1、BSI Standards PublicationFibre optic interconnecting devices and passive components Fibre optic connector product specificationsPart 1-1: LC-PC duplex multimode connectors terminated on IEC 60793-2-10 category A1a fibreBS EN 62664-1-1:2013Copyright British Standards Institution Provided by IHS under
2、 license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-National forewordThis British Standard is the UK implementation of EN 62664-1-1:2013. It isidentical to IEC 62664-1-1:2013.BSI, as a member of CEN, is obliged to publish EN 62664-
3、1-1 as a BritishStandard. However, attention is drawn to the fact that during the development of this European Standard, the UK committee voted againstits approval as a European Standard. Some parts of this standard are based upon sections of EN 50377-7-1:2004.Test methods 8 and 10 in Table 8 of EN
4、62664-1-1 make reference toVariations B01 and B02, which are not referenced in clause 4 (Variants) ofthis standard, but which do appear in Tables 2 and 3 of EN 50377-7-1:2004.Additionally, Figure 8 of EN 62664-1-1 is based upon Figure 3b in EN50377-7-1:2004, however the UK committee noted that Figur
5、e 8 uses mas a unit, rather than the nm unit that appears in the original.The UK participation in its preparation was entrusted by TechnicalCommittee GEL/86, Fibre optics, to Subcommittee GEL/86/2, Fibre opticinterconnecting devices and passive components.A list of organizations represented on this
6、subcommittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2014Published by BSI Standards Limited 2014ISBN 978 0 580 72641 5ICS 3
7、3.180.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 March 2014.Amendments/corrigenda issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS E
8、N 62664-1-1:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-EUROPEAN STANDARD EN 62664-1-1 NORME EUROPENNE EUROPISCHE NORM May 2013 CENELEC European Committee for
9、 Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref
10、. No. EN 62664-1-1:2013 E ICS 33.180.20 English version Fibre optic interconnecting devices and passive components - Fibre optic connector product specifications - Part 1-1: LC-PC duplex multimode connectors terminated on IEC 60793-2-10 category A1a fibre (IEC 62664-1-1:2013) Dispositifs dinterconne
11、xion et composants passifs fibres optiques - Spcifications de produits pour connecteurs fibres optiques - Partie 1-1: Connecteurs multimodaux duplex LC-PC cbls sur une fibre de catgorie A1a selon la CEI 60793-2-10 (CEI 62664-1-1:2013) Lichtwellenleiter - Verbindungselemente und passive Bauteile - Li
12、chtwellenleiter - Steckverbinder Produktnormen - Teil 1-1: LC-PC-Duplex Mehrmoden-Steckverbinder zum Anschluss an Fasern der Kategorie A1a nach IEC 60793-2-10 (IEC 62664-1-1:2013) This European Standard was approved by CENELEC on 2013-03-27. CENELEC members are bound to comply with the CEN/CENELEC I
13、nternal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to
14、any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
15、official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembou
16、rg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 62664-1-1:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networ
17、king permitted without license from IHS-,-,-EN 62664-1-1:2013 - 2 - Foreword The text of document 86B/3550/FDIS, future edition 1 of IEC 62664-1-1, prepared by SC 86B, “Fibre optic interconnecting devices and passive components“, of IEC TC 86, “Fibre optics“ was submitted to the IEC-CENELEC parallel
18、 vote and approved by CENELEC as EN 62664-1-1:2013. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2013-12-27 latest date by which the national standards conflicting wit
19、h the document have to be withdrawn (dow) 2016-03-27 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of th
20、e International Standard IEC 62664-1-1:2013 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60794-2-11 NOTE Harmonised as EN 60794-2-11. IEC 60794-2-50 NOTE Harmo
21、nised as EN 60794-2-50. IEC 61300 series NOTE Harmonised in EN 61300 series. IEC 61300-3-23 NOTE Harmonised as EN 61300-3-23. IEC 61300-3-35 NOTE Harmonised as EN 61300-3-35. IEC 61753-022-2 NOTE Harmonised as EN 61753-022-2. IEC 61754-20 NOTE Harmonised as EN 61754-20. ISO 8015 NOTE Harmonised as E
22、N ISO 8015. BS EN 62664-1-1:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,- 3 - EN 62664-1-1:2013 Annex ZA (normative) Normative references to international publ
23、ications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referen
24、ced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60793-2-10 - Optical fibres - Part 2-10: Product specifications - Sectional specifi
25、cation for category A1 multimode fibres EN 60793-2-10 - IEC 61300-2-1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal) EN 61300-2-1 - IEC 61300-2-2 - Fibre optic interconnecting devices and passive compone
26、nts - Basic test and measurement procedures - Part 2-2: Tests - Mating durability EN 61300-2-2 - IEC 61300-2-4 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention EN 61300-2-4 - IEC 61300-2-6 - Fibre optic int
27、erconnecting devices and passive components - Basic test and measurement procedures - Part 2-6: Tests - Tensile strength of coupling mechanism EN 61300-2-6 - IEC 61300-2-12 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-12: Tests - Impac
28、t EN 61300-2-12 - IEC 61300-2-17 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-17: Tests - Cold EN 61300-2-17 - IEC 61300-2-18 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2
29、-18: Tests - Dry heat - High temperature endurance EN 61300-2-18 - IEC 61300-2-19 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19: Tests - Damp heat (steady state) EN 61300-2-19 - IEC 61300-2-22 - Fibre optic interconnecting devices an
30、d passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature EN 61300-2-22 - BS EN 62664-1-1:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without
31、 license from IHS-,-,-EN 62664-1-1:2013 - 4 - Publication Year Title EN/HD Year IEC 61300-2-42 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-42: Tests - Static side load for connectors EN 61300-2-42 - IEC 61300-2-44 - Fibre optic interc
32、onnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices EN 61300-2-44 - IEC 61300-3-6 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6: Exa
33、minations and measurements - Return loss EN 61300-3-6 - IEC 61300-3-28 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-28: Examinations and measurements - Transient loss EN 61300-3-28 - IEC 61300-3-34 - Fibre optic interconnecting devices
34、 and passive components - Basic test and measurement procedures - Part 3-34: Examinations and measurements - Attenuation of random mated connectors EN 61300-3-34 - IEC 62614 - Fibre optics - Launch condition requirements for measuring multimode attenuation EN 62614 - ISO/IEC 11801 - Information tech
35、nology - Generic cabling for customer premises - - BS EN 62664-1-1:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,- 2 62664-1-1 IEC:2013 CONTENTS 1 Scope . 7 2 No
36、rmative references . 7 3 Description . 8 3.1 General . 8 3.1.1 Intermateability and interoperation . 8 3.1.2 Operating environment 8 3.1.3 Reliability 8 3.1.4 Quality assurance 9 3.2 Plug 9 3.3 Adaptor . 9 3.4 Materials . 9 3.5 Dimensions . 9 3.6 Colour and marking . 9 4 Variants 10 4.1 Terminated p
37、lug 10 4.2 Adaptor . 10 4.3 Identification of variants 10 5 Dimensional requirements 10 5.1 Outline dimensions 10 5.1.1 Plug variants . 10 5.1.2 Adaptor variants 12 5.2 Mating face and other limit dimensions 13 5.2.1 Plug . 13 5.2.2 Ferrule endface geometry after termination . 16 5.2.3 Adaptor . 18
38、5.2.4 Pin gauge for adaptor 21 6 Tests 22 6.1 Sample size 22 6.2 Test and measurement methods 22 6.3 Test sequence . 22 6.4 Pass/fail criteria 22 7 Test report 22 8 Performance requirements . 22 8.1 Dimensional and marking requirements . 22 8.2 Performance requirements 22 Annex A (informative) Refer
39、ence connector details 29 Annex B (normative) Sample size and product sourcing requirements 30 Annex C (normative) Requirements of the launch modal condition . 31 Bibliography 32 Figure 1 Outline dimensions Plug 11 Figure 2 Outline dimensions Adaptor (Variant number: A01) . 12 Figure 3 Duplex adapto
40、r SC cutout (Variant number: A02) 13 BS EN 62664-1-1:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-62664-1-1 IEC:2013 3 Figure 4 Plug connector interface refere
41、nce planes . 14 Figure 5 Plug connector interface 14 Figure 6 Duplex plug interface . 15 Figure 7 Ferrule endface geometry After termination . 16 Figure 8 Ferrule endface Geometry Allowable undercut BK versus ferrule endface radius BF (After termination) . 17 Figure 9 Adaptor interface 18 Figure 10
42、Junior (Jr) Adaptor interface (optional Note e of Table 7) 19 Figure 11 Duplex adaptor interface 20 Figure 12 Pin gauge for adaptor . 21 Table 1 Preferred colour scheme . 9 Table 2 Plug fibre / cable variants with fibre category IEC 60793-2-10 Type A1a . 10 Table 3 Adaptor Variants . 10 Table 4 Iden
43、tification plug fibre / cable variants with fibre category IEC 60793-2-10 10 Table 5 Adaptor variants 10 Table 6 Dimensions of the plug connector interface . 15 Table 7 Dimensions of the adaptor connector interface (1 of 2) 20 Table 8 Performance requirements (1 of 7) 23 Table A.1 Details for refere
44、nce connector 29 Table B.1 Sample size and product sourcing requirements 30 Table C.1 Normative EF requirements for 50 m core fibre at 850 nm 31 BS EN 62664-1-1:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reproduction or net
45、working permitted without license from IHS-,-,- 6 62664-1-1 IEC:2013 COVER SHEET Connector sets and interconnect components to be used in optical fibre communication systems Product specifications Part 1-1: LC-PC duplex multimode terminated on IEC 60793-2-10 category A1a fibre Description Performanc
46、e Coupling mechanism: latch push-pull Configuration: plug/adaptor/plug Fibre category: IEC 60793-2-10, category A1a Cable type see Clause 4 Application: Random mate attenuation: Random mate return loss: For use in customer premises IEC category C environment Grade BM: 0,60 dB for 97% and 0,35 dB mea
47、n 850 nm Grade CM: 1,0 dB for 97% and 0.50 dB mean 850 nm 20 dB Outline and maximum dimensions: 76 Ref. 57 Ref. R25 Min. R25 Min. 51 Max. 32 Max. IEC 462/13 BS EN 62664-1-1:2013Copyright British Standards Institution Provided by IHS under license with BSI - Uncontrolled Copy Not for ResaleNo reprodu
48、ction or networking permitted without license from IHS-,-,-62664-1-1 IEC:2013 7 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS FIBRE OPTIC CONNECTOR PRODUCT SPECIFICATIONS Part 1-1: LC-PC duplex multimode connectors terminated on IEC 60793-2-10 category A1a fibre 1 Scope This International Standard contains the initial, start-of-life dimensional, optical, mechanical and environmental performance requirements which a terminated and assembled multimode resilient alignment sleeve LC
