BS EN ISO 105-E09-2010 Textiles - Tests for colour fastness - Colour fastness to potting《纺织品 色牢度试验 耐沸水腐蚀色牢度》.pdf

上传人:eventdump275 文档编号:578800 上传时间:2018-12-13 格式:PDF 页数:12 大小:351.52KB
下载 相关 举报
BS EN ISO 105-E09-2010 Textiles - Tests for colour fastness - Colour fastness to potting《纺织品 色牢度试验 耐沸水腐蚀色牢度》.pdf_第1页
第1页 / 共12页
BS EN ISO 105-E09-2010 Textiles - Tests for colour fastness - Colour fastness to potting《纺织品 色牢度试验 耐沸水腐蚀色牢度》.pdf_第2页
第2页 / 共12页
BS EN ISO 105-E09-2010 Textiles - Tests for colour fastness - Colour fastness to potting《纺织品 色牢度试验 耐沸水腐蚀色牢度》.pdf_第3页
第3页 / 共12页
BS EN ISO 105-E09-2010 Textiles - Tests for colour fastness - Colour fastness to potting《纺织品 色牢度试验 耐沸水腐蚀色牢度》.pdf_第4页
第4页 / 共12页
BS EN ISO 105-E09-2010 Textiles - Tests for colour fastness - Colour fastness to potting《纺织品 色牢度试验 耐沸水腐蚀色牢度》.pdf_第5页
第5页 / 共12页
亲,该文档总共12页,到这儿已超出免费预览范围,如果喜欢就下载吧!
资源描述

1、BS EN ISO 105-E09:2010ICS 59.080.01NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDTextiles Tests forcolour fastnessPart E09: Colour fastness to potting(ISO 105-E09:2010)This British Standardwas published under theauthority of the StandardsPolicy and StrategyCom

2、mittee on 31 May 2010 BSI 2010ISBN 978 0 580 65749 8Amendments/corrigenda issued since publicationDate CommentsBS EN ISO 105-E09:2010National forewordThis British Standard is the UK implementation of EN ISO 105-E09:2010. It supersedes BS EN ISO 105-E09:1997 which is withdrawn.The UK participation in

3、 its preparation was entrusted to TechnicalCommittee TCI/81, Colour fastness and colour measurement of textiles.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Use

4、rs are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 105-E09 April 2010 ICS 59.080.01 Supersedes EN ISO 105-E09:1997English Version Textiles - Tests for colour fastness

5、- Part E09: Colour fastness to potting (ISO 105-E09:2010) Textiles - Essais de solidit des coloris - Partie E09: Solidit des coloris au dcatissage leau bouillante (ISO 105-E09:2010) Textilien - Farbechtheitsprfungen - Teil E09: Farbechtheit gegen siedendes Wasser (Pottingechtheit) (ISO 105-E09:2010)

6、 This European Standard was approved by CEN on 22 March 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical refe

7、rences concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member

8、 into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,

9、Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-

10、1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 105-E09:2010: EBS EN ISO 105-E09:2010EN ISO 105-E09:2010 (E) 3 Foreword This document (EN ISO 105-E09:2010) has been prepared by Technical Committee ISO/TC 38 “

11、Textiles“ in collaboration with Technical Committee CEN/TC 248 “Textiles and textile products” the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2010

12、, and conflicting national standards shall be withdrawn at the latest by October 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights.

13、 This document supersedes EN ISO 105-E09:1997. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Fra

14、nce, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 105-E09:2010 has been approved by CEN as a EN ISO 10

15、5-E09:2010 without any modification. BS EN ISO 105-E09:2010ISO 105-E09:2010(E) ISO 2010 All rights reserved iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards i

16、s normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take par

17、t in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to p

18、repare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility tha

19、t some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 105-E09 was prepared by Technical Committee ISO/TC 38, Textiles, Subcommittee SC 1, Tests for coloured textiles and colorants. This fourth

20、 edition cancels and replaces the third edition (ISO 105-E09:1989), of which Clauses 2, 4 and 5 have been technically revised and instrumental measurement added to the appropriate clauses. It incorporates ISO 105-E09:1989/Cor.1:2002. ISO 105 consists of many parts designated by a part letter and a t

21、wo-digit serial number (e.g. A01), under the general title Textiles Tests for colour fastness. A complete list of these parts is given in ISO 105-A01. BS EN ISO 105-E09:2010BS EN ISO 105-E09:2010INTERNATIONAL STANDARD ISO 105-E09:2010(E) ISO 2010 All rights reserved 1Textiles Tests for colour fastne

22、ss Part E09: Colour fastness to potting 1 Scope This part of ISO 105 specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to the action of boiling water. It is mainly applicable to wool and textiles containing wool. 2 Normative references The foll

23、owing referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 105-A01, Textiles Tests for colour fastness Part A01:

24、 General principles of testing ISO 105-A02, Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour ISO 105-A03, Textiles Tests for colour fastness Part A03: Grey scale for assessing staining ISO 105-A04, Textiles Tests for colour fastness Part A04: Method for the inst

25、rumental assessment of the degree of staining of adjacent fabrics ISO 105-A05, Textiles Tests for colour fastness Part A05: Instrumental assessment of change in colour for determination of grey scale rating ISO 105-F01, Textiles Tests for colour fastness Part F01: Specification for wool adjacent fab

26、ric ISO 105-F02, Textiles Tests for colour fastness Part F02: Specification for cotton and viscose adjacent fabrics ISO 105-F03, Textiles Tests for colour fastness Part F03: Specification for polyamide adjacent fabric ISO 105-F04, Textiles Tests for colour fastness Part F04: Specification for polyes

27、ter adjacent fabric ISO 105-F05, Textiles Tests for colour fastness Part F05: Specification for acrylic adjacent fabric ISO 105-F06, Textiles Tests for colour fastness Part F06: Specification for silk adjacent fabric ISO 105-F07, Textiles Tests for colour fastness Part F07: Specification for seconda

28、ry acetate adjacent fabric ISO 3696, Water for analytical laboratory use Specification and test methods BS EN ISO 105-E09:2010ISO 105-E09:2010(E) 2 ISO 2010 All rights reserved3 Principle A specimen of the textile between adjacent fabrics is rolled around a glass rod and treated with boiling water.

29、The specimen and the adjacent fabrics are dried separately. The change in colour of the specimen and the staining of the adjacent fabrics are assessed with the grey scales or instrumentally. 4 Apparatus 4.1 Vessel equipped with reflux condenser, to hold a cylindrical specimen (40 2) mm long in boili

30、ng water. 4.2 Glass rod, 5 mm to 8 mm in diameter. 4.3 Wool adjacent fabric, measuring (40 2) mm (100 2) mm, complying with ISO 105-F01. 4.4 Cotton adjacent fabric, complying with ISO 105-F02, or in the case of blends, adjacent fabric made from the predominant fibre admixtured with the wool as indic

31、ated in Table 1, measuring (40 2) mm (100 2) mm, and complying with the relevant part of ISO 105-F01 to ISO 105-F07. Table 1 Single-fibre adjacent fabrics If first piece is: Second piece is to be: Cotton Wool Wool CottonViscose Wool Polyamide Wool or cotton Polyester Wool or cotton Acrylic Wool or c

32、otton 4.5 Grey scale for assessing change in colour, complying with ISO 105-A02. 4.6 Grey scale for assessing staining, complying with ISO 105-A03. 4.7 Spectrophotometer or colorimeter for assessing change in colour and staining, complying with ISO 105-A04 and ISO 105-A05. 4.8 Analytical balance, ac

33、curate to 0,01 g (see ISO 105-A01). 5 Reagents 5.1 Grade 3 water, complying with ISO 3696. 6 Test specimen 6.1 If the textile to be tested is fabric, place a specimen measuring (40 2) mm (100 2) mm between the two adjacent fabrics (4.3 and 4.4) and sew along one of the shorter sides to form a compos

34、ite specimen. 6.2 If the textile to be tested is yarn, knit it into fabric and treat it as in 6.1 or form a layer of parallel lengths of it between the two adjacent fabrics (4.3 and 4.4), the amount of yarn taken being approximately equal to BS EN ISO 105-E09:2010ISO 105-E09:2010(E) ISO 2010 All rig

35、hts reserved 3half the combined mass of the adjacent fabrics. Sew along two opposite sides to hold the yarn in place and to form a composite specimen. 6.3 If the textile to be tested is loose fibre, comb and compress an amount approximately equal to half the combined mass of the adjacent fabrics (4.

36、3 and 4.4) into a sheet measuring (40 2) mm (100 2) mm. Place the sheet between the two adjacent fabrics and sew along all four sides to hold the fibres in place and to form a composite specimen. 7 Procedure 7.1 Roll the composite specimen compactly around the glass rod to form a cylinder (40 2) mm

37、long and tie it uniformly, but not tightly, with thread. 7.2 Treat the specimen on the rod for 1 h in boiling water (5.1), at a liquor ratio of 30:1, under reflux. 7.3 Open out the composite specimen (by breaking the stitching on all sides, except one of the shorter sides, if necessary) and dry it b

38、y hanging it in the air at a temperature not exceeding 60 C, with the three parts in contact only at the line of stitching. 7.4 Assess the change in colour of the specimen and the staining of the adjacent fabric(s) with reference to the original specimen and adjacent fabric(s) by comparison with the

39、 grey scales (4.5 and 4.6) and/or instrumentally (see 4.7). 8 Test report The test report shall include the following information: a) a reference to this part of ISO 105 (ISO 105-E09:2010); b) all details necessary for the identification of the sample tested; c) the numerical grey scale ratings and/

40、or instrumental assessment for the change in colour of the specimen; d) the numerical grey scale rating and/or instrumental assessment for staining of the adjacent fabrics used; e) any deviation, by agreement or otherwise, from the procedure specified. BS EN ISO 105-E09:2010ISO 105-E09:2010(E) 4 ISO

41、 2010 All rights reservedBibliography 1 ISO 105-J01, Textiles Tests for colour fastness Part J01: General principles for measurement of surface colour 2 ISO 105-J03, Textiles Tests for colour fastness Part J03: Calculation of colour differences BS EN ISO 105-E09:2010BS EN ISO 105-E09:2010BSI GroupHe

42、adquarters 389Chiswick High Road,London, W4 4AL, UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 - British Standards InstitutionBSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at theinternational level. It is incorporat

43、ed by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments oreditions.It is the constant aim of BSI to improve the quality of our products and services.We would be grateful if anyone finding

44、an inaccuracy or ambiguity while usingthis British Standard would inform the Secretary of the technical committeeresponsible, the identity of which can be found on the inside front cover. Tel:+44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS

45、which ensuresthat subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should beaddressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 89967001 Email: You may also buy directly using

46、 a debit/creditcard from the BSI Shop on the Website http:/ response to orders for international standards, it is BSI policy to supply theBSI implementation of those that have been published as British Standards,unless otherwise requested.Information on standardsBSI provides a wide range of informat

47、ion on national, European andinternational standards through its Library and its Technical Help to ExportersService. Various BSI electronic information services are also available whichgive details on all its products and services. Contact Information Centre. Tel:+44 (0)20 8996 7111 Fax: +44 (0)20 8

48、996 7048 Email: Subscribing members of BSI are kept up to date with standards developmentsand receive substantial discounts on the purchase price of standards. For detailsof these and other benefits contact Membership Administration. Tel: +44 (0)208996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via British StandardsOnline can be found at http:/ information about BSI is available on the BSI website at http:/.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in theUK, of the publications of the inte

展开阅读全文
相关资源
  • BS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdfBS ISO IEC 29150-2011 Information technology Security techniques Signcryption《信息技术 安全技术 签密》.pdf
  • BS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdfBS ISO IEC 15408-1-2009 Information technology - Security techniques - Evaluation criteria for IT Security - Introduction and general model《信息技术 安全技术 IT安全评价准则 一.pdf
  • BS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdfBS ISO 7295-1988+A1-2014 Tyre valves for aircraft Interchangeability dimensions《飞机轮胎汽门嘴 互换性尺寸》.pdf
  • BS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdfBS ISO 15118-1-2013 Road vehicles Vehicle to grid communication interface General information and use-case definition《道路车辆 车辆到电力通讯接口 通用信息和使用案例定义》.pdf
  • BS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdfBS ISO 13765-2-2004 Refractory mortars - Determination of consistency using the reciprocating flow table method《耐熔灰浆 使用往复流动表法测定一致性》.pdf
  • BS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdfBS ISO 10998-2008+A1-2014 Agricultural tractors Requirements for steering《农业拖拉机 操纵要求》.pdf
  • BS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdfBS Z 9-1998 Space data and information transfer systems - Advanced orbiting systems - Networks and data links - Architectural specification《空间数据和信息传输系统 高级轨道系统 网络和数据链接 结构规范》.pdf
  • BS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdfBS Z 7-1998 Space data and information transfer systems - ASCII encoded English《空间数据和信息传输系统 ASCII 编码英语》.pdf
  • BS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdfBS Z 5-1997 Space data and information transfer systems - Standard formatted data units - Control authority procedures《航天数据和信息发送系统 标准格式数据单元 控制授权程序》.pdf
  • BS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdfBS Z 4-1997 Space data and information transfer systems - Standard formatted data units - Structure and construction rules《航天数据和信息传输系统 标准格式数据单元 结构和构造规则》.pdf
  • 猜你喜欢
    相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > BS

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1