1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 1833-10:2010Textiles Quantitativechemical analysisPart 10: Mixtures of triacetate or polylactideand certain other fibres (method usingdichloromethane) (ISO 1833-10:2006
2、)Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:37, Uncontrolled Copy, (c) BSIBS EN ISO 1833-10:2010 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO1833-10:2010. It is identical to ISO 1833-10:2006. It supersedes BS4407:1988 which will
3、be withdrawn on publication of the otherparts of the BS EN ISO 1833 series.The UK participation in its preparation was entrusted to TechnicalCommittee TCI/100, Co-ordination of activities in textiles andclothing.A list of organizations represented on this committee can beobtained on request to its s
4、ecretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2011ISBN 978 0 580 72131 1ICS 59.060.01Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was publ
5、ished under the authority of theStandards Policy and Strategy Committee on 28 February 2011.Amendments issued since publicationDate Text affectedLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:37, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO
6、 1833-10 October 2010 ICS 59.060.20 English Version Textiles - Quantitative chemical analysis - Part 10: Mixtures of triacetate or polylactide and certain other fibres (method using dichloromethane) (ISO 1833-10:2006) Textiles - Analyse chimique quantitative - Partie 10: Mlanges de triactate ou de p
7、olylactide et de certaines autres fibres (mthode au dichloromthane) (ISO 1833-10:2006) Textilien - Quantitative chemische Analysen - Teil 10: Mischungen aus Triacetat- oder Polylactidfasern und bestimmten anderen Fasern (Dichlormethan-Verfahren) (ISO 1833-10:2006) This European Standard was approved
8、 by CEN on 12 September 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
9、standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notif
10、ied to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxemb
11、ourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All right
12、s of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 1833-10:2010: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:37, Uncontrolled Copy, (c) BSIBS EN ISO 1833-10:2010EN ISO 1833-10:2010 (E) 3 Foreword The text of ISO 1833-
13、10:2006 has been prepared by Technical Committee ISO/TC 38 “Textiles” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 1833-10:2010 by Technical Committee CEN/TC 248 “Textiles and textile products”, the secretariat of which is held by BSI. This European S
14、tandard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2011, and conflicting national standards shall be withdrawn at the latest by April 2011. Attention is drawn to the possibility that some of the elements of t
15、his document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European St
16、andard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the Unit
17、ed Kingdom. Endorsement notice The text of ISO 1833-10:2006 has been approved by CEN as EN ISO 1833-10:2010 without any modification. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:37, Uncontrolled Copy, (c) BSIBS EN ISO 1833-10:2010ISO 1833-10:2006(E) ISO 2006 All rights reser
18、ved iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for wh
19、ich a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all
20、matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are ci
21、rculated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held respo
22、nsible for identifying any or all such patent rights. ISO 1833-10 was prepared by Technical Committee ISO/TC 38, Textiles. This first edition of ISO 1833-10 cancels and replaces Clause 9 of ISO 1833:1977. ISO 1833:1977 will be cancelled and replaced by ISO 1833-1, ISO 1833-3, ISO 1833-4, ISO 1833-5,
23、 ISO 1833-6, ISO 1833-7, ISO 1833-8, ISO 1833-9, ISO 1833-10, ISO 1833-11, ISO 1833-12, ISO 1833-13, ISO 1833-14, ISO 1833-15, ISO 1833-16, ISO 1833-17, ISO 1833-18 and ISO 1833-19. ISO 1833 consists of the following parts, under the general title Textiles Quantitative chemical analysis: Part 1: Gen
24、eral principles of testing Part 2: Ternary fibre mixtures Part 3: Mixtures of acetate and certain other fibres (method using acetone) Part 4: Mixtures of certain protein and certain other fibres (method using hypochlorite) Part 5: Mixtures of viscose, cupro or modal and cotton fibres (method using s
25、odium zincate) Part 7: Mixtures of polyamide and certain other fibres (method using formic acid) Part 8: Mixtures of acetate and triacetate fibres (method using acetone) Part 9: Mixtures of acetate and triacetate fibres (method using benzyl alcohol) Part 10: Mixtures of triacetate or polylactide and
26、 certain other fibres (method using dichloromethane) Part 11: Mixtures of cellulose and polyester fibres (method using sulfuric acid) Part 12: Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastanes and certain other fibres (method using dimethylformamide) Part 13: Mixtures
27、 of certain chlorofibres and certain other fibres (method using carbon disulfide/acetone) Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:37, Uncontrolled Copy, (c) BSIBS EN ISO 1833-10:2010ISO 1833-10:2006(E) iv ISO 2006 All rights reserved Part 14: Mixtures of acetate and cert
28、ain chlorofibres (method using acetic acid) Part 15: Mixtures of jute and certain animal fibres (method by determining nitrogen content) Part 16: Mixtures of polypropylene fibres and certain other fibres (method using xylene) Part 17: Mixtures of chlorofibres (homopolymers of vinyl chloride) and cer
29、tain other fibres (method using sulfuric acid) Part 18: Mixtures of silk and wool or hair (method using sulfuric acid) Part 19: Mixtures of cellulose fibres and asbestos (method by heating) Part 21: Mixtures of chlorofibres, certain modacrylics, certain elastanes, acetates, triacetates and certain o
30、ther fibres (method using cyclohexanone) The following parts are under preparation: Part 6: Mixtures of viscose or certain types of cupro or modal or lyocell and cotton fibres (method using formic acid and zinc chloride) Part 20: Mixtures of elastane and certain other fibres (method using dimethylac
31、etamide) Part 22: Mixtures of viscose or certain types of cupro or modal or lyocell and flax fibres (method using formic acid and zinc chlorate) Part 23: Mixtures of polyethylene and polypropylene (method using cyclohexanone) Part 24: Mixtures of polyester and some other fibres (method using phenol
32、and tetrachloroethane) Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:37, Uncontrolled Copy, (c) BSIBS EN ISO 1833-10:2010INTERNATIONAL STANDARD ISO 1833-10:2006(E) ISO 2006 All rights reserved 1Textiles Quantitative chemical analysis Part 10: Mixtures of triacetate or polylact
33、ide and certain other fibres (method using dichloromethane) 1 Scope This part of ISO 1833 specifies a method, using dichloromethane, to determine the percentage of triacetate, after removal of non-fibrous matter, in textiles made of binary mixtures of triacetate or polylactide and wool, regenerated
34、protein, cotton (scoured, kiered, or bleached), viscose, cupro, modal, polyamide, polyester, acrylic and glass fibres. Triacetate fibres which have received a finish leading to partial hydrolysis cease to be completely soluble in the reagent. In such cases, this method is not applicable. 2 Normative
35、 references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 1833-1, Textiles Quantitative che
36、mical analysis Part 1: General principles of testing 3 Principle The triacetate fibre is dissolved out from a known dry mass of the mixture, with dichloromethane. The residue is collected, washed, dried and weighed; its mass, corrected if necessary, is expressed as a percentage of the dry mass of th
37、e mixture. The percentage of triacetate is found by the difference. 4 Reagents Use the reagents described in ISO 1833-1 together with that given in 4.1. 4.1 Dichloromethane (methylene chloride). SAFETY PRECAUTIONS The toxic effects of this reagent shall be borne in mind and full precautions shall be
38、 taken during use. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:37, Uncontrolled Copy, (c) BSIBS EN ISO 1833-10:2010ISO 1833-10:2006(E) 2 ISO 2006 All rights reserved5 Apparatus Use the apparatus described in ISO 1833-1 together with that given in 5.1. 5.1 Conical flask, mini
39、mum capacity 200 ml, glass-stoppered. 6 Test procedure Follow the general procedure given in ISO 1833-1, and then proceed as follows. To the specimen contained in the conical flask, add 100 ml of dichloromethane per gram of specimen. Insert the stopper, shake the flask to wet out the specimen, and a
40、llow the flask to stand for 30 min, shaking it at intervals of about 10 min. Decant the liquid through the weighed filter crucible. Add 60 ml of dichloromethane to the residue in the flask, shake it by hand, and filter the contents of the flask through the filter crucible. Transfer any residual fibr
41、es to the crucible by washing out the flask with a little more dichloromethane. Drain the crucible using suction, refill the crucible with dichloromethane, and allow it to drain under gravity. Finally, drain the crucible using suction. Rinse with hot water, dry the crucible and residue, then cool an
42、d weigh them. 7 Calculation and expression of results Calculate the results as described in the general instructions of ISO 1833-1. The value of d is 1,00 except for polyester fibre, for which d is 1,01. In the case of triacetate that is not completely soluble in the reagent, the percentage of triac
43、etate is calculated using a value of d = 1,02. The percentage of triacetate thus calculated should be deducted from 100 to give the percentage of the other fibre. 8 Precision On a homogeneous mixture of textile materials, the confidence limits of the results obtained by this method are not greater t
44、han 1 for the confidence level of 95 %. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:37, Uncontrolled Copy, (c) BSIBS EN ISO 1833-10:2010Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:37, Uncontrolled Copy, (c) BSIThis page deliberately left blankLicense
45、d Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:37, Uncontrolled Copy, (c) BSIThis page deliberately left blankLicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 26/05/2011 07:37, Uncontrolled Copy, (c) BSIBSI is the independent national body responsible for preparing British Stand
46、ardsand other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.British Standards Institution (BSI)raising standards worldwideBSI Group Headquarters389 Chiswick High Road London
47、 W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards are updated by amendment or revision. Users of British Stan-dards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and serv-ices. We would be gratef
48、ul if anyone finding an inaccuracy or ambiguity whileusing this British Standard would inform the Secretary of the technical com-mittee responsible, the identity of which can be found on the inside frontcover.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers Members an individual updating
49、service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the website addition all orders for BSI, international and foreign standards publicationscan be addressed to BSI Customer Services.Tel
