISO 9241-302:2008 NOTE Harmonised as EN ISO 9241-302:2008 (not modified). ISO 9241-305:2008 NOTE Harmonised as EN ISO 9241-305:2008 (not modified). ISO 9241-306:2008 NOTE Harmonised as EN ISO 9241-306:2008 (not modified). BS EN 62629-22-1:2013- 3 - E
16、N 62629-22-1:2013 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the
17、 edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 62
18、629-1-2 1)- 3D Display devices - Part 1-2: Generic - Terminology and letter symbols EN 62629-1-2 1)- CIE 15 2004 Colorimetry - - CIE 69 1987 Methods of characterizing illuminance meters and luminance meters - - 1)At draft stage. BS EN 62629-22-1:2013 2 62629-22-1 IEC:2013 CONTENTS 1 Scope . 7 2 Norm
19、ative references . 7 3 Terms, definitions and abbreviations 7 3.1 Terms and definitions 7 3.2 Abbreviations 7 4 Standard measuring conditions . 8 4.1 Standard environmental conditions 8 4.1.1 Temperature, humidity and pressure conditions . 8 4.1.2 Illumination conditions . 8 4.2 Light measuring devi
20、ce 8 4.2.1 General . 8 4.2.2 Aperture size . 9 4.3 Measuring setup 9 4.3.1 Designed viewing distance 9 4.3.2 Measurement area . 10 4.3.3 Measuring layout . 10 4.4 Test signal 12 4.5 Standard measuring points 13 5 Measuring method for two-view/multi-view displays 14 5.1 Maximum luminance direction .
21、14 5.1.1 General . 14 5.1.2 Measuring equipment 14 5.1.3 Measuring conditions . 15 5.1.4 Measuring procedure . 15 5.1.5 Measurement report 15 5.2 Lobe angle and lobe angle variation on screen 16 5.2.1 General . 16 5.2.2 Measuring equipment 16 5.2.3 Measuring conditions . 16 5.2.4 Measuring procedure
22、 . 16 5.2.5 Measurement report 16 5.3 Luminance, screen luminance uniformity, and angular luminance variation 17 5.3.1 Luminance and screen luminance uniformity 17 5.3.2 Angular luminance variation . 19 5.4 White chromaticity, white chromaticity uniformity on screen, and white chromaticity variation
23、 in angle . 20 5.4.1 White chromaticity and white chromaticity uniformity on screen . 20 5.4.2 White chromaticity angular variation 21 5.5 3D crosstalk (luminance components ratio), 3D crosstalk variation on screen, and 3D crosstalk variation in angle 23 5.5.1 3D crosstalk (luminance components rati
24、o) and 3D crosstalk variation on screen 23 5.5.2 3D crosstalk angular variation 25 6 Standard measuring method for integral imaging displays (1-D/2-D) . 26 6.1 General . 26 6.2 Lobe angle and lobe angle variation on screen 27 BS EN 62629-22-1:201362629-22-1 IEC:2013 3 6.3 Luminance, screen luminance
25、 uniformity, and angular luminance variation 27 6.3.1 Luminance and screen luminance uniformity 27 6.3.2 Angular luminance variation . 27 6.4 White chromaticity, white chromaticity uniformity on screen, and white chromaticity variation in angle . 27 6.4.1 White chromaticity and white chromaticity un
26、iformity on screen . 27 6.4.2 White chromaticity variation in angle 27 Annex A (informative) Principle of autostereoscopic display . 28 Annex B (informative) Angular profile of luminance 32 Bibliography 33 Figure 1 Measuring system 9 Figure 2 Measuring layout for centre point measurement . 10 Figure
27、 3 Measuring layout for multi-point measurement (side view) 11 Figure 4 Other measuring layout for multi-point measurement (side view) 11 Figure 5 Measuring layout for horizontal viewing direction dependency 12 Figure 6 Measuring layout for vertical viewing direction dependency 12 Figure 7 Two examp
28、les of the relation between pixel and lenslet in multi-view display (number of views is N) 13 Figure 8 Measuring points for the centre and multi-point measurement 14 Figure 9 Example of n by m measuring points 14 Figure 10 Example of measurement results for angular luminance profile 15 Figure 11 Exa
29、mple of lobe angle measurement 17 Figure 12 Example of 3D crosstalk variation on screen 23 Figure 13 Example of acquired images in multi-view display 24 Figure 14 Spatial luminance data acquirement (left) and example of calculated spatial crosstalk graph (right) 25 Figure A.1 Structure of two-view d
30、isplay 28 Figure A.2 Basic principle of two-view display 29 Figure A.3 Structure of multi-view display 29 Figure A.4 Basic principle of multi-view display 30 Figure A.5 Basic principle of integral imaging display . 31 Figure B.1 Example of angular profile of luminance 32 Table 1 Example of reported
31、specification of two dimensional LMD 9 Table 2 Example of measurement results for maximum luminance direction . 16 Table 3 Example of measurement results for lobe angle variation on screen 17 Table 4 Example of measurement results for luminance and screen luminance non-uniformity 18 Table 5 Example
32、of measurement results for angular luminance variation 20 Table 6 Example of measurement results for white chromaticity and white chromaticity uniformity on screen 21 Table 7 Example of measurement results for white chromaticity variation in angle . 23 Table 8 Example of measurement results for 3D c
33、rosstalk variation on screen . 25 Table 9 Example of measurement results for 3D crosstalk angular variation 26 BS EN 62629-22-1:2013 4 62629-22-1 IEC:2013 Table B.1 Example of measurement results . 32 BS EN 62629-22-1:201362629-22-1 IEC:2013 7 3D DISPLAY DEVICES Part 22-1: Measuring methods for auto
34、stereoscopic displays Optical 1 Scope This part of IEC 62629-22 specifies optical measuring methods for autostereoscopic display devices. It defines general measuring procedures for optical characteristics of two-view and multi-view displays and integral imaging displays. 2 Normative references The
35、following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 62629-1
36、-2, 3D display devices Part 1-2: Generic Terminology and letter symbols1 CIE 15:2004, Colorimetry, 3rd Edition CIE 69:1987, Methods of characterizing illuminance meters and luminance meters 3 Terms, definitions and abbreviations 3.1 Terms and definitions For the purpose of this document, the terms a
37、nd definitions given in IEC 62629-1-2 apply. 3.2 Abbreviations For the purposes of this document, the following abbreviations apply. Abbreviation Definition CCD charge-coupled device DVD designed viewing distance FWHM full width half maximum FWTQM full width at three-quarter maximum LMD light measur
38、ing device 1To be published. BS EN 62629-22-1:2013 8 62629-22-1 IEC:2013 4 Standard measuring conditions 4.1 Standard environmental conditions 4.1.1 Temperature, humidity and pressure conditions Standard environmental conditions shall be applied for the measurements of autostereoscopic display devic
39、es. The standard environmental conditions for the measurements of autostereoscopic display devices are (25 5) C temperature, 45 % to 75 % relative humidity, and 86 kPa to 106 kPa pressure. 4.1.2 Illumination conditions Standard dark room conditions shall be applied. In standard dark room conditions,
40、 the illuminance at any position on the screen (the display device screen) is below 0,3 lx in all directions. NOTE Illuminance is measured without the measured display or in conditions where the display is turned off. 4.2 Light measuring device 4.2.1 General The LMD used for measurements of the disp
41、lays shall be checked for the following criteria and specified accordingly: aperture size (window function of LMD) (see 4.2.2); sensitivity of the measured quantity; errors caused by veiling glare and lens flare (i.e. stray light in optical system); timing of data-acquisition, low-pass filtering and
42、 aliasing-effects; linearity of detection and data-conversion; resolution and moir in the use of two-dimensional LMD. A point-measurement LMD, such as a spot luminance meter, or a two-dimensional LMD such as a CCD area detector shall be used for these measurements. A conoscopic type LMD can be used
43、for some measurements. When using a two-dimensional LMD and/or a conoscopic type LMD, they shall be calibrated, so that the measurement results correspond to those of the point-measurement LMD. The specification of the LMD used shall be noted in the report as in the example shown in Table 1. NOTE 1
44、The point-measurement LMD measures the luminance and/or colour coordinate at each measurement point on the screen. A two-dimensional LMD measures the map of luminance and/or colour coordinate over the measurement area of the screen. A conoscopic type LMD measures the directional characteristics of l
45、uminance and/or colour coordinate at each measurement point on the screen. NOTE 2 A point-measurement LMD usually has higher sensitivity than a two-dimensional LMD. A two-dimensional LMD measures the uniformity of the measuring area more easily than a point-measurement LMD. BS EN 62629-22-1:20136262
46、9-22-1 IEC:2013 9 Table 1 Example of reported specification of two dimensional LMD CCD resolution 4 096 2 048 CCD A/D dynamic range More than 12 bits = 4 096 gray scale levels Wavelength range 380 nm to 780 nm System accuracy Luminance variation 3 % CIE 1931 chromaticity coordinates (x, y) 0,003 Col
47、orimetric filters CIE 1931 colour matching functions for a 20observer 4.2.2 Aperture size The aperture size (entrance pupil, see CIE 69) of an LMD including point measurement and two-dimensional type LMDs (smaller than the size of the object lens of the LMD) shall be equal to or smaller than 8 mm. W
48、hen a larger aperture LMD is used, the measurement results shall be checked so that the results are equivalent to those of the smaller aperture LMD. The aperture size shall be reported by the supplier (the manufacturer of the 3D display device) in the relevant specification. NOTE In the measurement
49、of autostereoscopic displays, the aperture size of the LMD greatly affects the measurement results. So the LMD aperture size is defined in this document. The aperture size similar to the size of the pupil of an eye is ideal for the measurements (e.g. crosstalk), but smaller aperture decreases sensitivity. The size of 8 mm is small enough for the measurement and large enough for the sensitivity. The exact value of the
